|
Project __________________________________ |
|
|
Item ____________________________________ |
|
|
Quantity ________________________________ |
|
N8100NB |
CSI Section 11400 |
|
Approved _______________________________ |
||
|
Date ____________________________________
Narrow Drop-In Self Contained Mechanically Cooled Refrigerated Cold Pans
Models
•N8146NB Two 12” x 20” pan capacity
•N8168NB Three 12” x 20” pan capacity
N8168NB (pans by others)
Standard Features |
Options & |
• Integral V-stamped pan rest |
Accessories |
|
•20-gauge stainless steel top construction
• 2 BF stainless steel interior liner wrapped |
• |
Custom sizes and styles |
|
|
and spot clipped with refrigeration lines; |
• |
Single or double service flip-up |
|
thermal transfer compound is applied for |
|
sneezeguards |
|
superior cooling |
• |
Relocate compressor |
• Adapter bars are provided standard for 12” |
• |
Mullion fan assembly |
|
|
x 20” openings |
• |
Adapter bars |
• |
Standard 1” plastic drain |
• |
220V/50 cycle* |
• |
High density Environmentally friendly, |
* |
Inclusion of this option will alter the |
|
Kyoto Protocol Compliant, Non ODP (Ozone |
|
electrical specifications of the unit |
|
Depletion Potential), Non GWP (Global |
|
|
|
Warming Potential) polyurethane foam |
|
|
|
insulation throughout unit |
|
|
•Galvanized exterior body
•Non-marring press fit top gasket
•Condensing unit is suspended below on a 16-gauge galvanized frame
•HFC-134A refrigerant
•8’ cord and plug
•Stainless steel louver provided for field installation
•One year parts and 90 day labor standard warranty
Specifications
Top is one-piece 20-gauge stainless steel. Interior liner is 22-gauge stainless steel and is creased to a 1.00” (2.5cm) diameter drain. Integral V-stamped pan rest recessed 2" (5cm) to accommodate 12” x 20” (30cm x 51cm) pans 4” (10cm) or 6” (15cm) deep supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (29˚C) ambient room temperature, meeting NSF 7 requirements. Adapter bars for 12” x 20” (30cm x 51cm) pans are standard.
Sides are wrapped with refrigeration lines. Sides and bottom are fully insulated with high-density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) closed-cell polyurethane. Exterior housing is 24-gauge galvanized steel.
Condensing unit is suspended below the cold pan on a 16gauge steel frame and uses HFC-134a refrigerant. Temperature control has ON/OFF position to shut down cold pan. Unit has an 8’ (2.4m) cord and NEMA 5-15P plug.
A stainless steel louver is provided for field installation on the front of the cabinet, 4" below top of counter; cutout dimension for each is 12” x 23.5” (30cm x 60cm).
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
|
|
Mt. Pleasant, Michigan 48858 |
www.delfield.com |
||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
<![endif]>Pans Cold Refrigerated Cooled Mechanically Contained Self In-Drop Narrow N8100NB: