Garmin nuvi2460LMT, EU w/Premium Traffic, nuvi 2555, CHN, nuvi 24xx EU placeholder, nuvi 2460LT, Europe with Premium Traffic, nuvi 2460LT Manual

nüvi® 2400 series

quick start manual

for use with these nüvi models: 2440, 2450, 2460

Getting Started

‹ WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

When using your device for the first time, complete the following tasks.

1.Connect the device to vehicle power (page 2).

2.Mount the device (page 4).

3.Register the device (page 5).

4.Check for updates.

•Software updates (page 5).

•Free map update (page 5).

5.Download the full owner’s manual (page 5).

Connecting the Device to Vehicle Power

‹ WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, remove the device from the vehicle when exiting or store it out of direct sunlight.

Charge your device before using it on battery power.

1.Fit the bottom of your device into the mount.

2.Tilt your device back until it snaps into place.

2	nüvi 2400 Series Quick Start Manual

3.Plug the vehicle power cable into the mini-USB connector on the mount.

4.Plug the other end of the vehicle power cable into a power outlet in your vehicle.

5.If you are using a traffic receiver in Europe, connect the external antenna to the traffic receiver and secure it to the windshield using the suction cups.

After the device has been connected to vehicle power, the following occurs.

•The device turns on.

•The device acquires satellite signals. When at least one of the

bars is green, your device has acquired satellite signals.

•NOTE: The device may need a clear view of the sky to acquire satellite signals.

•The device charges as you drive. in the status bar indicates the status of the internal battery.

nüvi 2400 Series Quick Start Manual

3

Mounting Your Device

Notice

Before mounting the device, see the Important Safety and Product Information guide for information about laws pertaining to windshield mounting.

1.Remove the clear plastic from the suction cup.

2.Clean and dry your windshield and the suction cup with a lint-free cloth.

3.Press the suction cup to the windshield.

4.While pressing, flip the lever back toward the windshield.

5.Snap the mount onto the suction cup arm .

About myDashboard

You can use myDashboard to register your device, check for software and map updates, access product manuals and support, and more.

Setting Up myDashboard

1.Connect the USB cable to the micro-USB connector on the device.

2.Connect the USB cable to the USB port on your computer.

3. Double-click to open the myDashboard Web page.

4	nüvi 2400 Series Quick Start Manual