Quick Installation Guide
Wireless 4G LTE Router
Images may differ from actual products.
©2019 TP-Link 7106508324 REV4.1.1
2. Verify the Hardware Connection
Check the following LEDs’ status. If the Internet LED is on, your router is connected to the internet successfully.
Power |
Internet |
Wi-Fi |
On |
On |
On |
Note: If the Internet LED does not turn on, please refer to Q2 of Need Help? in this guide.
For better internet connection, make sure 2 or 3 bars of the Signal Strength LED are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile network signal, such as near a window.
1. Connect the Hardware
a. Install the antennas
|
|
and position them |
|
|
|
upwards. |
|
|
|
b. Insert the Micro SIM |
|
|
|
card into the slot |
|
Power adapter |
|
until you hear a click. |
|
|
|
|
|
c. Connect the |
|
Router |
|
|
|
|
|
power adapter |
|
|
|
and turn on the |
|
|
|
router. |
! SIM card requirement |
|
|
|
+ |
+ |
Standard |
|
Micro SIM card Nano SIM card + Provided SIM card adapter + Provided sticker |
||
|
|
|
SIM card |
3. Enjoy the Internet
Wired
Connect your computers to the router's LAN ports via Ethernet cables.
Wireless
a.Find the SSID (network name) and wireless password printed on the label at the bottom of the router.
b.Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.