Pioneer AVIC-F9310BT User Manual [en, de, es, fr, it]

Upgrade Instructions and Operation Manual Addendum Instructions de mise à jour et Addenda au manuel de fonctionnement

2013 NAVIGATION UPGRADE microSDHC-CARD Carte microSDHC de mise à jour 2013 microSDHC di aggiornamento mappa 2013

TARJETA microSDHC DE ACTUALIZACIÓN DE NAVEGACIÓN DE 2013

2013 microSDHC-KARTE FÜR NAVIGATIONS-UPGRADE

2013 NAVIGATIE UPGRADE microSDHC-KAART

T1000-20496

This software upgrade will result in changes to certain features and availability of information. While the changes are intended to improve the overall user experience for most users, Pioneer and its licensors disclaim any warranty or liability for damages in connection with such changes.

Cette mise à jour logicielle modifiera l’accès à certaines fonctions et à certaines informations. Si ces changements sont destinés à améliorer le confort d’utilisation de la plupart des consommateurs, Pioneer et ses partenaires déclinent toute responsabilité pour tout préjudice lié à ces modifications.

Questo software d’aggiornamento modifica certe funzioni e le modalità d’esposizione o di reperimento di certe informazioni. Nell’assicurare che tali modifiche sono intese a migliorare il piacere d’uso per la maggior parte degli utenti, Pioneer ed i suoi licenziatari declinano qualsiasi responsabilità per eventuali danni connessi a tali cambiamenti.

Esta actualización de software dará lugar a cambios en ciertas características y la disponibilidad de la información. Mientras que los cambios están destinados a mejorar la experiencia general del usuario para la mayoría de los usuarios, Pioneer y sus otorgantes de licencias, declinamos toda responsabilidad por daños y perjuicios en relación con dichos cambios.

Dieses Software-Upgrade führt zu Änderungen in der Funktionalität und der Verfügbarkeit von Informationen. Diese Änderungen werden für die meisten Nutzer eine Verbesserung darstellen. Pioneer und seine Lizenzgeber lehnen jegliche Gewährleistung oder Haftung für Schäden im Zusammenhang mit diesen Änderungen ab.

Deze software upgrade bevat niet enkel een update voor de kaart maar ook nieuwe functionaliteit die bepaalde informatie op een andere manier weergeeft. Daar deze aanpassingen bedoeld zijn om het gebruik te verbeteren voor de meeste gebruikers, wijzen Pioneer en haar licentieverstrekkers elke garantie of aansprakelijkheid voor schade in verband met deze wijzigingen af.

Nederlands Deutsch Español Italiano Français English

2 Engb

English

Engb 3

4 Engb

English

Engb 5

6 Engb

English

Engb 7

8 Engb

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly.

Important

The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.

Licence agreement

PIONEER SOFTWARE LICENCE

AGREEMENT 10

About the database

About the data for the map database 12

Important Information for the User

Information on compatibility with iPhone with Lightning connector 13

Precaution

Models to be upgraded 14

Manual overview	14
Conventions used in this manual 14
“microSD card”	14
In case of trouble	15
Visit our website	15
Copyright 15

Changing to the NAVTEQ map database 15

Functions enabled or disabled by upgrade

Setting items to be deleted and initialised by upgrade 18

Instructions for upgrading

The navigation system upgrade process 19 Preparation for upgrade 19

–	Checking the device number 19
–	Getting the password for
	authentication	19
Upgrade procedures		20

– Upgrading the software programme and the map database 20

– Checking whether the upgrade was done properly 21

–Updating the Bluetooth wireless technology software 21

Using the rear view camera functions

Setting guidelines on the rear view image 23

Troubleshooting

Problems in the procedures for updating 25 Messages in the procedures for

updating 25

English

Engb 9

Chapter
01		Licence agreement
	PIONEER		publish, sell, assign, lease, sublicence, market
	SOFTWARE LICENCE		or otherwise transfer the Software or use it in
			any manner not expressly authorised by this
	AGREEMENT
			agreement. You shall not derive or attempt to
	THIS IS A LEGAL AGREEMENT BETWEEN		derive the source code or structure of all or
			any portion of the Software by reverse engi-
	YOU, AS THE END USER, AND PIONEER
			neering, disassembly, decompilation, or any
	CORP. (JAPAN) (“PIONEER”). PLEASE READ
			other means. You shall not use the Software to
	THE TERMS AND CONDITIONS OF THIS
			operate a service bureau or for any other use
	AGREEMENT CAREFULLY BEFORE USING
			involving the processing of data for other per-
	THE SOFTWARE INCLUDED IN THIS PRO-
			sons or entities.
	DUCT. BY USING THE SOFTWARE, YOU
			Pioneer and its licensor(s) shall retain all copy-
	AGREE TO BE BOUND BY THE TERMS OF
			right, trade secret, patent and other proprie-
	THIS AGREEMENT. THE SOFTWARE IN-
			tary ownership rights in the Software. The
	CLUDES A DATABASE LICENCED BY THIRD
			Software is copyrighted and may not be cop-
	PARTY SUPPLIER(S) (“SUPPLIERS”), AND
			ied, even if modified or merged with other pro-
	YOUR USE OF THE DATABASE IS COVERED
			ducts. You shall not alter or remove any
	BY THE SUPPLIERS’ SEPARATE TERMS IN A
			copyright notice or proprietary legend con-
	DOCUMENT INCLUDED IN THIS PRODUCT. IF
			tained in or on the Software.
	YOU DO NOT AGREE WITH ALL OF THESE
	TERMS, PLEASE RETURN THE PRODUCT (IN-		2 DISCLAIMER OF WARRANTY
	CLUDING THE SOFTWARE, AND ANY WRIT-
			The Software and related documentation are
	TEN MATERIALS) WITHIN FIVE (5) DAYS OF
			provided to you “AS IS”. PIONEER AND ITS LI-
	RECEIPT OF THE PRODUCT, TO THE STORE
			CENSOR(S) (for the purpose of provisions 2
	YOU PURCHASED IT FROM.
			and 3, Pioneer and its licensor(s) shall be col-
	FOR THE PRODUCT PURCHASED DIRECTLY
			lectively referred to as “Pioneer”) MAKES AND
	FROM NAVTEQ MAPS, PLEASE CONTACT
			YOU RECEIVE NO WARRANTY, WHETHER EX-
	THE APPROPRIATE NAVTEQ MAPS CONTACT
			PRESS OR IMPLIED, AND ALL WARRANTIES
	CENTER TO REQUEST A RETURN AUTHORI-
			OF MERCHANTABILITY AND FITNESS FOR
	ZATION WITHIN THIRTY (30) DAYS OF PUR-
			ANY PARTICULAR PURPOSE ARE EX-
	CHASE. NAVTEQ MAPS WILL PROVIDE YOU
			PRESSLY EXCLUDED. SOME COUNTRIES DO
	INSTRUCTIONS ON WHAT NEEDS TO BE RE-
			NOT ALLOW EXCLUSION OF IMPLIED WAR-
	TURNED AND WHERE IT IS TO BE RE-
			RANTIES, SO THE ABOVE EXCLUSION MAY
	TURNED.
			NOT APPLY TO YOU. The Software is complex
	USE OF THE SOFTWARE SHALL BE DEEMED
			and may contain some nonconformities, de-
	TO BE YOUR CONSENT TO THE LICENCE
			fects or errors. Pioneer does not warrant that
	AGREEMENT.
			the Software will meet your needs or expecta-
1		GRANT OF LICENCE	tions, that operation of the Software will be

	Pioneer grants to you a non-transferable, non-	error free or uninterrupted, or that all noncon-
		formities can or will be corrected. Further-
	exclusive licence to use the software included
		more, Pioneer does not make any
	in this product (the “Software”) and the related
		representations or warranties regarding the
	documentation solely for your own personal
		use or results of the use of the Software in
	use or for internal use by your business for the
		terms of its accuracy, reliability or otherwise.
	Pioneer products.
	You shall not copy, reverse engineer, translate,
	port, modify or make derivative works of the
	Software. You shall not loan, rent, disclose,

10 Engb

	Chapter
Licence agreement	01

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING, WITHOUT LIMITATION, COMPENSATORY, INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST PROFITS, LOST SALES OR BUSINESS, EXPENDITURES, INVESTMENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF ANY GOODWILL, OR DAMAGES) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF PIONEER HAS BEEN INFORMED OF, KNEW OF, OR SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION IN THE AGGREGATE, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION, AND OTHER TORTS. IF PIONEER’S WARRANTY DISCLAIMER OR LIMITATION OF LIABILITY SET FORTH IN THIS AGREEMENT SHALL OR FOR ANY REASON WHATSOEVER BE HELD UNENFORCEABLE OR INAPPLICABLE, YOU AGREE THAT PIONEER’S LIABILITY SHALL NOT EXCEED FIFTY PERCENT (50 %) OF THE PRICE PAID BY YOU FOR THIS PRODUCT.

Some countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty disclaimer and limitation of liability shall not be applicable to the extent that any provision of this warranty is prohibited by any country or local law which cannot be pre-empted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software nor any other technical data received from Pioneer, nor the direct product thereof, will be exported outside the country or district (the “Country”) governed by the government having jurisdiction over you (the “Government”) except as authorised and as permitted by the laws and regulations of the Government. If the

Software has been rightfully obtained by you outside of the Country, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of the Government and the laws and regulations of the jurisdiction in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated. You may terminate it at any time by destroying the Software. The Agreement also will terminate if you do not comply with any terms or conditions of this Agreement. Upon such termination, you agree to destroy the Software.

6 MISCELLANEOUS

This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions of this Agreement shall remain in full force and effect. This Agreement is governed and construed by the laws of Japan. Any dispute, controversy, or difference which may arise between you and Pioneer, out of or in relation to or in connection with this Agreement will be submitted to arbitration in Tokyo, Japan, in accordance with the Commercial Arbitration Rules of the Japan Commercial Arbitration Association. The award of arbitration shall be final and binding.

English

Engb 11

Chapter
02		About the database
	About the data for the map				! Contains Royal Mail data ©Royal Mail
	database				!	copyright and database right 2010
						Copyright Geomatics Ltd.
	! Modifications related to roads, streets/high-				!	Copyright ©2003; Top-Map Ltd.
		ways, terrain, construction and other things			! La Banca Dati Italiana è stata prodotta
		before/during the development period may				usando quale riferimento anche cartografia
		not be reflected in this database. Inevitably,				numerica ed al tratto prodotta e fornita
		those modifications after that period are			!	dalla Regione Toscana.
		not reflected in this database.				Copyright ©2000; Norwegian Mapping
	! Regardless of existing and newly-built					Authority
		things, the data may be different from the			! Source: IgeoE – Portugal
		actual condition.			! Información geográfica propiedad del
	! For details about the map coverage of this					CNIG
		navigation system, refer to the information			! Based upon electronic data ©National
		on our website.				Land Survey Sweden.
	! It is strictly prohibited to reproduce and use				! Topografische Grundlage: ©Bundesamt für
		any part or the whole of this map in any				Landestopographie
		form without permission from the copyright			! © 2013 INCREMENT P CORP. ALL RIGHTS
		owner.				RESERVED.
	! If the local traffic regulations or conditions
		deviate from this data, follow the local traf-
		fic regulations (such as signs, indications,
		etc.) and conditions (such as construction,
		weather, etc.).
	! The traffic regulation data used in the map
		database applies only to standard sized
		passenger vehicles. Note that regulations
		for larger vehicles, motorbikes, and other
		non-standard vehicles are not included in
!		the database.
		© 1993-2012 NAVTEQ. All rights reserved.

NAVTEQ Maps is a trademark of NAVTEQ.

!©Bundesamt für Eichund Vermessungswesen

!©EuroGeographics

!source: ©IGN 2009 – BD TOPO®

!Die Grundlagendaten wurden mit Genehmigung der zuständigen Behörden entnommen

12 Engb

	Chapter
Important Information for the User	03

NEVER stop the engine of your vehicle or turn off the power supply to the navigation system until the installation is completed. Turning the power off during upgrade process causes a malfunction or failure of the navigation system.

Information on compatibility with iPhone with Lightning connector

pThe following descriptions apply to the following models.

AVIC-F40BT, AVIC-F940BT, AVIC-F840BT, AVIC-F8430BT

pIn this manual, iPhone 5 and iPod touch (5th generation) will be referred to as

“iPhone with Lightning connector”.

pNote that this product does not contain “Firmware update for iPhone 5 / iPod touch

(5th generation) AppRadio Mode compatibility”.

p“Firmware update for iPhone 5 / iPod touch (5th generation) AppRadio Mode compatibility” will be available in August 2013 as a

free download from the website.

To use iPhone with Lightning connector, be sure to apply the update in addition to completing the software upgrade with this product.

See the following website to download “Firmware update for iPhone 5 / iPod touch (5th generation) AppRadio Mode compatibility” dedicated to this product. http://www.navigation.com/pioneer/eu/

=For your reference to update, see update instruction manual on the website.

pThe update is only allowed for the following models.

AVIC-F40BT, AVIC-F940BT, AVIC-F840BT,

AVIC-F8430BT

pThe following cables are required for connection to this navigation system.

!VGA/USB interface cable for iPod / iPhone (CD-IV202NAVI) (sold separately)

!Lightning to VGA Adapter (Apple Inc. products) (sold separately)

!Lightning to USB cable (CD-IU52) (sold separately) or Lightning to USB cable (supplied with iPhone with Lightning connector)

Notes:

!If you have already applied the update using “Firmware update for iPhone 5 / iPod touch (5th generation) AppRadio Mode compatibility” and then you complete the software upgrade with this product, the AppRadio Mode (previously known as Advanced App Mode) and Aha Radio functions will be disabled. In this case, go to the website and reapply the update by downloading “Firmware update for iPhone 5 / iPod touch (5th generation) AppRadio Mode compatibility” dedicated to this product.

!Be sure to complete the software upgrade with this product, and then apply the update by downloading “Firmware update for iPhone 5 / iPod touch (5th generation) AppRadio Mode compatibility” dedicated to this product, otherwise problems may occur.

!iPod source is unavailable when an iPhone with Lightning connector is connected to this navigation system.

!If you use only the hands-free function of iPhone 5, there is no need to apply the update by downloading “Firmware update for iPhone

5 / iPod touch (5th generation) AppRadio Mode compatibility”.

English

Engb 13

Chapter

04 Precaution

	! Read the entire manual before upgrading		Conventions used in this
		the programme of your navigation system.	manual
	! This package is unique, and cannot be in-		Before moving on, take a few minutes to read
		stalled on more than one unit.
			the following information about the conven-
	! Web-connected computer is required for
			tions used in this manual. Familiarity with
		online issuance of password.
			these conventions will help you greatly as you
			learn how to use your new equipment.
	Models to be upgraded		!	Buttons on your navigation system are de-
				scribed in ALL CAPITALS, BOLD letter-
	This product can upgrade the software pro-			ing:
				e.g.)
	gramme and database of the following mod-
				Press the MODE button or the HOME but-
	els:
				ton.
	!	AVIC-F30BT	!
				Menu items, screen titles, and functional
	!	AVIC-F930BT
				components are described in bold with
	!	AVIC-F9310BT
				double quotation marks “ ”:
	!	AVIC-F40BT
				e.g.)
	!	AVIC-F940BT
				The “System Settings” screen appears.
	!	AVIC-F840BT	!
				Touch panel keys that are available on the
	!	AVIC-F8430BT
				screen are described in bold in brackets [ ]:
	!	T1000-19329
				e.g.)
	p In this manual, T1000-19329 indicates the
				Touch [Settings].
		navigation system that is upgraded using	!
				Extra information, alternatives and other
		the software upgrade T1000-19329.
				notes are presented in the following for-
				mat:
	Manual overview			e.g.)
				p If the home location has not been stored
	This manual describes how to get the pass-
			!	yet, set the location first.
	word and activate the upgrade. It also provides			Functions of other keys on the same screen
	an overview of how functions change after the			are indicated with # at the beginning of the
	upgrade.			description:
	p The screen examples shown in this manual			e.g.)
		are based on the upgraded version of AVIC-	!	# If you touch [OK], the entry is deleted.
		F30BT using this product. The screens may		References are indicated like this:
		vary according to the models.		e.g.)
				= For details of the operation, refer to
	By upgrading AVIC-F30BT with this product,			Checking the device number on page
				19.
	functions and operations will be equivalent to
	AVIC-F40BT. Therefore, obtain Operation Man-
	ual for AVIC-F40BT and use it as your primary		“microSD card”
	reference.
			The microSD card and microSDHC card are
	By upgrading AVIC-F930BT or AVIC-F9310BT
	with this product, functions and operations		collectively referred to as the “microSD card”.
	will be equivalent to AVIC-F940BT. Therefore,		p Keep the microSD card out of the reach of
	obtain Operation Manual for AVIC-F940BT and			small children to prevent them from acci-
	use it as your primary reference.			dentally swallowing it.
		http://www.pioneer.eu	p Do not store the microSD card in high tem-
				peratures or direct sunlight.

14 Engb

Precaution

	p Do not subject the microSD card to shock	Copyright
	or impact.
	p Do not allow the microSD card to come	The names of private corporations, pro-
	into contact with liquids. Damage to the
		ducts and other entities described in this
	microSD card and your products could re-
		product are the registered trademarks or
	sult from contact with liquids.
		trademarks of their respective firms.
	p Be careful not to touch terminals on the
		= For more information, refer to the Operation
	microSD card. Doing so may cause con-
		Manual of your navigation system.
	nection failures. If any terminals are dirty,
	wipe them with a clean dry cloth.

Chapter

04

English

pmicroSDHC Logo is a trademark of SD-3C, LLC.

In case of trouble

!Should the navigation system fail to operate properly, contact your dealer or nearest authorised Pioneer Service Station.

!Do not lose the Media Number Card (MEDIA NUMBER CARD) printed on the inside of the packaging of this product. If the Media Number Card is lost, reissue of the Media Number (MEDIA NUMBER) is not possible. Also you must submit the Media Number Card when repairs are needed. The card is necessary as proof of authenti-

city if service is required (including recovery).

Changing to the NAVTEQ map database

pThe following descriptions are for users upgrading AVIC-F30BT, AVIC-F930BT, or AVICF9310BT for the first time.

!The map design will be changed by upgrading.

!The display of roads, street names, the background texture of the map, and POI categories will change depending on lo-

cations or the map scale after upgrading.

Visit our website

Visit us at the following site: http://www.pioneer.eu

!Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.

!We offer the latest information about

PIONEER CORPORATION on our website.

Engb 15

Chapter

05 Functions enabled or disabled by upgrade

If you upgrade your navigation system using this product, the system will have the following changes.

Grouping:

1:AVIC-F30BT, AVIC-F930BTor AVIC-F9310BT

2:AVIC-F40BT, AVIC-F940BT, AVIC-F840BTor T1000-19329

p On AVIC-F8430BT, only the map database is updated.

1: Functions and operations changed by upgrade

	Navigation func-	Summary of changes	Grouping
	tions		1	2
		You can search the cities from the history that you have searched by
		entering the name with the keyboard and selected by “Address”,	1	—
		“POI” or “Favourites”.
	Destination	Facility’s address will appear on the “POI List” screen.	1	—
		If you touch [OK] without entering the house number, a representa-	1	—
		tive location on the road in the selected city appears.
		You can sort search results of POI names by degree of consistency	1	—
		with the entered text.
		You can switch the order of names (first/last name) in the phone	1	—
	Bluetooth Settings	book.
		The Bluetooth firmware version will be updated.	1	1
		Guidelines are displayed on the rear view image.
	Rear view camera	p The positioning of guidelines can be adjusted.	1	1
		= For details of the operation, refer to Using the rear view cam-
		era functions on page 23.
		After you start using this navigation system, a message related to	1	—
		map data may be displayed.
		If you do not operate this navigation system for two minutes, demon-	1	—
		stration images are displayed.
	Other functions
		“Find the nearest <POI category>” and “Find an address” on the	1	—
		voice operation screen will no longer appear (for AVIC-F30BT).
		The languages of TTS files stored in your navigation system will be	1	1
		changed (*1).

(*1) If the desired language is not available in your navigation system, install TTS files from the CD-ROM provided with this product. For details of the operation, refer to the activation manual in the supplied CD-ROM.

16 Engb

Functions enabled or disabled by upgrade

	AV functions	Summary of changes	Grouping
			1	2
		Your navigation system can be switched to AppRadio Mode (pre-
		viously known as Advanced App Mode), allowing you to display
		and operate iPod applications on the screen.
		In AppRadio Mode (previously known as Advanced App Mode),	1	—
	iPod	you can operate applications through the navigation system using
		finger gestures, such as tapping, dragging, scrolling or flicking the
		screen.
		The keyboard language preference for iPhone application screens	1	—
		can be set on the iPod function menu screen.
		By connecting a smartphone that has installed Aha Radio, you can
	Aha Radio	control, view and hear Aha Radio from your navigation system.	1	—
		p Before connecting an Android™ device, update the Bluetooth
		firmware version to 3.32.
	AV Settings	[App Connection] used for Aha Radio connection setting will be	1	—
		added.
	Other functions	[AV Source] on the “Top Menu” screen will be changed to [AV	1	—
		Source & Contents].

Chapter

05

English

Engb 17

Chapter

05 Functions enabled or disabled by upgrade

Setting items to be deleted and initialised by upgrade

The following data and settings will be cleared and reset to default values. Other items will be retained. However, some items are not listed because the setting can be easily recovered by users, such as the last cursor position on the map screen.

Bold indicates functions or command names.

Setting Items

	Top Menu	Shortcut Menu
		Current route
	Route setting	Guidance state of the current route
		Route Options
		Learning route data
	Destination	“Favourites” list sort order
	Traffic Settings	Displayed Traffic Info
		Displayed Info
		Quick Access Selection
	Map Settings	Overlay POI
		Day/Night Display
		AV Guide Mode
		Road Colour
		Drive Log Settings
	Navi Settings	Demo Mode
		Eco Settings
	System Set-	Regional Settings
	tings	Volume
	Bluetooth Set-	Auto Answer Preference
	tings	Refuse All Calls
	Others	Keyboard layout

The user data stored in the internal memory of the unit may be erased if an unexpected error occurs during software installation. Pioneer is not responsible for any data loss or unavailability of user data.

18 Engb

Chapter

Instructions for upgrading

The navigation system	Preparation for upgrade
upgrade process	Checking the device number

1Check the device number of your navigation system.

=For details of the operation, refer to

Checking the device number on page 19.

j

2Get the password for authentication.

=For details, refer to Getting the password for authentication on page 19.

j

3Upgrade the software programme of your navigation system.

=For details of the operation, refer to Upgrading the software programme and the map database on page 20.

j

4Check whether the upgrade was done properly.

=For details of the operation, refer to

Checking whether the upgrade was done properly on page 21.

j

5Update the Bluetooth firmware.

=For details of the operation, refer to Updating the Bluetooth wireless technology software on page 21.

First, check your device number (DEVICE NUMBER, displayed such as

Device # or Device Number) of your navigation system for later procedures. To display the device number, do the following.

1Press the HOME button to display the “Top Menu” screen.

2Touch [Settings].

The “Settings Menu” screen appears.

3 Touch [System Settings].

The “System Settings” screen appears.

4 Touch [Service Information].

The “Service Information Screen” screen appears.

5 Write down your device number (Device Number) onto the supplied Media Number Card (MEDIA NUMBER CARD) to avoid mistakes.

pAlso write down “Version” information which would be used to confirm completion of the update.

Getting the password for authentication

For upgrade, a unique password issued online is necessary. Access the website with your computer and get your password.

The following information is required.

!Media Number (MEDIA NUMBER) shown on the Media Number Card

(MEDIA NUMBER CARD) printed on the inside of the packaging of this product

!Device Number (DEVICE NUMBER) of your navigation system

1 Access on the following website to issue your password. http://www.pioneer.eu/UnlockNavgate

06

English

Engb 19

Chapter

06 Instructions for upgrading

For issuing the password, follow the instruction on the website.

2 Record the password that you received.

You need to input this password accurately. Write down your password to avoid mistakes.

2 Insert the upgrade microSD card into the SD card adapter (for AVIC-F30BT and AVIC-F40BT).

Upgrade procedures

!NEVER stop the engine of your vehicle or turn off the power supply to the navigation system until the installation is completed. Turning the power off during upgrade process causes a malfunction or failure of the navigation system.

!No functions are available during upgrade process.

!To use iPhone with Lightning connector, first go to the website and download “Firmware update for iPhone 5 / iPod touch (5th generation) AppRadio Mode compatibility”. Next, be sure to upgrade the software programme and the map database with this product and then apply the update with “Firmware update for iPhone 5 / iPod touch (5th generation) AppRadio Mode compatibility”.

=For details, refer to Information on compatibility with iPhone with Lightning connector on page 13.

Upgrading the software programme and the map database

This section describes the upgrade procedures for your navigation system.

pThe upgrade takes approximately 30 minutes in total.

1 Park your vehicle in a safe place and apply the handbrake.

3Insert the upgrade microSD card into the SD card slot.

The message confirming whether or not to start the update will appear.

4Touch [Yes].

The message confirming whether or not to enter the password will appear.

5 Touch [Yes].

After a short pause, the keyboard for entering the password will appear.

#If you touch [No], the device number (Device #) of your navigation system will appear.

#If you touch [Cancel], the update will be cancelled.

20 Engb

	Chapter
Instructions for upgrading	06

6 Enter the password for authentication that you obtained, then touch [OK].

A message confirming whether to restart the navigation system appears.

7 Touch [OK].

The navigation system restarts and then the installation begins.

1Press the HOME button to display the “Top Menu” screen.

2Touch [Settings].

The “Settings Menu” screen appears.

3 Touch [System Settings].

The “System Settings” screen appears.

4 Touch [Service Information].

The “Service Information Screen” screen appears.

5Check the version information.

6Eject the upgrade microSD card.

English

8 Wait until the upgrade process is complete.

After the installation is complete, the navigation system restarts.

Checking whether the upgrade was done properly

Display “Service Information Screen” screen to compare the current version number with the previous one.

Updating the Bluetooth wireless technology software

Access the Pioneer website to check your phone’s compatibility. If your phone is on the list and you wish to update, manually update the Bluetooth firmware after the automatic upgrade is finished.

http://www.pioneer.eu

CAUTION

!Be sure to upgrade your navigation system first.

!Be careful to follow the update procedure correctly. If you make a mistake, Bluetooth wireless technology functions will become unavailable.

p Consult your authorised dealer if you are unable to use Bluetooth wireless technology functions.

!Be sure to complete the Bluetooth firmware update procedure without interruption.

pRegistered phones that are listed on the “Connection List” screen are cleared by the software update.

Engb 21

Chapter

06 Instructions for upgrading

1 Insert the upgrade microSD card into the SD card adapter (for AVIC-F30BT and AVIC-F40BT).

2Insert the upgrade microSD card into the SD card slot.

3Press the HOME button to display the “Top Menu” screen.

4Touch [Settings].

The “Settings Menu” screen appears.

5 Touch [Bluetooth Settings].

The “Bluetooth Settings” screen appears.

6Touch [Firmware update].

The current version is displayed.

7Confirm the Bluetooth firmware version.

Make sure that the current version is 3.22 or later.

9 Make sure that the current Bluetooth firmware version is 3.22 or later and the new Bluetooth firmware version is 3.32.

10Touch [Yes].

Update starts.

11Wait until the upgrade process is complete.

A message will appear after the update is complete.

12Touch [OK].

The message disappears, and the map screen returns.

13 Eject the upgrade microSD card.

Update is completed.

8 If the current version is 3.22 or later, touch [Firmware update].

The message confirming whether or not to start the update will appear.

22 Engb

	Chapter
Using the rear view camera functions	07

pThe instructions in this section apply to every model except AVIC-F8430BT.

Setting guidelines on the rear view image

CAUTION

!When adjusting the guidelines, be sure to park the vehicle in a safe place and apply the handbrake.

!Before getting out of the car to place the markings, be sure to turn the ignition switch off (ACC OFF).

!The range projected by the rear view camera is limited. Also, the vehicle width and distance guidelines displayed on the rear view camera image may differ from the actual vehicle width and distance. (The guidelines are straight lines.)

!The image quality may deteriorate depending on the usage environment, such as at night or in dark surroundings.

1Park your vehicle in a safe place and apply the handbrake.

2Using packing tape or similar, place markings approximately 25 cm from each side of the vehicle, and approximately

50cm and 2 m from the rear bumper.

3 Put the gearstick in reverse and display the rear view camera screen.

4 Touch .

The screen for setting the guidelines appears.

#Each touch of turns the guidelines display on or off.

#Touching displays the “Parking Assist” screen.

p Because the Vehicle Bus adapter cannot connect to AVIC-F8430BT, this key is always inactive.

5 Touch

or

.

The screen for adjusting the points appears.

English

2 m

50 cm

25 cm

Markings

Markings

25 cm

Rear bumper

# If you touch [Clear], the display position of the guidelines returns to the factory settings.

6 Touch or to select a point.

Engb 23

Chapter

07 Using the rear view camera functions

7 Touch	,	,	or	to adjust
the position of the point.

pWhen a point is moved, the distance from the initial value is displayed at the top right of the screen.

8 Touch [OK].

The set value is saved and the rear view image appears.

#If you touch [Clear], the point returns to the preadjustment position.

#If you touch , the display returns to the setting screen for guidelines without reflecting the setting.

24 Engb

Appendix

Troubleshooting

Problems in the procedures for updating

			Symptom	Cause	Action
		The upgrade process doesn’t		An incorrect microSD card has	Eject the inserted microSD card and insert
	start and the navigation system			been inserted.	the correct upgrade microSD card.
	boots up as usual.
				Upgrade has been already done.	Check whether the upgrade was done prop-
					erly. If the upgrade has not been done yet,
					consult the nearest authorised service sta-
					tion.
				The screen that cannot begin the	Eject the upgrade microSD card, and display
				upgrade process is displayed.	the map of your current position, and then re-
					insert the upgrade microSD card.
	The navigation system does not			The engine of your vehicle was	Consult the nearest authorised service sta-
	work properly after upgrade.			stopped or the power supply to the	tion.
				navigation system was turned off
				during upgrade process.
				Upgrade microSD card was pulled	Consult the nearest authorised service sta-
				out during upgrade process.	tion.

English

Messages in the procedures for updating

The following messages may be displayed by your navigation system. Refer to the table to identify the problem, then take the suggested corrective action.

There are occasions when you may see error messages other than those shown here. In such cases, follow the instructions given on the display.

		Message	When	What to do
	An error occurred and the up-		Unexpected error occurred in the	Consult your local Pioneer dealer if this mes-
date failed.			update process.	sage persist.

Engb 25

26 Fr

Français

Fr 27

28 Fr

Français

Fr 29

30 Fr