TOSHIBA AMERICA INFORMATION SYSTEMS
STORAGE DEVICE DIVISION
IRVINE, CALIFORNIA
SD-R2102
CD-RW/DVD-ROM COMBINATION MOBILE DRIVE
USER MANUAL
CONTENTS |
|
Introduction.............................................................................. |
1 |
Setup ........................................................................................ |
3 |
Using the CD-RW/DVD-ROM Combo Drive............................ |
4 |
Troubleshooting....................................................................... |
6 |
Specifications .......................................................................... |
7 |
Drive Connectors................................................................... |
10 |
INTRODUCTION – SD-R2102
General Features
CD-RW disc write/rewrite at 4X and 8X
3-way Disc Eject (eject button, software, emergency eject hole)
Average Access Time
CD 120ms
DVD-ROM 140ms
Horizontal or Vertical Mount
2MByte Buffer
Playback interchangeability for CD-ROM and DVD-ROM discs
Regionalization (RPC2 compliance) (DVD)
BUS Interface |
ATAPI |
Types of Disc Formats Supported – Write:
•Applicable Write Format CD-R, CD-RW: Disc at once, Track at once, Session at once, Packet write
•Applicable Write disc CD-R, CD-RW: CD-DA, CD+(E)G, CD-MIDI, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video-CD), Multisession CD (Photo-CD, CDEXTRA, Portfolio)
Types of Disc Formats Supported – Read:
DVD: |
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R (playback only), CPRM non- |
|
correspondence |
CD: |
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, |
|
CD-I, CD-I Bridge (Photo-CD, Video-CD), Multi-session (Photo-CD Disc, CD-Extra, |
|
Portfolio, CD-R, CD-RW), CD-R (read), CD-RW (read) |
1
Front Panel
Figure 1.SD-R2102 CD-RW/DVD Combo Drive Front Panel
Loading |
Load disc using tray. |
Tray |
|
Busy |
The LED lights green or amber when the drive is operating (LED is amber when drive is |
Indicator |
writing.) |
Eject |
The Eject button is used to open the disc tray so you can install or remove a disc. |
Button |
|
Emergency |
The emergency eject hole is to be used only when the Loading Tray will not open when |
Eject Hole |
Eject button is pressed. |