3-215-427-12 (1)
FM/AM
Compact Disc Player
Operating Instructions
Mode d’emploi
Owner’s Record
The model and serial numbers are located on the bottom of the unit. Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. |
|
Serial No. |
To cancel the demonstration (DEMO) display, see page 9.
Pour annuler l’affichage de démonstration (DEMO), reportez-vous à la page 10.
US
FR
CDX-GT320 CDX-GT32W CDX-GT220 CDX-GT22W CDX-GT120
© 2007 Sony Corporation
For installation and connections, see the supplied installation/connections manual.
Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
CAUTION
The use of optical instruments with this product will increase eye hazard.
CDX-GT320/GT32W/GT220/GT22W only
For the state of california, USA only
Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate
CDX-GT320/GT32W only
The “HD Radio Ready” logo indicates that this product will control a Sony HD RadioTM tuner (sold separately).
For HD RadioTM tuner operation, please refer to the HD RadioTM tuner Operating Instructions.
The HD Radio Ready logo is a registered trademark of iBiquity.
HD RadioTM is a trademark of iBiquity Digital Corp.
The “SAT Radio Ready” logo indicates that this
product will control a satellite
radio tuner module (sold separately). Please see your nearest authorized Sony dealer for details on the satellite radio tuner module.
“SAT Radio,” “SAT Radio Ready,” the SAT Radio and SAT Radio Ready logos and all related marks are trademarks of Sirius Satellite Radio Inc. and XM Satellite Radio Inc.
CDX-GT320/GT32W/GT220/GT22W only
Microsoft, Windows Media, and the Windows logo are
trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Warning if your car’s ignition has no ACC position
Be sure to set the Auto Off function (page 9). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain.
If you do not set the Auto Off function, press and hold (OFF) until the display disappears each time you turn the ignition off.
2
Table of Contents
About this manual . . . . . . . . . . . . . . . . . . . . . . . 4 Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting Started
Resetting the unit
(CDX-GT320/GT32W only) . . . . . . . . . . . . . . . 5 Preparing the card remote commander (CDXGT320/GT32W only) . . . . . . . . . . . . . . . . . . . . 5 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 5 Detaching the front panel . . . . . . . . . . . . . . . . . 5
Attaching the front panel . . . . . . . . . . . . . . . 5
Location of controls and basic operations
Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Card remote commander RM-X151 (CDX-GT320/GT32W only) . . . . . . . . . . . . 6
CD
Display items . . . . . . . . . . . . . . . . . . . . . . . . 8 Repeat and shuffle play. . . . . . . . . . . . . . . . . 8
Radio
Storing and receiving stations . . . . . . . . . . . . . . 8 Storing automatically — BTM . . . . . . . . . . . 8 Storing manually. . . . . . . . . . . . . . . . . . . . . . 8 Receiving the stored stations . . . . . . . . . . . . 8 Tuning automatically . . . . . . . . . . . . . . . . . . 8
Other functions
Changing the sound settings . . . . . . . . . . . . . . . 9 Adjusting the sound characteristics — BAL/ FAD/SUB . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Customizing the equalizer curve
— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Adjusting setup items — SET . . . . . . . . . . . . . . 9 Using optional equipment . . . . . . . . . . . . . . . . 10 Auxiliary audio equipment . . . . . . . . . . . . . 10
CD/MD changer
(CDX-GT320/GT32W only) . . . . . . . . . . . 10 Card remote commander RM-X114
(for CDX-GT220/GT22W). . . . . . . . . . . . . 11
Additional Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Notes on discs . . . . . . . . . . . . . . . . . . . . . . 12 Playback order of MP3/WMA files (CDXGT320/GT32W/GT220/GT22W only) . . . 13 About MP3 files (CDX-GT320/GT32W/ GT220/GT22W only). . . . . . . . . . . . . . . . . 13 About WMA files (CDX-GT320/GT32W/ GT220/GT22W only). . . . . . . . . . . . . . . . . 13
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Removing the unit. . . . . . . . . . . . . . . . . . . . . . 14 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 14 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 15 Error displays/Messages. . . . . . . . . . . . . . . 16
3
About this manual
This manual contains instructions for the CDX-GT320, GT32W, GT220, GT22W and GT120. The following chart shows the main differences between these models.
Check your model name, and refer to the difference indications in each section of this manual.
|
|
|
GT320 |
GT220 |
GT120 |
|
|
|
GT32W |
GT22W |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
Reset button |
z |
|
|
|
|
|
|
|
|
|
|
MP3/WMA |
z |
z |
|
|
|
playback |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD/MD |
z |
|
|
|
|
changer control |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Card remote |
z |
z |
|
|
|
commander |
|
||
|
|
(supplied) |
(option) |
|
|
|
|
available |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Welcome !
Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions.
•CD playback
You can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA files (page 13)*1).
Type of discs |
Label on the disc |
CD-DA
MP3*1
WMA*1
•Radio reception
–You can store up to 6 stations per band (FM1, FM2, FM3, AM1 and AM2).
–BTM (Best Tuning Memory): The unit selects strong signal stations and stores them.
•Sound adjustment
–EQ3 stage2: You can choose any one of 7 preset equalizer curves.
•Optional device operation*2
You can also control optional device, such as CD/MD changers, etc.
•Auxiliary equipment connection
An AUX input jack on the front of the unit allows connection of a portable audio device.
*1 CDX-GT320/GT32W/GT220/GT22W only
*2 CDX-GT320/GT32W only
4
Getting Started
Resetting the unit (CDX-GT320/ GT32W only)
Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.
Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen.
RESET button
Note
Pressing the RESET button will erase the clock setting and some stored contents.
To display the clock, press (DSPL). Press (DSPL) again to return to the previous display.
Detaching the front panel
You can detach the front panel of this unit to prevent theft.
Caution alarm
If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used.
1Press (OFF).
The unit is turned off.
2Press 
, then pull it off towards you.
Preparing the card remote
commander (CDX-GT320/GT32W only)
Before using the card remote commander for the first time, remove the insulation film.
Tip
For how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 13.
Setting the clock
The clock uses a 12-hour digital indication.
1Press and hold the select button.
The setup display appears.
2Press the select button repeatedly until “CLOCK-ADJ” appears.
3Press (SEEK) +.
The hour indication flashes.
4Rotate the volume control dial to set the hour and minute.
To move the digital indication, press (SEEK) –/+.
5Press the select button.
The setup is complete and the clock starts.
Notes
•Do not drop or put excessive pressure on the front panel and display window.
•Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray.
Attaching the front panel
Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks.
A
B
Note
Do not put anything on the inner surface of the front panel.
5
Location of controls and basic operations
Main unit
1 2 3 |
4 |
5 |
6 |
7 8 |
OFF |
|
PUSH SELECT |
|
|
|
|
|
|
EQ3 |
SOURCE |
|
|
|
|
|
AUX |
SEEK |
SEEK |
|
|
|
|
|
|
|
|
|
|
|
|
||
DSPL |
MODE |
|
|
|
|
|
|
|
|
|
REP |
SHUF |
|
PAUSE |
|
|
|
|
|
|
|||
|
BTM |
1 |
2 |
3 |
4 |
5 |
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
9 q;qaqsqdqf |
|
|
qg |
qh |
||||||||||||||
Card remote commander |
|
|
This section contains instructions on the location |
|||||||||||||||||
RM-X151 |
|
|
|
|
|
|
|
|
|
of controls and basic operations. |
||||||||||
|
|
|
|
|
|
|
|
|
For details, see the respective pages. |
|||||||||||
(CDX-GT320/GT32W only) |
|
|
||||||||||||||||||
|
|
For optional device (CD/MD changer, etc.) |
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
operation, see “Using optional equipment” on |
||||
1 |
|
|
|
|
|
|
|
|
|
|
|
|
w; |
page 10. The corresponding buttons on the card |
||||||
|
|
|
OFF |
|
ATT |
remote commander control the same functions as |
||||||||||||||
4 |
|
|
|
|
|
|
|
|
|
|
|
|
wa |
those on the unit. |
|
|
||||
|
|
|
SOURCE |
SEL |
MODE |
qs |
A OFF button |
|
|
|||||||||||
|
|
|
|
|
|
|
||||||||||||||
qj |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To power off; stop the source. |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
+ |
|
|
|
|
|
|
|
|
B EQ3 (equalizer) button |
page 9 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ws |
To select an equalizer type (XPLOD, |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
– |
|
|
|
|
|
|
|
|
VOCAL, EDGE, CRUISE, SPACE, |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GRAVITY, CUSTOM or OFF). |
|||||
qk |
|
|
|
|
|
|
|
|
|
|
|
|
|
wd |
||||||
|
|
|
|
DSPL |
|
SCRL |
|
|
|
C Volume control dial/select button |
||||||||||
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
1 |
|
2 |
3 |
|
|
|
|
|
|
wf |
page 9 |
|
|
|||
|
|
|
|
4 |
|
5 |
6 |
|
|
|
|
|
|
To adjust volume (rotate); select setup items |
||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
(press and rotate). |
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
+ |
|
|
|
|
|
|
|
|
D SOURCE button |
|
|
||
|
|
|
|
|
|
|
VOL |
|
|
|
|
|
|
|
|
|
|
|
|
|
ql |
|
|
|
|
|
|
|
|
|
|
|
|
|
To power on; change the source* (Radio/CD/ |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
–
AUX).
E Disc slot
Insert the disc (label side up), playback starts.
F Display window
G AUX input jack page 10
To connect a portable audio device.
H Z (eject) button
To eject the disc.
I 
(front panel release) button page 5
6
JDSPL (display)/SCRL (scroll) button (CDX-GT320/GT32W/GT220/GT22W) page 8
To change display items (press); scroll the display item (press and hold).
DSPL (display) button (CDX-GT120) page 8
To change display items.
KSEEK –/+ buttons
CD:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold).
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
LMODE button page 8
To select the radio band (FM/AM)*.
MBTM/CAT button (CDX-GT320/GT32W) page 8
To start the BTM function (press and hold).
BTM button (CDX-GT220/GT22W/ GT120) page 8
To start the BTM function (press and hold).
NRESET button (located behind the front panel) (CDX-GT320/GT32W only) page 5
ONumber buttons
CD:
(1)/(2): ALBUM –/+ (during MP3/WMA playback) (CDX-GT320/GT32W/GT220/
GT22W)
To skip albums (press); skip albums continuously (press and hold).
(3): REP page 8
(4): SHUF page 8
(6): PAUSE
To pause playback of a CD on this unit. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
PReceptor for the card remote commander (CDX-GT320/GT32W/ GT220/GT22W only)
The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 5) (CDX-GT320/GT32W only).
qj < (.)/, (>) buttons
To control CD/radio, the same as (SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
qk DSPL (display) button
To change display items.
ql VOL (volume) +/– button
To adjust volume.
w; ATT (attenuate) button
To attenuate the sound. To cancel, press again.
wa SEL (select) button
The same as the select button on the unit.
ws M (+)/m (–) buttons
To control CD, the same as (1)/(2) (ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
wd SCRL (scroll) button
To scroll the display item.
wf Number buttons
To receive stored stations (press); store stations (press and hold).
*In the case of a CD/MD changer, HD radio tuner or SAT tuner being connected; when (SOURCE) is pressed, the connected device (“MD,” “HD,” “XM” or “SR”) will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, HD radio tuner band or SAT tuner band (CDX-GT320/GT32W only).
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
7
CD
For details on selecting a CD/MD changer, see page 10 (CDX-GT320/GT32W only).
Display items
Example: CDX-GT320
A Source (CDX-GT320/GT32W only)
BTrack number/Elapsed playing time, Disc/ artist name, Album number*1, Album name, Track name, Text information*2, Clock
*1 Album number is displayed only when the album is changed.
(CDX-GT320/GT32W/GT220/GT22W only)
*2 When playing an MP3, ID3 tag is displayed, and when playing a WMA, WMA tag is displayed. (CDX-GT320/GT32W/GT220/GT22W only)
To change display items B, press (DSPL).
Tip
Displayed items may differ depending on model, disc type, recording format and settings. For details on MP3/WMA, see page 13. (CDX-GT320/GT32W/GT220/GT22W only)
Repeat and shuffle play
1During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the desired setting appears.
Select |
To play |
TRACK |
track repeatedly. |
|
|
ALBUM* |
album repeatedly. |
|
|
SHUF ALBUM* |
album in random order. |
|
|
SHUF DISC |
disc in random order. |
|
|
*When an MP3/WMA is played. (CDX-GT320/GT32W/GT220/GT22W only)
To return to normal play mode, select “
OFF” or “SHUF OFF.”
Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1Press (SOURCE) repeatedly until
“TUNER” appears.
To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2.
2Press and hold (BTM) until “BTM” flashes.
The unit stores stations in order of frequency on the number buttons.
A beep sounds when the setting is stored.
Storing manually
1While receiving the station that you want to store, press and hold a number button ((1) to (6)) until
“MEM” or “MEMORY” appears.
Note
If you try to store another station on the same number button, the previously stored station will be replaced.
Receiving the stored stations
1Select the band, then press a number button ((1) to (6)).
Tuning automatically
1Select the band, then press (SEEK) –/+ to search for the station.
Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.
Tip
If you know the frequency of the station you want to listen to, press and hold (SEEK) –/+ to locate the approximate frequency, then press (SEEK) –/+ repeatedly to fine adjust to the desired frequency (manual tuning).
8
Other functions
Changing the sound settings
Adjusting the sound characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer volume.
1Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW*1 t MID*1 t HI*1 t
BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*2 t AUX*3
*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB” (page 9). “ATT” is displayed at the lowest setting, and can be adjusted up to 21 steps.
*3 When AUX source is activated (page 10).
2Rotate the volume control dial to adjust the selected item.
After 3 seconds, the setting is complete and the display returns to normal play/reception mode.
Customizing the equalizer curve
— EQ3
“CUSTOM” of EQ3 allows you to make your own equalizer settings.
1Select a source, then press (EQ3) repeatedly to select “CUSTOM.”
2Press the select button repeatedly until “LOW,” “MID” or “HI” appears.
3Rotate the volume control dial to adjust the selected item.
The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.
Example: CDX-GT320/GT32W
Repeat steps 2 and 3 to adjust the equalizer curve.
To restore the factory-set equalizer curve, press and hold the select button before the setting is complete.
After 3 seconds, the setting is complete and the display returns to normal play/reception mode.
Tip
Other equalizer types are also adjustable.
Adjusting setup items — SET
1Press and hold the select button.
The setup display appears.
2Press the select button repeatedly until the desired item appears.
3Rotate the volume control dial to select the setting (example “ON” or “OFF”).
4Press and hold the select button.
The setup is complete and the display returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source and setting.
The following items can be set (follow the page reference for details):
“z” indicates the default settings.
CLOCK-ADJ (Clock Adjust) (page 5)
BEEP
To set “BEEP-ON” (z) or “BEEP-OFF.”
AUX-A*1 (AUX Audio)
To turn the AUX source display “AUX-A-ON” (z) or “AUX-A-OFF” (page 10).
A.OFF (Auto Off)
To shut off automatically after a desired time when the unit is turned off,
–“A.OFF-NO” (z), “A.OFF-30S (Seconds),” “A.OFF-30M (Minutes)” or “A.OFF-60M (Minutes).”
SUB/REAR*1
To switch the audio output.
–“SUB-OUT” (z): to output to a subwoofer.
–“REAR-OUT”: to output to a power amplifier.
DEMO (Demonstration)
To set “DEMO-ON” (z) or “DEMO-OFF.”
DIM (Dimmer)
To change the brightness of the display.
–“DIM-ON”: to dim the display.
–“DIM-OFF” (z): to deactivate the dimmer.
M.DSPL (Motion Display)
To select the Motion Display mode.
CDX-GT320/GT32W
–“M.DSPL-SA” (z): to show moving patterns and spectrum analyzer.
–“M.DSPL-OFF”: to deactivate the Motion Display.
CDX-GT220/GT22W/GT120
–“M.DSPL-ON” (z): to show moving patterns.
–“M.DSPL-OFF”: to deactivate Motion Display.
continue to next page t
9
A.SCRL (Auto Scroll)
To scroll long displayed item automatically when the disc/album/track is changed.
–“A.SCRL-ON” (z): to scroll.
–“A.SCRL-OFF”: to not scroll.
LOCAL (Local Seek Mode)
–“LOCAL-ON” : to only tune into stations with stronger signals.
–“LOCAL-OFF” (z): to tune normal reception.
MONO*2 (Monaural Mode)
To improve poor FM reception, select monaural reception mode.
–“MONO-ON” : to hear stereo broadcast in monaural.
–“MONO-OFF” (z): to hear stereo broadcast in stereo.
LPF*3 (Low Pass Filter)
To select the subwoofer cut-off frequency: “LPF OFF” (z), “LPF125Hz” or “LPF 78Hz.”
LOUD (Loudness)
To allow you to listen clearly at low volume levels.
–“LOUD-ON” : to reinforce bass and treble.
–“LOUD-OFF” (z): to not reinforce bass and treble.
BTM (page 8)
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set to “SUB.”
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:
Connecting the portable audio device
1Turn off the portable audio device.
2Turn down the volume on the unit.
3Connect to the unit.
AUX
AUX
Connecting cord*
(not supplied)
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected audio device before playback.
1Turn down the volume on the unit.
2Press (SOURCE) repeatedly until “FRONT IN” appears.
3Start playback of the portable audio device at a moderate volume.
4Set your usual listening volume on the unit.
5Press the select button repeatedly until “AUX” appears, and rotate the volume control dial to adjust the input level (–8 dB to +18 dB).
CD/MD changer (CDX-GT320/GT32W only)
Selecting the changer
1Press (SOURCE) repeatedly until “CD” or “MD” appears.
2Press (MODE) repeatedly until the desired changer appears.
Unit number Disc number
Playback starts.
10
Skipping albums and discs
1During playback, press (1)/(2) (ALBUM –/ +).
To skip |
Press (1)/(2) (ALBUM) |
album |
and release (hold for a |
|
moment). |
|
|
album |
within 2 seconds of first |
continuously |
releasing. |
|
|
discs |
repeatedly. |
|
|
discs |
then, press again within 2 |
continuously |
seconds and hold. |
|
|
Repeat and shuffle play
1During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears.
Select |
To play |
DISC |
disc repeatedly. |
|
|
SHUF |
tracks in the changer in random |
CHANGER |
order. |
|
|
SHUF ALL* |
tracks in all units in random |
|
order. |
|
|
*When one or more CD changers, or two or more MD changers are connected.
To return to normal play mode, select “ 
OFF” or “SHUF OFF.”
Tip
“SHUF ALL” will not shuffle tracks between CD units and MD changers.
Card remote commander RM-X114 (for CDX-GT220/GT22W)
The corresponding buttons on the card remote commander control the same functions as those on this unit.
DSPL |
DSPL |
|
MENU* |
|
PRESET + |
SOURCE |
MENU |
DISC + |
|
|
|
</, |
SEEK– |
SOURCE |
|
||
(SEEK –/+) |
SOUND |
DISC – |
|
||
SOUND |
|
PRESET – |
OFF |
OFF |
+ |
|
|
VOL |
VOL (+/–) |
|
– |
|
|
MODE
LIST |
|
SEEK+ |
|
|
R |
TE |
|
EN |
|
ATT
MODE
LIST*
m/M
(DISC*/
PRESET +/–)
ENTER*
ATT
The following buttons on the card remote commander have also different buttons/functions from the unit.
•DSPL (display) button
To change display items.
•</, (SEEK –/+) buttons
To control CD/radio, the same as (SEEK) –/+ on the unit.
•SOUND button
The same as the select button on the unit.
•M/m (DISC*/PRESET +/–) buttons
To control CD, the same as (1)/(2) (ALBUM –/+) buttons on the unit.
•ATT (attenuate) button
To attenuate the sound. To cancel, press again.
* Not available for this unit.
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
11
Loading...