TL-WN851ND
Hardware Connection
1
Quick Installation Guide
300Mbps Wireless N PCI Adapter
MODEL NO. TL-WN851ND
7106503584
For Windows Vista
For Windows XP
You may see the Found New Hardware Wizard after the
adapter has been inserted. Please click ‘Cancel’.
Package Contents
System Requirement
· Windows 7 · Windows Vista · Windows XP
Resource CD
QIG
300Mbps Wireless Lite N PCI Adapter
MODEL NO. TL-WN851ND
Steps：
1. Turn o your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI slot and remove its slot cover.
Keep the screw.
3. Insert the adapter into the PCI slot as shown above.
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
6. Turn on your computer.
1
Insert the TP-LINK Resource CD into the CD-ROM
drive.
Find the appropriate model and choose
Install Driver&Utility.
2
Select Install TP-LINK Wireless Conguration
Utility and Driver and then click Next .
4
5
Click Change to specify the destination location
or you can leave it default. Click Next to continue.
6
Click Install to install the driver and utility for your
adapter.
TL-WN851ND
Software Installation
2
(The installtion procedures in Windows 7/ Vista/ XP are similar. Here takes the procedures in Windows 7 for example.)
The follwing screen will then appear.
Click Finish to complete the setup.
8
7
The drivers and utility will install. This may take
1~2 minutes.
The InstallShield Wizard window will appear.
Click Next to continue.
3
TL-WN851ND
300Mbps PCI
300Mbps Wireless N PCI Adapter
Loading...