Modutrol IV Motors
Modutrol IV™ Series 2 and Series 3 Family of Motors “Contractor-Friendly” design for service and retrofit
INTERNAL
FIELD-ADDABLE
TRANSFORMER
|
|
|
RESISTOR |
CRANK |
|
BOARD |
ARM |
Modutrol IV™ Series 2 and Series 3 Motors replace all present generation Modutrol motors and set a new, certifiable standard for the industry. Modutrol IV™ Series 2 and Series 3 Motors retain all the features that make Honeywell Modutrol motors the most reliable produced, and go even further with many quality improvements.
Our engineers have incorporated Design for SIx Sigma methodology and Electronic Excellence to re-engineer this popular product. The motor has undergone a technology update integrating the proven DCA (Direct Coupled Actuator) microprocessor based design into the existing footprint of a Mod Motor.
The Series 2 and Series 3 Motors provide these features and benefits:
1.Dual shafts. Slotted and tapped at both ends. Both drive and auxiliary shafts have equal torque ratings, allowing auxiliary shaft to drive full torque loads. This provides a more flexible motor. For example, a spring-return, normally closed motor will provide normally open operation simply by using the auxiliary shaft.
2.NEMA 3 housing. Modutrol IV™ motor housings protect the motor from driving rain if motor is mounted in the upright position (as shown in above photo). May be mounted outdoors without a weatherproofing kit.
INTERNAL
FIELD-ADDABLE
AUXILIARY
SWITCHES
CONTROLLER
INTERFACE
MODULE M27252
3.Brushless DC sub motor provides a fixed torque over the entire voltage range.
4.Reduced power consumption. Motor power needs can always be satisfied with a 20 VA transformer.
5.Internal quality improvements. Results in improved performance and longer life. These quality improvements include:
•Microprocessor based technology eliminated the need for mechanical end stops.
•Brushless DC sub motor eliminates the need for oil.
6.Auxiliary Switch cams. All models have auxiliary switch cams that permit acceptance of 220736A,B Internal Auxiliary Switch Kits.
7.Field Adjustable stroke. Most models are field adjustable (i.e. 90 to 160 degrees).
TRADELINE motors and appropriate accessories can be configured to replace all previous Honeywell Modutrol motors, as well as most OEM modutrol motors. The appropriate accessories are listed with the different models and in tables near the end of this section.
412 |
customer.honeywell.com |
70-6910 |
Modutrol IV Motors
Modutrol IV™ Family of Motors
The following Modutrol IV™ motors can replace the old style Modutrol motors as shown below.
|
|
Mod IV Replacement |
|
Old Motors Replaced |
Non- |
M6184 |
M9164 |
M644 |
M734 |
Spring |
M6194 |
M9174 |
M744 |
M934 |
Return |
M6284 |
M9184 |
M941 |
|
|
M6294 |
M9194 |
M944 |
|
|
M7164 |
M9484 |
M954 |
|
|
M7284 |
M9494 |
|
|
|
M7294 |
|
|
|
Spring |
M4185 |
M7685 |
M445 |
Return |
M6285 |
M8185 |
M745 |
|
M7285 |
M9185 |
M845 |
|
M7286 |
|
M945 |
|
|
|
M955 |
Medium M9175 |
M765 |
Torque |
M865 |
Spring |
M965 |
Return |
M975 |
<![endif]>Commercial
<![if ! IE]><![endif]>Components
70-6910 |
|
|
|
413 |
|
|