DXS-1210-28T
Next Business Day Service
Product Highlights
10 Gigabit Ethernet Connection
The DXS-1210-28T/28S are both high-port 10G
switches, perfect choices for an SMB core switch or an
Enterprise aggregation switch
Server Farm
The DXS-1210-28T features 4 x 10 G/25 Gbps uplink
ports, ideal for a server farm top-of-rack (ToR)
Layer 3 Lite Functions
Wired speed inter-VLAN routing helps by reducing the
pressure of routers and backbone networks, improving
overall network eciency
DXS-1210-28T/28S
10 Gigabit Ethernet Smart Managed Switches
Features
High Availability and Flexibility
• 24 x 10GBASE-T or SFP+ ports
• 4 x 25G SFP28 or 10GBASE-T uplink ports
Security Features
• Access Control List
• IP-MAC-Port Binding
• Clientless MAC/Web Access Control
• D-Link Safeguard Engine
• Port Security
• ARP Spoong Prevention
Intuitive Management
• D-Link Network Assistant utility or Web-based GUI
• Built-in SNMP MIB for remote NMS (D-View 7)
• Full CLI through console and Telnet
Advanced Features
• Auto Surveillance VLAN
• Auto Voice VLAN
• Loopback Detection
• Cable Diagnostics
• Static Route
• LLDP/LLDP-MED
The DXS-1210-28T/28S 10 Gigabit Ethernet Smart Managed Switches are a cost-eective 10
Gigabit switches capable of servicing a range of network needs in any business environment.
The DXS-1210-28T is equipped with 4 x 10/25G SFP28 ports, enabling this series to serve as
either an aggregation/access switch in large enterprise environments or deployed at the
core of an SMB network. With high performance and low latency, these 10G smart-managed
switches full the needs of virtualisation, cloud services, and server-to-server applications.
The DXS-1210-28T/28S comes with a complete line-up of L2 features, including port mirroring,
Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). At the same time,
inter-VLAN static routing helps by reducing the pressure of routers and backbone networks,
improving overall network eciency. The free D-Link Network Assistant utility allows multiple
D-Link devices within the same L2 network to be discovered and managed. These switches also
provide management through the multi-lingual web UI, a full command-line interface (CLI)
through Telnet, a console port, as well as D-View 7 Network Management System.
Your network is the backbone of your business. Keeping it running is essential, even if the
unexpected happens. D-Link Assist is a rapid-response technical support service that replaces
faulty equipment quickly and eciently. Maximising your uptime and giving you the
condence that instant support is only a phone call away.
All D-Link products with 5-year or Limited Lifetime warranty come with complimentary Next
Business Day Service. D-Link will send out a replacement product to you on the next business
day after acceptance of a product failure. On receipt of the replacement product, you simply
arrange the return of the defective product to us. Any products with a 2-year/3-year warranty can
also benet from the Next Business Day advance replacement service when the optional 3-year
warranty extension has been purchased.
Find out more at eu.dlink.com/services
DXS-1210-28T/28S
10 Gigabit Ethernet Smart Managed Switches
Technical Specications
General DXS-1210-28T DXS-1210-28S
Ports
Console Port
Port Standard & Functions • IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• IEEE 802.3az Energy Efficiency Ethernet (EEE)
• IEEE 802.3an 10GBASE-T 10 Gigabit Ethernet
Network Cables for
10GBASE-T
Media Interface Exchange • Auto MDI/MDIX adjustment for all twisted-pair ports
• 24 x 10GBASE-T ports
• 4 x 10/25G SFP28 ports
• 24 x 10G SFP+ ports
• 4 x 10GBASE-T ports
• RJ-45 console port
• IEEE 802.3ae 10GbE over fiber
• IEEE 802.3z 1000BASE-X
• Auto MDI/MDIX support for 1000/10GBASE-T
• Cat. 6 (30 m max)
• Cat. 6A or Cat. 7 (100 m max)
Performance
Switching Capacity • 680 Gbps • 560 Gbps
Maximum Packet
Forwarding Rate
Transmission Method • Store-and-forward
MAC Address Table • Up to 32,000 entries per device
• 505.92 Mpps • 416.64 Mpps
Physical/Environmental
Acoustic • Fan at high speed: 51.9 dB(A)
• Fan at low speed: 40.0 dB(A)
• Fan at high speed: 52.3 dB(A)
• Fan at low speed: 40.2 dB(A)
Fans • 2 x Smart Fan
AC Input • 100 to 240 VAC
Max Power Consumption • 87.3 W • 85.7 W
Standby Power Consumption • 33 W • 27.7 W
Operating Temperature • -5 to 50 °C (23 to 122 °F)
Storage Temperature • -20 to 70 °C (-4 to 158 °F)
Operating Humidity • 0% to 95% non-condensing
Storage Humidity • 0% to 95% non-condensing
Dimensions (L x W x H) • 441 x 209.5 x 44 mm (17.36 x 8.28 x 1.73 in)
Weight • 3.07 kg • 3.27 kg
Diagnostic LEDs • Link/Activity/Speed (Per 10GBASE-T port)
• Link/Activity/Speed (Per 10G SFP+ port)
• Power
Certifications • CE Class A
• FCC Class A
• VCCI Class A
Safety • UL
• CB
• Console
• Fan error
• IC
• BSMI
• BSMI
Loading...