Quick Installation Guide
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router
Please select your preferred setup wizard.
CD Setup Wizard
For Windows users only
Web-based Quick Setup Wizard
For Mac OS/Linux/Windows users who are unable to run the Resource CD
MODEL NO. TD-W8980/TD-W8980B
Web-based Quick Setup Wizard
Package Contents
The product model shown in this QIG is TD-W8980, as an example.
TD-W8980
Ethernet Cable
N600 Wireless Dual Band Giabit ADSL2+ Modem Router
Please select your preferred setup wizard.
CD Setup Wizard
For Windows users only
Web-based Quick Setup Wizard
For Mac OS/Linux/Windows users who are unable to run the Resource CD
TD-W8980/TD-W8980B
QIG
Power Adapter |
Resource CD |
ADSL Splitter |
Phone Cable x 2 |
Necessary Information
For a smoother setup, we suggest that you consult yourISP rst and ask for the following information . This information will be used during the con guration stage.
VPI/VCI: Connection Type: Encapsulation Type (Optional):
( For Mac OS/Linux/Windows users who are unable to run the Resource CD)
CD Setup Wizard ( For Windows users only )
1 |
Insert the TP-LINK Resource CD into the CD-ROM drive. |
3 |
Then a ash video will pop up and show you how to connect |
|
your devices. When you nish the hardware connection, click |
||
|
|
|
to continue. |
2 |
Click StartSetup. |
4 |
The Easy Setup Assistant will start. Please check to see if the |
|
LEDs (especially the ADSL LED) of your modem router display |
normally as the chart describes. Then click NEXT, and follow the step-by-step instruction until you complete the con guration.
For the advanced con gurations, please refer to the User Guide on the Resource CD provided. You can also log on to www.tp-link.com -> select your region -> search for the product -> User Guide can be found under the “Download” tab on the product page.
1 Hardware connection.
Phone Cable
Wall Socket
Splitter
1 |
|
Computer |
3 |
2 |
|
Phone Cable |
Ethernet Cable |
|
|
|
Step 1: Connect your devices step by step following the gure.
Step 2: Power on all your devices and then check the LEDs (especially the ADSL LED).
Name |
Status |
Indication |
|
(Power) |
On |
The modem router is powerd on. |
|
|
On |
ADSL line is synchronized and ready |
|
(ADSL) |
to use. |
||
|
|||
|
|
||
|
Flashing |
ADSL negotiation is in progress. |
|
(WLAN) |
Flashing |
Wireless is enabled. |
|
|
On |
There is a device conneted to this LAN |
|
|
port. |
||
(LAN 1-4) |
|
||
|
The modem router is sending or receiving |
||
|
Flashing |
||
|
|
data over this LAN port. |
2Open your browser and type http://192.168.1.1 in the address eld. Then use the default user name admin and password admin to log in.
If you are unable to access 192.168.1.1, please refer to T3 in Troubleshooting.
3 |
Click Quick Setup in the main menu and then click Next. |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7106504377 REV1.1.0