Bosch TDA3610GB, TDA3605GB Manual

DO NOT de-scale or clean the water tank with cleaning products

or solvents, as these could cause the iron to drip when using the
steam function.

DO NOT use a “professional steam cleaner” for cleaning the
appliance.

DO NOT use sharp objects or abrasive products to clean the
soleplate or any other part of the appliance. To keep the soleplate
in good condition, do not allow it to come into contact with metal
objects.

GUARANTEE TERMS

The terms of the guarantee for this appliance are in accordance with
that stated by our representative for the country in which it is sold.
Details of those conditions can be obtained from the retailer from
whom the appliance was purchased. The SALES RECEIPT must
be presented when making any claims against the terms of this
guarantee. We reserve the right to make technical modifications.

Environmental Care

This iron has been designed according to ecological criteria,
related to the sustainable development, analysing its whole
lifecycle - from material selection to its later reuse or recycling

- evaluating the improvement possibilities, from a technical,
economical and environmental point of view.

Before throwing a used appliance away, you should make it
noticeably inoperable e.g. cut off the mains lead and be certain to
dispose of it in accordance with current laws and regulations.

Your retailer, town council or local council can give you detailed
information about these.

This appliance is labelled in accordance with
European Directive 2002/96/EG concerning
used electrical and electronic appliances (waste
electrical and electronic equipment - WEEE).

The guideline determines the framework for the return
and recycling of used appliances as applicable throughout
the EU.

Important

This appliance has been designed exclusively for domestic use
and must not be used for industrial purposes.

Carefully read through the operating instructions for the appliance
and safeguard them for future reference.

002 TDA36..GB/03/10

Customer Service

Great Britain

Bosch Customer Service

Grand Union House

Old Wolverton Road

Milton Keynes

MK12 5PT

UK [phone]

IRL [phone]

www.bosch-home.co.uk

Operating instructions

Solving Minor Problems Yourself

Problem Possible Causes Solution

Iron does not
work or is not
heating up

Temperature control (I) on a
very low setting

Turn the temperature
control to the desired
position

Connection problems Check that the plug is

inserted into the mains
socket correctly

The automatic shut-off
system (*) has been activated

Move the iron gently from
side to side to re-start it

Iron is not
steaming

There is no water in the tank Fill the water tank
The steam regulator (C) is in

the «0» position

Set the steam regulator
to the relevant position

Scale obstruction of internal
components

Remove the steam
regulator (C) and clean
it. If this does not help
contact an Authorised
Technical Service Centre

Water is
dripping from
the holes in
the soleplate

Temperature control (I) setting
is too low

Set the temperature
control within the steam

area (between the “••”

and “max”) or turn the
steam regulator (C) to «0»

You have pressed the shot of
steam button (A) repeatedly
without waiting for 5 seconds
between each press

Wait 5 seconds between
each press of the jet of
steam button

Water has been left in the
tank (F) when the soleplate
was cold, with the steam
regulator (C) set at «1» or «2»

Always empty the tank
after ironing and set the
steam regulator to «0»
after ironing and when
filling the tank

Tap or part distilled water has
not been used (see “Filling the
water tank” section) or other
products such as fragrant
water have been added to the
tank

Mix distilled water with
tap water as directed
in the “Filling the water
tank” section and never
add any other products
to the water tank

Deposits come
out through
the holes in the
soleplate

Traces of lime scale are
coming out of the steam
chamber

Carry out a cleaning
cycle (see Multiple de­scaling system section)

Spray does not
work

No water in the tank. Add water to the water

tank.

Obstructed mechanism. Contact an Authorised

Technical Service Centre.

The iron
begins to
smoke when
switched on.

During first use: Certain
components on the appliance
have been lightly greased at the
factory and may produce a little
smoke when initially heated.

This is completely normal
and will stop after a short
while.

Flashing lamp
on top of
handle (*)

Auto-shut off has been
activated.

Move the iron gently
fromside to side to re­start it. The lamp (N) will
then flash once before it
re-heats

Thank you for buying the TDA36 steam iron from Bosch. This iron
has a lightweight design and is built to perform

These instructions contain valuable information about the unique
features of this iron and some hints to make ironing easier for
you.

Please visit www.bosch-home.co.uk for more product
information or to register your product, just follow the link
to the Online guarantee registration.

Before using the iron for the first time

Please carry out the following steps:

1. Remove the protective cover from the soleplate before using
the iron.

2. While the iron is unplugged, fill the water tank (F) with tap
water

3. Plug the appliance into the mains and set the temperature
control (I) to the “max” position by lining it up with the pointer
(H).

4. When the iron has reached the correct temperature (the pilot
lamp K goes out), set the steam regulator (C) to the «2» position
by lining it up with the pointer (D).

5. Hold the iron horizontally and repeatedly press the shot of steam
button (A). Any residue should come out of the soleplate (G).
It may smoke and smell – this is normal and will cease after a
short while.

6. If necessary, carefully clean the soleplate down with a dry, folded
cloth

Cleaning and Maintenance

Attention ! Risk of burns !

For general cleaning, follow the information below:

Problem Solution

Dirty/lightly
marked iron body
or soleplate

Clean the body of iron or soleplate with a
damp cloth then dry it.

Mark develops on
soleplate during
use

Set the iron to its maximum temperature
setting. Rub the iron a few times over
with a dry cotton cloth folded several
times.

Heavily stained
soleplate

While the iron is cold, iron a linen cloth
soaked in white vinegar. Then dampen a
cloth with water and wipe the soleplate
clean and dry thoroughly.

TDA 36..

sensixx B2

(*) Model dependent

You can download this manual from the local homepages of Bosch



General safety warnings

• Danger of electric shocks or fire!

• This appliance is to be connected and used in accordance with

the information stated on its characteristics plate.

• This appliance must be connected to an earthed socket. If

it is absolutely necessary to use an extension cable, make
sure that it is suitable for 16A and has a socket with an earth
connection.

• The iron should not be used if it has been dropped, if there

are visible signs of damage or if it is leaking water. It must be
checked by an authorized Technical Service Centre before it
can be used again.

• Do not allow the power cable to come into contact with the

soleplate when it is hot.

• In order to avoid that, under unfavourable mains conditions,

phenomena like transient voltage drops or lighting fluctuations
can happen, it is recommended that the iron is connected to a
power supply system with a maximum impedance of 0.27Ω . If
necessary, the user can ask the public power supply company
for the system impedance at the interface point.

• This appliance is not intended to be used by persons (including

children) with reduced physical, sensory or mental capacities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance
by a person responsible for their safety.

• Keep the appliance out of children’s reach.

• Children should be supervised to ensure that they do not play

with the appliance.

• Remove the plug from the socket before filling the appliance with

water or before pouring out the remaining water after use.

• The appliance must be used and placed on a stable surface.

• When placed on its stand, make sure that the surface on which

the stand is placed is stable.

• The iron must not be left unattended while it is connected to

the supply mains.

• Unplug the appliance from the mains supply after each use, or

if a fault is suspected.

• The electrical plug must not be removed from the socket by

pulling the cable.

• Never immerse the iron in water or any other fluid.

• Do not leave the appliance exposed to weather conditions (rain,

sun, frost, etc.)

• With the aim of avoiding dangerous situations, any work or

repair that the appliance may need, e.g. replacing a faulty mains
cable, must only be carried out by qualified personnel from an
Authorised Technical Service Centre.