Samsung SM-N930V, SM-N930A, SM-N930P, SM-N930T, SM-N930U User manual

SM-N930V/A/P/T/U/

VL/R4/R6/R7/W8

Common

Mobile Device

CONTENTS

1. Safety Precautions

2. Specification

3. Product Function

4. Exploded View and Parts list

5. MAIN Electrical Parts List

6. Level 1 Repair

7. Level 2 Repair

8. Level 3 Repair

9. Reference data

Notice: All functionality, features, specifications, and other product information provided in this document, including but not limited to, benefits, design, pricing, components, performance, availability, and capabiliti-es of the product are subject to change without notice. Samsung reserves the right to alter this doc-ument or the product described herein at anytime, without obligation to provide notification of such changes.

	This Service Manual is a property of Samsung Electronics Co.,Ltd.	Samsung Electronics Co.,Ltd
	Any unauthorized use of Manual can be punished under applicable
	International and/or domestic law.	2016. 08. Rev 1.0

2. Specification

2-1. CDMA/LTE General Specification

	US PCS		CDMA	GPS		LTE FDD B4
					LTE FDD B13
Tx Freq. range	1850 ~ 1910MHz		824.04 ~ 848.97MHz			1710~1755 MHz
					777 ~787 MHz
Rx Freq. range	1930 ~ 1990MHz		869.04 ~ 893.97MHz	1575.42MHz		2110~2155 MHz
					746 ~ 756 MHz
Channel Bandwidth	1.23MHz		1.23MHz	2MHz		5, 10, 20 MHz
					10 MHz
Channel Spacing	50KHz		30KHz	Not Used		180KHz
					180KHz
Number of Channel	1200	832		1		25, 50, 100
					50(# of RB)
Duplex Separation	80MHz		45MHz	-		400 MHz
					31MHz
						4M53G7D (QPSK)
						4M49W7D (16QAM)
					4M52G7D (QPSK)	8M99G7D (QPSK)
Type of Emission	1M29F9W		1M28F9W	-	4M50W7D (16QAM)	8M97W7D (16QAM)
					8M97G7D (QPSK)	13M5G7D (QPSK)
					8M96W7D (16QAM)	13M5W7D (16QAM)
						18M0G7D (QPSK)
						18M0W7D (16QAM)
Tx Local Frequency	FTx * 0.7999		FTx * 1.6666	-
Rx Local Frequency	FRx * 0.8888		FRx * 2	FRx * 2
Frequency Stability	(FRX-80MHz)±150Hz		(FRX-45MHz)±300Hz
Operating
	-30 ~ +60		-30 ~ +60	-30 ~ +60	-30 ~ +60	-30 ~ +60
Temperature

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

2. Specification

		LTE FDD B2	LTE FDD B5
	Tx Freq. range	1850 ~ 1910 MHz	824 ~ 849 MHz
	Rx Freq. range	1930 ~ 1990 MHz	869 ~ 894 MHz
	Channel Bandwidth	5, 10, 20 MHz	5, 10 MHz
	Channel Spacing	180KHz	180KHz
	Number of Channel	25, 50, 100	25, 50
	Duplex Separation	80 MHz	55 MHz
		4M50G7D (QPSK)
		4M50W7D (16QAM)
		8M98G7D (QPSK)	4M53G7D (QPSK)
	Type of Emission	8M96W7D (16QAM)	4M51W7D (16QAM)
		13M5G7D (QPSK)	8M99G7D (QPSK)
		13M5W7D (16QAM)	8M97W7D (16QAM)
		18M0G7D (QPSK)
		18M0W7D (16QAM)
	Tx Local Frequency
	Rx Local Frequency
	Frequency Stability
	Operating Temperature	-30 ~ +60	-30 ~ +60

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

2. Specification

2-2. GSM/WCDMA General Specification

		GSM850	EGSM	DCS1800		PCS1900	WCDMA	WCDMA	WCDMA	WCDMA	WCMDA
			900				2100	1900	1700	900	850
	Freq.			1710~178	1850~191		1922~197	1852~190	1710~175
	Band[MHz
		824~849	880~915	5	0		7	7	5	880~915	824~849
	]	869~894	925~960	1805~188	1930~199		2112~216	1932~198	2110~215	925~960	869~894
	Uplink/
				0	0		7	7	5
	Downlink
							UL:	UL:	UL:	UL:	UL:
			0~124				9612~988	9262~953	1312~151	2712~286	4132~423
	ARFCN	128~251		512~885	512~810		8	8	3	3	3
			& 975~10
	range						DL:	DL:	DL:	DL:	DL:
			23
							10562~10	9662~993	1537~173	2937~308	4357~445
							838	8	8	8	8
	Tx/Rx	45MHz	45MHz	95MHz		80MHz	190MHz	80MHz	400MHz	45MHz	45MHz
	spacing
	Mod. Bit	270.833kb	270.833k	270.833kb	270.833k
	rate/	ps	bps	ps		bps	3.84Mcps	3.84Mcps	3.84Mcps	3.84Mcps	3.84Mcps
	Bit Period	3.692us	3.692us	3.692us		3.692us
							FrameLen	FrameLen	FrameLen	FrameLen	FrameLen
	Time Slot						gth:	gth:	gth:	gth:	gth:
	Period/	576.9us	576.9us	576.9us		576.9us	10ms	10ms	10ms	10ms	10ms
	Frame	4.615ms	4.615ms	4.615ms		4.615ms	Slotlength	Slotlength	Slotlength	Slotlength	Slotlength
	Period						:	:	:	:	:
							0.667ms	0.667ms	0.667ms	0.667ms	0.667ms
	Modulatio	0.3GMSK	0.3GMSK	0.3GMSK		0.3GMSK	QPSKHQ	QPSKHQ	QPSKHQ	QPSKHQ	QPSKHQ
	n						PSK	PSK	PSK	PSK	PSK
	MS Power	33dBm~5	33dBm~5	30dBm~0		30dBm~0	24dBm~	24dBm~	24dBm~	24dBm~	24dBm~
		dBm	dBm	dBm		dBm	-50dBm	-50dBm	-50dBm	-50dBm	-50dBm
	Power	5pcl ~	5pcl ~ 19pcl	0pcl ~ 15pcl	0pcl ~ 15pcl		3(max+24d	3(max+24d	3(max+24d	3(max+24d	3(max+24d
	Class	19pcl					Bm)	Bm)	Bm)	Bm)	Bm)
	Sensitivit	-102dBm	-102dBm	-100dBm		-100dBm	-	-	-	-	-
	y						106.7dBm	106.7dBm	106.7dBm	106.7dBm	106.7dBm
	TDMA	8	8	8	8		8	8	8	8	8
	Mux
	Cell	35Km	35Km	2Km		2Km	2Km	2Km	2Km	2Km	2Km
	Radius

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

2. Specification

2-3. GSM Tx Power Class

	TX Power			TX Power				TX Power				TX Power
	control	GSM850		control		EGSM900		control		DCS1800		control		PCS1900
	level			level				level				level
5		33±2 dBm		5		33±2 dBm		0		30±3 dBm		0		30±3 dBm
6		31±2 dBm		6		31±2 dBm		1		28±3 dBm		1		28±3 dBm
7		29±2 dBm		7		29±2 dBm		2		26±3 dBm		2		26±3 dBm
8		27±2 dBm		8		27±2 dBm		3		24±3 dBm		3		24±3 dBm
9		25±2 dBm		9		25±2 dBm		4		22±3 dBm		4		22±3 dBm
10		23±2 dBm		10		23±2 dBm		5		20±3 dBm		5		20±3 dBm
11		21±2 dBm		11		21±2 dBm		6		18±3 dBm		6		18±3 dBm
12		19±2 dBm		12		19±2 dBm		7		16±3 dBm		7		16±3 dBm
13		17±2 dBm		13		17±2 dBm		8		14±3 dBm		8		14±3 dBm
14		15±2 dBm		14		15±2 dBm		9		12±4 dBm		9		12±4 dBm
15		13±2 dBm		15		13±2 dBm		10		10±4 dBm		10		10±4 dBm
16		11±3 dBm		16		11±3 dBm		11		8±4 dBm		11		8±4 dBm
17		9±3dBm		17		9±3dBm		12		6±4 dBm		12		6±4 dBm
18		7±3 dBm		18		7±3 dBm		13		4±4 dBm		13		4±4 dBm
19		5±3 dBm		19		5±3 dBm		14		2±5 dBm		14		2±5 dBm
								15		0±5 dBm		15		0±5 dBm

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

3. Operation Instruction and Installation

Main Function

Item	Description
OS	Android V6.0.1 (Marshmallow)
	2G CDMA : BC0/BC1/BC10
	2G GSM 850(B5)/900(B8)/1800(B3)/1900(B2)
	3G WCDMA : B1/B2/B4/B5/B8
RF	4G(LTE)

-FDD : B2 / B3 / B4 / B5 / B7 / B8 / B13 / B18 / B19 / B20 + B1 / B12 / B17 / B25 / B26 / B29 / B30

-TDD : 38/39/40/41

-TD-SCDMA : B34/B39

	Battery	3,500mAh
	Base Band	MSM8996 / 2.15GHz, 1.6GHz
	Other RF	GPS, Glonass, BT 4.2, USB 3.1, WIFI 802.11 a/b/g/n/ac (2.4G+5GHz), NFC, MST
		12 MP Rear, Dual Pixel, AF
	Camera
		5.0 MP Front
	LCD	5.67” Quad HD, 2560 x 1440, dual edge Super AMOLED
	RAM	4GB LPDDR4 + 64GB UFS
		Accelerometer, Barometer, Fingerprint Sensor, Gyro Sensor, Geomagnetic Sensor, Hall Sensor,
	Sensor
		HR Sensor, Iris Sensor, Proximity Sensor, RGB Light Sensor
		Charger : 5V/2A or 9 V/1.67 A
	Accessory	Data cable : USB Type-C
		Earjack : 3.5pi, 4Pin
		S-PEN

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

9. Reference Abbreviate

Reference Abbreviate

―AAC: Advanced Audio Coding.

―AVC : Advanced Video Coding.

―BER : Bit Error Rate

―BPSK: Binary Phase Shift Keying

―CA : Conditional Access

―CDM : Code Division Multiplexing

―C/I : Carrier to Interference

―DMB : Digital Multimedia Broadcasting

―EN : European Standard

―ES : Elementary Stream

―ETSI: European Telecommunications Standards Institute

―MPEG: Moving Picture Experts Group

―PN : Pseudo-random Noise

―PS : Pilot Symbol

―QPSK: Quadrature Phase Shift Keying

―RS : Reed-Solomon

―SI : Service Information

―TDM : Time Division Multiplexing

―TS : Transport Stream

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

1.Safety Precautions

1-1. Repair Precaution

Before attempting any repair or detailed tuning, shield the device from RF noise or static electricity discharges.

Use only demagnetized tools that are specifically designed for small electronic repairs, as most electronic parts are sensitive to electromagnetic forces.

Use only high quality screwdrivers when servicing products. Low quality screwdrivers can easily damage the heads of screws.

Use only conductor wire of the properly gauge and insulation for low resistance, because of the low margin of error of most testing equipment.

We recommend 22-gauge twisted copper wire.

Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily damaged, even with relatively low heat. Never use a soldering iron with a power rating of more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).

Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected. Always use the replacement parts that are registered in the SEC system. Third-party replacement parts may not function properly.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

1.Safety Precautions

1-2. ESD(Electrostatically Sensitive Devices) Precaution

Many semiconductors and ESDs in electronic devices are particularly sensitive to static discharge and can be easily damaged by it. We recommend protecting these components with conductive anti-static bags when you store or transport them.

Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate static electricity from your body before repairing ESDs.

Ensure that soldering irons have AC adapter with ground wires and that the ground wires are properly connected.

Use only desoldering tools with plastic tips to prevent static discharge.

Properly shield the work environment from accidental electrostatic discharge before opening packages containing ESDs.

The potential for static electricity discharge may be increased in low humidity environments, such as air-conditioned rooms. Increase the airflow to the working area to decrease the chance of accidental static electricity discharges.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

6-1. S/W installation

6-1-1. Required items in order to install S/W

Installation program: Downloader Program (Odin3 v3.12.5.exe)

Mobile Phone

Data Cable

Mobile device specific S/W: Binary files

Settings

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

6-1-2. S/W Installation Program (Downloader program)

 Open up the S/W Installation Program by executing the "Odin3 v3.12.5.exe"

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

1. Enable the check mark by click on the following options,

-Check Auto Reboot, Re-Partition, and F. Reset Time-

-Check PIT

-Check Nand Erase All

-Check BL, AP, CP, and CSC Files

*Note : "Odin v3.12 or above" checks MD5 checksum just after file selection.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

2. Enter into Download Mode

-Enter into Download Mode by pressing Home button, Volume Down button and Power On/Off

Button simultaneously followed by pressing Volume up button as a direction of the phone.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

3. Connect the device to PC via Data Cable.

Make sure that the one of communication ports [ID:COM] box is highlighted in sky blue. The device is now connected with the PC and ready to download the binary files in it.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

4. Start downloading the binary files into the device by clicking Start button on the screen. The green colored "PASS!" sign will appear on the upper-left box if the binary files have been successfully downloaded into the device.

5. Disconnect the device from the Data cable.

6. Once the device boots up, you can check the version of the binary file or name by pressing the following code in sequence;

*#1234#

You can perform Factory Reset by Settings → Accounts → Backup and reset

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

6-2 IMEI writing

6-2-1 Preparation

-New IMEI writing Program has been released.

-Supported Model : Models which CAB files are uploaded on HHPsvc INI File category, instead of ini file.

-Refer to below IMEI writing procedure.

-H/W

- S/W

Library Install	To use Daseul, library files should be installed.
	Refer to SVC Bulletin
	“(11-82) Daseul (New IMEI writing Program) Library Install
	guide_rev1.0”
Launcher	DASEUL_SVC_Launcher_v3_0_25 or higher
	-Uploaded on HHPsvc Notice
Runtime File	1. DASEUL_Runtime_Ver_3.1.139.0.CAB or higher
	-Uploaded on HHPsvc Notice
	2. Make ‘ModelName’ folder at the same position with
	launcher & Runtime file.
Model File	Copy Model File under the ‘Model Name’ folder

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

6-2-2 IMEI writing Process

1.Run DASEUL_SVC_Launcher_v3.0.10.exe

2.Select Service Mode

3. Click and Select folder where the Launcher exists

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

4. Select Model

5. Check IMEI and click System Setting

Once you setup the setting, you don t have to do it again, unless there is change. From second run of the IMEI program, check IMEI and click Extract & Run.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6.Level 1 Repair

6.Check IMEI Write / IMEI Check and click IMEI SVC & Repair Option.

7. Check SVC , User Ticket No and click OK

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6.Level 1 Repair

8.Click Hardware Config

9. Click Port Setting

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

10. Select Port Number and SAVE

11.Click OK to proceed

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

12. Click Model Info and OK when pop-up shows

13. Click OK

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

14. Input SKU_CODE and BUYER, then click Save button.

Refer to HHPsvc→IMEI Review to check SKU Code and buyer

15. Input IMEI Number and click Apply

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

16. Click Start, and input IMEI writing ID and Password →input Ticket No

17. Connect the phone to Anyway JIG

When you connect the phone, the phone should be turned off.

After connecting the phone, the phone will be booted automatically.

18. IMEI Writing Proceeding

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

19. IMEI Writing Success

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

6-3. RF Calibration

6-3-1. Required items in order to calibrate RF

a.Installation program: RF Calibration Program

-DASEUL_Launcher_v4.0.0.exe

-DASEUL_CAL_ALL_Runtime_3.1.211.0_r00402.CAB

-Model File (SM-N930F_OPEN_CALIBRATION_Ver_3.1.206.7.CAB)

It is required to use the latest program.

b.Mobile Phone (DUT)

c.Type-C IF Cable (GH81-11962W)

d.JIG BOX (S103, GH81-12520B)

e.JIG BOX Adapter (GH81-11888K)

f.UART Serial Cable

g.E3632A Power Supply

h.Current Cable

i.R&S CMW500

j.GPIB Cable (2ea)

k.Table of test cables

GH81-11962W

IF Cable

USB C type

GH81-11962M GH81-11962U

			1.2T, 102mm	SMAP, 300mm
	RF Cable
			2ea	2ea
	(Manual)

			GH81-11962A			GH81-11962B			GH81-11962E
	4 Port Divider		Divider			Divider Cable			50Ω terminator
									2ea

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6.Level 1 Repair

●Cable setting

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6. Level 1 Repair

6-3-2. RF Calibration Program

1.Uninstall DASEL Library and install latest version.

(Daseul_Library_Installer_151217_v2.3.7 or later)

2.Place three files below in the same folder, and Run the RF Calibration Program Launcher,

‘DASEUL_Launcher_v4.0.0.exe'.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

6.Level 1 Repair

3.Check the 'Calibration' menu, and select 'Extract & Run'.

Confidential and proprietary-the contents in this service guide subject to change without prior notice

Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.