Pioneer AVIC-U250 Owner's Manual

0 (0)

Owner’s Manual

ADD-ON NAVIGATION SYSTEM

AVIC-U250

For details on software updates, visit www.naviextras.com.

English

Contents

Thank you for buying this Pioneer product.

Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a

safe place for future reference.

Important

The screens shown in the examples may differ from actual screens, which may be changed without notice.

Precaution

The Safety of Your Ears is in Your Hands 5 ESTABLISH A SAFE LEVEL: 5 BE SURE TO OBSERVE THE FOLLOWING

GUIDELINES: 5

Introduction License agreement 6

– PIONEER AVIC-U250 - for U.S.A. 6 – PIONEER AVIC-U250 - for Canada 8 – END USER LICENSE AGREEMENT 10

About the data for the map database 12 Important safety information 12

– Fuel cost management 14 – Traffic information 14 – Speed limit indication 14

Additional safety information 14

– To avoid battery exhaustion 14 – Handling the SD card slot 14

Notes before using the system 14

– In case of trouble 14 – Visit our website 15

Checking part names and functions 15 Inserting an SD memory card 16 Resetting the microprocessor 16

Before you start

On first-time startup 17 Regular startup 18

How to use the navigation menu screens

Screen switching over view 19 What you can do on each menu 20

Operating list screens (e.g. route settings

screen) 20 Operating the on-screen keyboard 20 Monitoring the GPS reception quality 21

How to use the map

How to read the map screen 22 Frequently shown route events 23 Seeing the current position on the map 23

– Checking the detailed information

about the current position 24 Browsing the data field 25 Display during freeway driving 25 Operating the map screen 26

– Changing the scale of the map 26 – Smart Zoom 26 – Switching the map orientation 26 – Changing the view angle of the

map 27

– Switching the map between 2D and

3D 27

– Scrolling the map to the position you

want to see 28

– Viewing information about a specified

location 28

Searching for and selecting a location

Searching for a location by address 29 Searching for a location by entering the

midpoint of a street 30

Searching for a location by entering the city

center 30

Finding the location by specifying the ZIP

code 30

Searching for Points of Interest (POI) 31

– Searching for POIs using “Quick

Search” 31

– Searching for POIs using preset

categories 32 Searching for POIs by categories 32

Contents

Searching for a POI directly from the name of

the facilities 34 Searching for a nearby POI 35 Selecting a location by using “Find on

Map” 36 Selecting destination from “Favorites” 36 Selecting a location you searched for

recently 37

– Smart History 37 – History 37

Searching for a location by coordinates 37 Searching for a location by scrolling the

map 38

After the location is decided Setting a route to your destination 39

– Setting a route using a searched

location 39

– Checking route alternatives when

planning the route 39

– Setting a route using the “My Route”

menu 40

Checking and modifying the current route

Displaying the route overview 42 Checking route parameters and accessing

route related functions 42 Modifying the route calculation

conditions 42

– Changing the vehicle used 42 – Setting the vehicle parameters 43 – Setting the route calculation 44 – Changing road types used 45

Modifying the route 46

– Selecting a new destination when a

route is already set 46

– Setting a new starting position for the

route 46

Editing the list of destinations 47

Canceling the current route guidance 48 Checking route alternatives for the current

route 48 Watching the simulation of the route 49 Navigating in off-road mode 49

Registering and editing locations

Storing a location in “Favorites” 50 Saving a location as an alert point 50 Editing an alert point 51

Using traffic information

Checking historical traffic information 52 Receiving real-time traffic information

(TMC) 52

– Checking the traffic incidents on the

map 53

Customizing preferences

Displaying the settings screen 54 Setting the volume and the guidance voice

for navigation system 54 Customizing the quick menu 55 Setting the traffic information 56 Setting the user profiles 57 Customizing the map screen settings 57 Setting the visual guidance 58 Customizing the display settings 59 Customizing the regional settings 60 Setting the Trip Monitor 60 Starting the configuration wizard 60 Resetting to the default settings 61

Other operations More menu 62

Installation

Important safeguards 63 Precautions before connecting the

system 63 Before installing this product 64

Contents

To prevent damage 64 Precautions before installation 65 Connecting the system 66 Installing with the hook and loop

fastener 67

Appendix Positioning technology 68

– Positioning by GPS 68

Handling large errors 68

– When positioning by GPS is

impossible 68

– Conditions likely to cause noticeable

positioning errors 68

Route setting information 70

– Route search specifications 70 SD and SDHC logo 71 Display information 72 Glossary 73 Specifications 74

Precaution

Chapter

! This device complies with part 15 of the

FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

! Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna. — Increase the separation between the equip-

ment and receiver.

— Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/

TV technician for help.

WARNING

Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposi-

tion 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm. Wash hands

after handling.

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

! Set your volume control at a low setting. ! Slowly increase the sound until you can

hear it comfortably and clearly, without distortion.

! Once you have established a comfortable

sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

! Do not turn up the volume so high that you

can’t hear what’s around you.

! Use caution or temporarily discontinue use

in potentially hazardous situations.

! Do not use headphones while operating a

motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

Precaution

Chapter

Introduction

License agreement

PIONEER AVIC-U250 - for U.S.A.

THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. THE SOFTWARE INCLUDES A DATABASE LICENSED BY THIRD PARTY SUPPLIER(S) (“SUPPLIERS”), AND YOUR USE OF THE DATABASE IS COVERED BY THE SUPPLIERS’ SEPARATE TERMS, WHICH ARE ATTACHED TO THIS AGREEMENT (Refer to page 10). IF YOU DO NOT AGREE WITH ALL OF THESE TERMS, PLEASE RETURN THE PIONEER PRODUCTS (INCLUDING THE SOFTWARE, AND ANY WRITTEN MATERIALS) WITHIN FIVE (5) DAYS OF RECEIPT OF THE PRODUCTS, TO THE AUTHORIZED PIONEER DEALER FROM WHICH YOU PURCHASED THEM. USE OF THE SOFTWARE SHALL BE DEEMED TO BE YOUR CONSENT TO THE LICENSE AGREEMENT.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non exclusive license to use the software installed on the Pioneer products (the “Software”) and the related documentation solely for your own personal use or for internal use by your business, only on such Pioneer products. You shall not copy, reverse engineer, translate, port, modify or make derivative works of the Software. You shall not loan, rent, disclose, publish, sell, assign, lease, sublicense, market or otherwise transfer the Software or use it in any manner not expressly authorized by this agreement. You shall not derive or attempt to derive the source code or structure of all or any portion of the Software by reverse engineering, disassembly, decompilation, or any other means. You shall not use the Software to

operate a service bureau or for any other use involving the processing of data for other persons or entities. Pioneer and its licensor(s) shall retain all copyright, trade secret, patent and other proprietary ownership rights in the Software. The Software is copyrighted and may not be copied, even if modified or merged with other pro ducts. You shall not alter or remove any copyright notice or proprietary legend contained in or on the Software. You may transfer all of your license rights in the Software, the related documentation and a copy of this License Agreement to another party, provided that the party reads and agrees to accept the terms and conditions of this License Agreement.

2 DISCLAIMER OF WARRANTY

THE SOFTWARE AND RELATED DOCUMENTATION ARE PROVIDED TO YOU “AS IS”. PIONEER AND ITS LICENSOR(S) (FOR THE PURPOSE OF PROVISIONS 2 AND 3, PIONEER AND ITS LICENSOR(S) SHALL BE COLLECTIVELY REFERRED TO AS “PIONEER”) MAKES AND YOU RECEIVE NO WARRANTY FOR THE SOFTWARE, WHETHER EXPRESS OR IMPLIED, AND ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE FOR THE SOFTWARE ARE EXPRESSLY EXCLUDED. SOME STATES DO NOT ALLOW EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THE SOFTWARE IS COMPLEX AND MAY CONTAIN SOME NONCONFORMITIES, DEFECTS OR ERRORS. PIONEER DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR NEEDS OR EXPECTATIONS, THAT OPERATION OF THE SOFTWARE WILL BE ERROR FREE OR UNINTERRUPTED, OR THAT ALL NONCONFORMITIES CAN OR WILL BE CORRECTED. FURTHERMORE, PIONEER DOES NOT MAKE ANY REPRESENTATIONS OR WARRANTIES REGARDING THE USE OR RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS ACCURACY, RELIABILITY OR OTHERWISE.

Introduction

Chapter

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING, WITHOUT LIMITATION, COMPENSATORY, DIRECT, INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST PROFITS, LOST INCOME, LOST SALES OR BUSINESS, EXPENDITURES, INVESTMENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF ANY GOODWILL, OR DAMAGES) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF PIONEER HAS BEEN INFORMED OF, KNEW OF, OR SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES. THIS LIMITATION APPLIES TO ANY AND ALL CAUSES OF ACTION INDIVIDUALLY OR IN THE AGGREGATE, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION, AND OTHER TORTS. IF PIONEER’S WARRANTY DISCLAIMER OR LIMITATION OF LIABILITY SET FORTH IN THIS AGREEMENT SHALL OR FOR ANY REASON WHATSOEVER BE HELD UNENFORCEABLE OR INAPPLICABLE, YOU AGREE THAT PIONEER’S LIABILITY SHALL NOT EXCEED FIFTY PERCENT (50 %) OF THE PRICE PAID BY YOU FOR THE ENCLOSED PIONEER PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty disclaimer and limitation of liability shall not be applicable to the extent that they are prohibited by any applicable federal, state or local law which provides that such a disclaimer or limitation cannot be waived or preempted.

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software nor any other technical data received from Pioneer, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and

regulations of the United States. If the Software has been rightfully obtained by you outside of the United States, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of the United States and the laws and regulations of the jurisdiction in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated. You may terminate it at any time by destroying the Software. The Agreement also will terminate if you do not comply with any terms or conditions of this Agreement. Upon such termination, you agree to destroy the Software.

6 U.S. GOVERNMENT END USERS

If the Software is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, the Data is licensed with “Limited Rights”. Utilization of the Software is subject to the restrictions specified in the “Rights in Technical Data” clause at DFARS

252.227-7013, or the equivalent clause for nondefense agencies. Pioneer Electronics (USA) Inc., 1925 E. Dominguez Street, Long Beach, CA 90810.

7 MISCELLANEOUS

This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. Pioneer retailers do not have the authority to change this Agreement. This Agreement shall be governed by and construed in accordance with the internal laws of the State of California. If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions of this Agreement shall remain in full force and effect.

Introduction

Chapter

Introduction

PIONEER AVIC-U250 - for Canada

THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS OF CANADA, INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. THE SOFTWARE INCLUDES A DATABASE LICENSED BY THIRD PARTY SUPPLIER (S) (“SUPPLIERS”), AND YOUR USE OF THE DATABASE IS COVERED BY THE SUPPLIERS’ SEPARATE TERMS, WHICH ARE ATTACHED TO THIS AGREEMENT (Refer to page 10). IF YOU DO NOT AGREE WITH ALL OF THESE TERMS, PLEASE RETURN THE PIONEER PRODUCTS (INCLUDING THE SOFTWARE, AND ANY WRITTEN MATERIALS) WITHIN FIVE (5) DAYS OF RECEIPT OF THE PRODUCTS, TO THE AUTHORIZED PIONEER DEALER FROM WHICH YOU PURCHASED THEM. USE OF THE SOFTWARE SHALL BE DEEMED TO BE YOUR CONSENT TO THE LICENSE AGREEMENT.

1 GRANT OF LICENSE

Pioneer grants to you a non-transferable, non exclusive license to use the software installed on the Pioneer products (the “Software”) and the related documentation solely for your own personal use or for internal use by your business, only on such Pioneer products. You shall not copy, reverse engineer, translate, port, modify or make derivative works of the Software. You shall not loan, rent, disclose, publish, sell, assign, lease, sublicense, market or otherwise transfer the Software or use it in any manner not expressly authorized by this agreement. You shall not derive, or attempt to derive, the source code or structure of all or any portion of the Software by reverse engineering, disassembly, decompilation, or any other means. You shall not use the Software to

2 DISCLAIMER OF WARRANTY

Introduction

Chapter

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING, WITHOUT LIMITATION, COMPENSATORY, INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST PROFITS, LOST SALES OR BUSINESS, EXPENDITURES, INVESTMENTS, OR COMMITMENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF ANY GOODWILL, OR DAMAGES) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF PIONEER HAS BEEN INFORMED OF, KNEW OF, OR SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION IN THE AGGREGATE, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION, AND OTHER TORTS. IF PIONEER’S WARRANTY DISCLAIMER OR LIMITATION OF LIABILITY SET FORTH IN THIS AGREEMENT SHALL OR FOR ANY REASON WHATSOEVER BE HELD UNENFORCEABLE OR INAPPLICABLE, YOU AGREE THAT PIONEER’S LIABILITY SHALL NOT EXCEED FIFTY PERCENT (50 %) OF THE PRICE PAID BY YOU FOR THE ENCLOSED PIONEER PRODUCT. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty disclaimer and limitation of liability shall not be applicable to the extent that they are prohibited by any applicable federal, state or local law which provides that such a disclaimer or limitation cannot be waived or preempted.

obtained by you outside of Canada, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of Canada and the laws and regulations of the jurisdiction in which you obtained the Software.

5 TERMINATION

6 MISCELLANEOUS

This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. Pioneer retailers do not have the authority to change this Agreement. This Agreement shall be governed by and construed in accordance with the internal laws of the Province of Ontario and the federal laws of Canada applicable therein. If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions of this Agreement shall remain in full force and effect.

Introduction

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software nor any other technical data received from Pioneer, nor the direct product thereof, will be exported outside Canada except as authorized and as permitted by the laws and regulations of Canada. If the Software has been rightfully

Chapter

Introduction

END USER LICENSE AGREEMENT

Introduction

Chapter

Introduction

Chapter

Introduction

About the data for the map database

! Modifications related to roads, streets/high-

ways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database.

! Regardless of existing and newly-built

things, the data may be different from the actual condition.

! For details about the map coverage of this

navigation system, refer to the information on our website.

! It is strictly prohibited to reproduce and use

any part or the whole of this map in any form without permission from the copyright owner.

! If the local traffic regulations or conditions

deviate from this data, follow the local traffic regulations (such as signs, indications, etc.) and conditions (such as construction, weather, etc.).

! The traffic regulation data used in the map

database applies only to standard sized passenger vehicles. Note that regulations for larger vehicles, motorbikes, and other non-standard vehicles are not included in the database.

Important safety information

WARNING

! Do not attempt to install or service your navi-

gation system by yourself. Installation or servicing of the navigation system by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards.

! If liquid or foreign matter should get inside

this navigation system, park your vehicle to safe place and turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use the navigation system in this condition because doing so may result in a fire, electric shock, or other failure.

! If you notice smoke, a strange noise or odor

from the navigation system, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this navigation system in this condition may result in permanent damage to the system.

! Do not disassemble or modify this navigation

system, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal inspection, adjustments or repairs.

! Do not allow this product to come into contact

with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.

NAVTEQ Maps is a trademark of NAVTEQ.

! For copyright of contents, please check the

About window in the software. = For details, refer to More menu on page

62.

Introduction

Chapter

CAUTION

When a route is calculated, the route and voice guidance for the route are automatically set. Also, for day or time traffic regulations, only information about traffic regulations applicable at the time when the route was calculated is considered. One-way streets and street closures may not be taken into consideration. For example, if a street is open during the morning only, but you arrive later, it would be against the traffic regulations so you cannot drive along the set route. When driving, please follow the actual traffic signs. Also, the system may not know some traffic regulations.

Before using your navigation system, be sure to read and fully understand the following safety information: ! Read the entire manual before operating

this navigation system.

! This navigation system may in certain cir-

cumstances display inaccurate position of your vehicle, the distance of objects shown on the screen, and compass directions. In addition, the system has certain limitations, including the inability to identify oneway streets, temporary traffic restrictions and potentially unsafe driving areas. Please exercise your own judgment in the light of actual driving conditions.

! The navigation features of your navigation

system (and rear view camera option if purchased) are intended solely as an aid to you in the operation of your vehicle. It is not a substitute for your attentiveness, judgment, and care when driving.

! Certain country and government laws may

prohibit or restrict the placement and use of this system in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of your navigation system.

! Do not operate this navigation system (or

the rear view camera option if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle.

Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating the system or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.

! Never allow others to use the system un-

less they have read and understood the operating instructions.

! Never use this navigation system to route

to hospitals, police stations or similar facilities in an emergency. Stop using any functions relating to the hands-free phoning and please call the appropriate emergency number.

! Route and guidance information displayed

by this equipment is for reference purposes only. It may not accurately reflect the latest permissible routes, road conditions, one way streets, road closures, or traffic restrictions.

! Traffic restrictions and advisories currently

in force should always take precedence over guidance given by the navigation system. Always obey current traffic restrictions, even if the navigation system provides contrary advice.

! Failure to set correct information about the

local time may result in the navigation system providing improper routing and guidance instructions.

! Never set the volume of your navigation

system so high that you cannot hear outside traffic and emergency vehicles.

! The data encoded in the built-in memory is

the intellectual property of the provider, and the provider is responsible for such content.

! Keep this manual handy as a reference for

operating procedures and safety information.

! Pay close attention to all warnings in this

manual and follow the instructions carefully.

Introduction

Chapter

Introduction

Failure to follow the warnings and cautions as described in this manual and on the product itself and/or failure to use this product properly may result in serious injury or death.

! Please remember to wear your seat belt at

all times while operating your vehicle. If you are in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.

! Never use headphones while driving.

Fuel cost management

These calculations are based only on the information that you provide and not on any data from the vehicle. The fuel mileage displayed is only a reference value, and does not guarantee the fuel mileage displayed can be obtained.

Traffic information

! Pioneer does not bear responsibility for the

accuracy of the information transmitted.

! Pioneer does not bear responsibility for

changes to information services provided by broadcasting stations or by related companies, such as cancellation of services or changing to pay-services. Also, we do not accept return of the product for this reason.

Speed limit indication

The speed limit is based on the map database. The speed limit in the database may not match the actual speed limit of the current road. This is not a definite value. Be sure to drive according to the actual speed limit.

Additional safety information

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.

WARNING

Do not install this product in a vehicle that does not have an ACC wire or circuitry available.

Handling the SD card slot

The SD memory card and SDHC memory card are collectively referred to as the “ SD memor y card”.

CAUTION

! Keep the SD memory card out of the reach of

small children to prevent them from accidentally swallowing it.

! Ejecting an SD memory card during data

transfer can damage the SD memory card. Be sure to eject the SD memory card by the procedure described in this manual.

! To prevent data loss and damage to the sto-

rage device, never remove it from this navigation system while data is being transferred.

! If data loss or corruption occurs on the sto-

rage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption.

! Never insert or eject an SD memory card

while driving.

! Do not insert anything other than SD memory

cards.

Notes before using the system

In case of trouble

Should the navigation system fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.

Introduction

Chapter

Visit our website

Visit us at the following site:

http://www.pioneerelectronics.com

In Canada

http://www.pioneerelectronics.ca

1 Register your product. 2 Receive updates on the latest products and

technologies.

3 Download owner’s manuals, order product

catalogs, research new products, and much more.

4 Receive notices of software upgrades and

software updates.

The names of private corporations, products and other entities described in this product are the registered trademarks or trademarks of their respective firms.

Checking part names and functions

3 421

1 SD card slot

p An SD memory card containing map

data is inserted at the factory.

p Do not erase the map data stored on the

SD memory card (inserted at the factory). Without the data, the navigation function is disabled.

2 Video output selector switch

The switch is used to change the resolution of video output to the AV receiver. ! When the switch is set to the left,

WQVGA video is output.

! When the switch is set to the right,

WVGA video is output.

3 Reset button

= For details, refer to Resetting the micro-

processor on the next page.

Introduction

4 Power indicator

Chapter

Introduction

Inserting an SD memory card

p The included SD memory card must be in-

serted into the SD card slot for prior to using the AVIC-U250 for the first time.

1 Insert an SD memory card into the SD card slot.

2 Gently press the card in against the spring latch until it stops, then release.

The card will lock firmly into place inside the SD card slot.

Resetting the microprocessor

CAUTION

Please refer to the related section before clearing.

% Press the reset button on this product with a pointed object such as the tip of a pen.

Reset button

The microprocessor should be reset under the following conditions: ! Prior to using this product for the first time

after installation.

! If the product fails to operate properly. ! When adding/removing additional pro-

ducts that connect to the navigation system.

! If your vehicle position is shown on the

map with a significant positioning error.

Before you start

Chapter

On first-time startup

When you use the navigation system for the first time, an initial setup process starts automatically. Follow the steps below.

1 Start the engine to boot up the system.

2 Wait approximately 10 seconds, and then press the MODE button of the AV receiver.

After a short pause, the navigation splash screen appears.

3 Set the video output selector switch according to your AV receiver.

p If the screen remains black after pressing

the MODE button of the AV receiver, set the switch to the other side.

= For details, refer to Checking part names

and functions on page 15.

4 Select the language that you want to use on the screen, then touch [Done].

p Later you can change it in “Regional” set-

tings.

= For details, refer to Customizing the regional

settings on page 60.

The navigation system will restart and the “End User Licence Agreement” screen is displayed.

5 Read the terms carefully, checking its details, and then touch [Accept] if you agree to the conditions.

Before you start

The configuration wizard starts.

6 Touch [Next] to continue.

7 Select the language that you want to use for voice guidance messages, then touch [Next].

p Later you can change it in “Sound and

Warnings” settings.

= For details, refer to Setting the volume and

the guidance voice for navigation system on

page 54.

8 If needed, modify the time format and unit settings, then touch [Next].

p Later you can change it in “Regional” set-

tings.

= For details, refer to Customizing the regional

settings on page 60.

Chapter

Before you start

9 If needed, modify the default route planning options, then touch [Next].

p Later you can change them in “Route Set-

tings”.

= For details, refer to Modifying the route cal-

culation conditions on page 42.

p You can restart the configuration wizard

later from the “Settings” menu.

= For details, refer to Starting the configuration

wizard on page 60.

10 Touch [Finish].

The initial setup is now complete. After touching [Finish], the “Navigation Menu” screen appears and you can start using the navigation system.

wait (approximately 10 seconds) after restart before pressing the MODE button.

Regular startup

1 Start the engine to boot up the system.

2 Press the MODE button of the AV receiver.

After a short pause, the navigation screen appears.

p The display will turn off if you press the

MODE button of the AV receiver immediately after the navigation system restarts, so

How to use the navigation menu screens

Screen switching overview

Navigation screen

Chapter

How to use the navigation menu screens

Press the MODE button of the AV receiver.

AV receiver screen (e.g. AVH-X5500BHS)

Chapter

How to use the navigation menu screens

What you can do on each menu

1 Map screen

Touch [Show Map] on the “Navigation Menu” screen.

2 Quick menu

Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the quick menu screen. The master volume slider at the bottom of the screen adjusts the sound volume of the device. All sounds of this system are affected.

p You can customize the menu options.

= For details, refer to Customizing the

quick menu on page 55.

3 “Navigation Menu” screen

Touch [Menu] on the map screen to display the “Navigation Menu” screen. This is the starting menu to access the desired screens and operate the various functions.

4 “Find” menu

You can search for your destination on this menu. Other features include useful functions to support your navigation.

5 “My Route” menu

You can display your route information on the map. You can also perform route-related actions such as editing or canceling your route on this menu.

6 “More...” menu

You can customize the way the navigation system works, to simulate demo routes or to run some additional applications.

7 Traffic summary screen

You can check the summary of traffic events on the set route.

Operating list screens (e.g. route settings screen)

1 Listed items

Touching an item on the list allows you to narrow down the options and proceed to the next operation.

2 Back

The previous screen returns. Touching and holding [Back] returns to the map screen.

3 Touching

you to see the next or previous page.

or on the right of screen allows

Operating the on-screen keyboard

345

1 Text box

Displays the characters that are entered.

2 Keyboard

Touch the keys to enter the characters.

p To enter a space, touch at the bottom

center of the screen.

How to use the navigation menu screens

p When entering text, the first character

appears in upper case while the rest of the text is in lower case. Touch enter an upper case letter or touch twice to turn on Caps Lock. Touch again and lower case letters return.

3 Back

The previous screen returns. Touching and holding [Back] returns to the map screen.

4 More

Touching [More] switches to another keyboard layout, for example from an English keyboard to a Greek keyboard.

5 Results

Touch to finalize the keyboard entry (open the list of search results). If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, touch [Results]).

Touch to switch to a keyboard offering numeric and symbol characters.

Touch to correct your entry on the keyboard. Touching and holding acters or the entire input string.

Touch to finalize the keyboard entry (accept the suggested search result).

deletes several char-

Chapter

How to use the navigation menu screens

Monitoring the GPS reception quality

In the top right corner, the GPS reception quality icon shows the current accuracy of the position information.

Indicator Meaning

: GPS navigation possible

: Insufficient GPS navigation

: GPS navigation not possible

: No connection to GPS receiver

Chapter

How to use the map

Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how information appears on the map.

How to read the map screen

p Information with an asterisk (*) appears

only when the route is set.

p Depending on the conditions and settings,

some items may not be displayed.

1 Name of the street to be used (or next gui-

dance point)*

Shows information about the next guidance point (maneuver) and the next street or the next city.

2 Next guidance point (maneuver)*

When you approach the next maneuver, this appears in orange. Both the type of the event (turn, traffic circle, exiting freeway, etc.) and its distance from the current position are displayed. A smaller icon shows the type of the second next maneuver if it is near the first one.

= For details, refer to Frequently shown

route events on the next page.

3 Distance to the next guidance point (man-

euver)*

Shows the distance to the next maneuver.

4 Second maneuver arrow*

Shows the turning direction after next guidance point and the distance to there.

5 Current position

Indicates the current location of your vehicle. The apex of the triangular mark indicates your orientation and the display moves automatically as you drive.

p The exact location of the arrow mark de-

pends on the vehicle type used for route calculation and the navigation mode.

= For details, refer to Changing the vehicle

used on page 42.

6 Menu key

Touch [Menu] to return to the “Navigation Menu” screen.

= For details, refer to What you can do on

each menu on page 20.

7 Street name (or city name) that your vehi-

cle is traveling along

8 Data field

How to use the map

Chapter

Touching this field displays route information during navigation. By default, only one data field is displayed. Touch this field to see all data fields.

= For details, refer to Browsing the data

field on page 25.

9 Current route*

The route currently set is highlighted in color on the map.

= For details of the POI icons, refer to Cus-

tomizing the map screen settings on

page 57.

a Traffic information

The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation.

b Quick menu

Touching this key causes the quick menu to appear.

= For details, refer to Quick menu on

page 20.

Frequently shown route events

Icon Description

Turn left.

Icon Description

Keep left.

Continue straight in the intersection.

Go left on the traffic circle, 3rd exit (next maneuver).

Enter traffic circle (second next maneuver).

Enter freeway.

Exit freeway.

Board ferry.

Leave ferry.

Approaching a waypoint.

How to use the map

Turn right.

Turn back.

Bear right.

Turn sharp left.

Approaching the destination.

Seeing the current position on the map

1 Display the “Navigation Menu” screen.

= For details of the operations, refer to Screen

switching overview on page 19.

+ 53 hidden pages