Delfield DC-L3, DC-L4, DC-L5, DC-L6 General Manual

		Project ___________________________________
		Item _____________________________________
	Concepts™ Serving Systems	Quantity _ ________________________________
		CSI Section 11400
	Self-Contained LiquiTec® Cold Pan Serving Counter	Approved _ _______________________________
		Date _____________________________________

Models

•DC-L2 Self-contained LiquiTec® cold pan serving counter, fits two standard 12”x20” pans

•DC-L3 Self-contained LiquiTec® cold pan serving counter, fits three standard 12”x20” pans

•DC-L4 Self-contained LiquiTec® cold pan serving counter, fits four standard 12”x20” pans

•DC-L5 Self-contained LiquiTec® cold pan serving counter, fits five standard 12”x20” pans

•DC-L6 Self-contained LiquiTec® cold pan serving counter, fits six standard 12”x20” pans

	Standard Features
	• Heavy duty stainless steel top
	• Reinforced			stainless steel front and rear
		removable panels
	• Heavy duty base support structure
	• Standard on 6” legs
	•	Flush mounted pans
	• Individual 0.5” stainless steel drains
	• Thermostat for temperature control
	• High		density		foamed in place
		environmentally friendly,				Kyoto	Protocol
		Compliant, Non ODP (Ozone Depletion
		Potential), Non GWP (Global Warming
		Potential)		polyurethane		keeps energy
		costs low
DC-L4	• Must be hard wired in field
	•	One	year	parts	and	labor	standard
		warranty

Options &

Accessories

•Custom lengths available per inch

•Granite, Hanstone and Solid Surface top materials

•Laminated base panels

•Finished stainless steel or laminated end panels

•Décor panels

•Graphics packages

•FlexiShield® foodshields

•Signage with overstructures, lights and heatlamps

•Refrigerated base inserts

•Heated base inserts

•Dry storage base inserts

•Mechanical access doors

•Casters (stand alone units only)

•Kickplates (units with legs only)

•Tray slides

•Adapter plates and bars

•Remote refrigerant (specify refrigerant)

•220v/50 cycle*

*Inclusion of this option will alter electrical specifications of the unit

Specifications

Exterior body is constructed of 0.75” Melamine reinforced front and rear panels with 22 gauge stainless steel skin and 1” polyethylene horizontal rib supports. Horizontal brace on rear is constructed of 18 gauge galvanized steel. The exterior ends are unfinished.

Exterior top is constructed of 14 gauge stainless steel. Horizontal top supports on front and rear are constructed with 18 gauge galvanized steel.

Interior base bottom is constructed of 16 gauge galvanized steel. Vertical base support braces are 14 gauge galvanized steel. Top end supports are 12 gauge stainless steel.

The LiquiTec® cold pan has 2-6 die stamped 19.87” x 11.87” (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25” (15.9cm) deep with 0.5” drain manifold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12” x 20” (30.5cm x 50.8cm) pans 4” (7.6cm) or 6” (15.2cm) deep, supplied by others. Product temperatures of 33˚F (1˚C) to 41˚F (5˚C) are maintained at 86˚F (30˚C) ambient room temperature, meeting NSF7

requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation. Cold pans are equipped with a 0.5” stainless steel drain plumbed to the drain valve located behind the hinged louvered door.

Refrigeration system uses HFC-404A refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable cold pan thermostat control.

Legs: Bases mounted on 6.12” adjustable legs.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	www.delfield.com
	Mt. Pleasant, Michigan 48858
		Fax: [phone]

<![if ! IE]>

<![endif]>Counter Serving Pan Cold LiquiTec® Contained-Self Systems: Serving Concepts™