P O W E R E DDSR
SPEAKERS series
POWERED SPEAKER |
|
POWERED SUBWOOFER |
|
||
DSR112 DSR115 DSR215 |
|
DSR118W |
|
|
|
|
|
OWNER’S MANUAL |
|
|
|
|
|
BEDIENUNGSANLEITUNG |
|
|
|
|
|
MODE D’EMPLOI |
EN |
|
|
|
MANUAL DE INSTRUCCIONES |
|
DE |
|
|
|
|
|
FR |
|
|
|
MANUALE DI ISTRUZIONI |
|
ES |
|
|
|
|
|
IT |
|
|
RU |
|
|
|
|
|
ZH |
|
|
|
|
|
JA |
|
|
|
|
|
Italiano Español Français Deutsch English
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The above warning is located on the rear of the unit.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11Only use attachments/accessories specified by the manufacturer.
12Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13Unplug this apparatus during lightning storms or when unused for long periods of time.
14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(UL60065_03)
2DSR112/DSR115/DSR215/DSR118W Owner’s Manual
FCC INFORMATION (U.S.A.) |
|
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! |
all installations. If this product is found to be the source of |
This product, when installed as indicated in the instructions |
interference, which can be determined by turning the unit |
contained in this manual, meets FCC requirements. Modifi- |
“OFF” and “ON”, please try to eliminate the problem by |
cations not expressly approved by Yamaha may void your |
using one of the following measures: |
authority, granted by the FCC, to use the product. |
Relocate either this product or the device that is being |
|
|
2. IMPORTANT: When connecting this product to accessories |
affected by the interference. |
and/or another product use only high quality shielded |
Utilize power outlets that are on different branch (circuit |
cables. Cable/s supplied with this product MUST be used. |
|
Follow all installation instructions. Failure to follow instruc- |
breaker or fuse) circuits or install AC line filter/s. |
tions could void your FCC authorization to use this product |
In the case of radio or TV interference, relocate/reorient the |
in the USA. |
|
|
antenna. If the antenna lead-in is 300 ohm ribbon lead, |
3. NOTE: This product has been tested and found to comply |
change the lead-in to co-axial type cable. |
with the requirements listed in FCC Regulations, Part 15 for |
|
Class “B” digital devices. Compliance with these require- |
If these corrective measures do not produce satisfactory |
ments provides a reasonable level of assurance that your |
results, please contact the local retailer authorized to distrib- |
use of this product in a residential environment will not result |
ute this type of product. If you can not locate the appropriate |
in harmful interference with other electronic devices. This |
retailer, please contact Yamaha Corporation of America, |
equipment generates/uses radio frequencies and, if not |
Electronic Service Division, 6600 Orangethorpe Ave, Buena |
installed and used according to the instructions found in the |
Park, CA90620 |
users manual, may cause interference harmful to the opera- |
|
tion of other electronic devices. Compliance with FCC regu- |
The above statements apply ONLY to those products distrib- |
lations does not guarantee that interference will not occur in |
uted by Yamaha Corporation of America or its subsidiaries. |
|
|
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. |
(class B) |
In Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
In Norway: Apparatet må tilkoples jordet stikkontakt.
In Sweden: Apparaten skall anslutas till jordat uttag.
(class I hokuo)
DSR112/DSR115/DSR215/DSR118W Owner’s Manual |
3 |
|
|
English
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Power supply/Power cord
•Only use the voltage specified as correct for the device. The required voltage is printed on the name plate of the device.
•Use only the included power cord.
•Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.
•Be sure to connect to an appropriate outlet with a protective grounding connection. Improper grounding can result in electrical shock.
Do not open
•Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel.
Water warning
•Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. If any liquid such as water seeps into the device, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel.
•Never insert or remove an electric plug with wet hands.
If you notice any abnormality
•If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel.
•If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:
Power supply/Power cord
•Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms.
•When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.
Location
•If you use the pole socket on the DSR118W for mounting of the DSR112 or DSR115, use a pole no longer than 90cm (35-7/16") with an outer diameter of 35mm (1-3/8"). Use of any other size pole may cause the device to fall, and result in injury or damage to the internal components. Mounting a speaker other than the DSR112 or DSR115 may cause the speaker to fall, and result in damage to the speaker.
•Always consult qualified Yamaha service personnel if the device installation requires construction work, and make sure to observe the following precautions.
-Choose mounting hardware and an installation location that can support the weight of the device.
-Do not use a wall mounting bracket.
-Avoid locations that are exposed to constant vibration.
-Inspect the device periodically.
•When transporting or moving the device, always use two or more people. Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself.
•Do not hold the bottom of the device when transporting or moving it. In doing so, you may pinch your hands under the device, and result in injury.
•Before moving the device, remove all connected cables.
•When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
•Do not use the device in a confined, poorly-ventilated location. Make sure that there is adequate space between the device and surrounding walls or other devices: at least 30cm at the sides, 30cm behind and 30cm above. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.
•Do not press the rear panel of the device against the wall. Doing so may cause the plug to come in contact with the wall and detach from the power cord, resulting in short circuiting, malfunction, or even fire.
•Do not suspend the speaker sideways. Doing so may cause the device to topple, potentially resulting in damage or in injury.
•Do not use the speaker’s handles for suspended installation. Doing so can result in damage or injury.
(5)-8 1/2
4DSR112/DSR115/DSR215/DSR118W Owner’s Manual
•Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
•Do not place the device in an unstable position where it might accidentally fall over.
•Do not place the device in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction.
Connections
•Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.
Handling caution
•When turning on the AC power in your audio system, always turn on the device LAST, to avoid speaker damage. When turning the power off, the device should be turned off FIRST for the same reason.
•Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the power until the condensation has completely dried out.
•Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings on the device. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel.
•Do not use the device for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.
•Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire.
•Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons, switches or connectors.
•Do not pull on any attached cable, such that of a microphone. Doing so may cause the speaker to topple, and result in damage or in injury.
XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
Interference From Cell Phones
Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.
Always turn the power off when the device is not in use.
The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualified Yamaha service personnel about replacing defective components.
•The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
•The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.
•Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
(5)-8 2/2
English
DSR112/DSR115/DSR215/DSR118W Owner’s Manual |
5 |
|
|
English
Introduction
Introduction
Thank you for your purchase of the Yamaha DSR series powered speaker.
Please read this manual thoroughly to ensure optimum use of the DSR series for the longest possible period of time. Keep the manual in a safe place for future reference.
Contents
Introduction............................................................................. |
6 |
Setup Examples |
..................................................................... 9 |
Main Features of the DSR Series .......................................... |
6 |
Troubleshooting.................................................................... |
11 |
Controls and Functions .......................................................... |
7 |
References ........................................................................... |
71 |
Main Features of the DSR Series
DSR112 |
DSR115 |
■Speaker processing functionality provided by internal DSP (DSR112/DSR115/DSR215)
The internal DSP delivers high-resolution sound by using speaker processing functionality that has been optimized for each model of the DSR series.
■FIR-X tuning™ feature (DSR112/DSR115/DSR215)
Linear phase FIR filter provides natural sound quality and smooth frequency response without phase cancellation around the crossover point.
■D-CONTOUR (Dynamic CONTOUR) feature (DSR112/DSR115/DSR215)
D-CONTOUR is a newly developed three-band multiband compressor. It dynamically adjusts the level of each frequency range according to the volume of speaker outputs. It boosts the high and low frequencies when the volume level is low, and it reduces the amount of boost when the volume level is high. So that it delivers powerful sound tailored to human hearing. For example, this is useful for dance music, etc., if you want to emphasize the rhythm.
DSR215 |
DSR118W |
■Light and compact
Featuring class-D amplifier, switching power supply with PFC, and light powerful magnetic neodymium magnet (DSR112 and DSR115 only) provides top-level light and compact body in the class.
■Powerful protection function
Separate advanced protection circuits in the speaker unit, amplifier unit, and power supply unit ensure optimum reliability and long equipment life.
Included Accessories
•AC power cord
•Owner’s manual (this book)
6DSR112/DSR115/DSR215/DSR118W Owner’s Manual
Loading...