|
|
|
Project ___________________________________ |
|
|
|
Item _____________________________________ |
8100-EFN |
Quantity _ ________________________________ |
||
CSI Section 11400 |
|||
Approved _ _______________________________ |
|||
LiquiTec® Slim Line Drop-In Self-Contained Eutectic |
Date _____________________________________ |
||
Fluid Refrigerated Cold Pans |
|
||
|
|||
Models |
|
|
|
• |
8148-EFN |
2-pan narrow LiquiTec® cold pan |
|
• |
8169-EFN |
3-pan narrow LiquiTec® cold pan |
|
• |
8191-EFN |
4-pan narrow LiquiTec® cold pan |
|
|
Standard Features |
|
|
||
|
• 18 gauge stainless steel top construction |
|
|
• LiquiTec® cold pans with eutectic fluid technology |
|
|
• Flush mounted die stamped drawn 12” x 20” |
|
|
|
individual 20 gauge wells, run left to right |
|
• Wells to be depressed slightly into the top to hold |
|
|
|
condensation |
|
• Standard 1/2” stainless steel drain |
|
|
• High density environmentally friendly, Kyoto |
|
|
|
Protocol Compliant, Non ODP (Ozone Depletion |
|
|
Potential), Non GWP (Global Warming Potential) |
|
|
polyurethane foam insulation throughout unit |
|
• |
Galvanized exterior body |
|
• Thermostatic temperature control and expansion |
|
|
|
valve standard |
|
• Non-marring press fit top gasket |
|
|
• |
NSF7 certified |
|
• Condensing unit is suspended below on a 16 |
|
|
|
gauge galvanized frame |
|
• Environmentally friendly HFC-404A refrigerant |
|
|
• |
8’ cord |
8148-EFN |
• |
Stainless steel louver is provided standard for field |
|
|
installation |
|
• |
One year parts and 90 day labor standard |
|
|
warranty |
|
|
|
Options &
Accessories
•Single or double service flip-up sneezeguards
•Relocate compressor
•Remote refrigeration (specify refrigerant)
Specifications
LiquiTec® Cold Pans with Eutectic Fluid technology allows |
Refrigeration: system uses HFC-404A refrigerant. Eutectic |
|||||
food in pans to be flush with top of counter. Cold pan meets |
fluid is used as the heat transfer medium. Condensing unit is |
|||||
NSF standard 7; and can be dropped into any Delfield Mark 7, |
suspended below the cold pan on a 16-gauge steel frame. Unit |
|||||
Shelleyglas® or Shelleysteel® counters or existing counters. |
is supplied with expansion valve and temperature control. |
|||||
Top: is one-piece 18-gauge stainless steel, with 5/8” (1.59cm) |
A stainless steel louver is provided for field installation; cutout |
|||||
overhang around perimeter and die stamped 19.87” x 11.87” |
dimension is 11” x 22” (27.94cm x 55.88cm). A second opening |
|||||
(50.5cm x 30.2cm) openings with depressed edges. Formed |
11” x 22” (27.94cm x 55.88cm) at the rear of the cabinet should |
|||||
well below each opening is 6.25” (15.9cm) deep with .5” drain |
be provided at installation to allow for proper air circulation. |
|||||
to manifold. Each well, flush with the top, for flush mount pans |
|
|
|
|
||
to accommodate 12” x 20” (30.5cm x 50.8cm) pans 4” (7.6cm) |
Electrical system is 115V/60Hz/1Ph with NEMA 5-15P plug. |
|||||
or 6” (15.2cm) deep supplied by others. Temperatures of 33°F |
|
|
|
|
||
(1°C) to 41°F (5°C) are maintained at 86°F (30°C) ambient room |
|
|
|
|
||
temperature, meeting NSF 7 requirements. |
|
|
|
|
||
Sides and bottom: are insulated with high-density closed- |
|
|
|
|
||
cell environmentally friendly, Kyoto Protocol Compliant, Non |
|
|
|
|
||
ODP (Ozone Depletion Potential), Non GWP (Global Warming |
|
|
|
|
||
Potential) polyurethane. Exterior housing is 22-gauge galva- |
|
|
|
|
||
nized steel. |
|
|
|
|
|
|
|
|
|
|
|
|
|
980 S. Isabella Rd. |
|
Phone: 800-733-8948 or 989-773-7981 |
|
www.delfield.com |
|
|
|
|
|
||||
Mt. Pleasant, Michigan 48858 |
|
|
|
|||
|
Fax: 800-669-0619 |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pans Cold Refrigerated Fluid Eutectic Contained-Self In-Drop Line Slim LiquiTec® EFN-8100
Loading...