DIGITAL MEDIA RECEIVER RÉCEPTEUR MÉDIA NUMÉRIQUE RECEPTOR DE MEDIOS DIGITALES
MVH-290BT MVH-291BT
Español Français English
Owner’s Manual
Mode d’emploi
Manual de instrucciones
Important (Serial number)
The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Important (Numéro de série)
Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.
Importante (Número de serie)
El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad, asegúrese de anotar este número en la tarjeta de garantía que se adjunta.
Table of Contents |
|
Before You Start ......................................................................... |
2 |
Getting Started .......................................................................... |
4 |
Radio ............................................................................................ |
6 |
USB/AUX ...................................................................................... |
6 |
Bluetooth..................................................................................... |
8 |
Settings...................................................................................... |
10 |
FUNCTION settings ............................................................... |
11 |
AUDIO settings....................................................................... |
11 |
SYSTEM settings .................................................................... |
12 |
Connections/Installation........................................................ |
13 |
Additional Information........................................................... |
16 |
Before You Start
Thank you for purchasing this PIONEER product
To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.
FCC ID: AJDK096
MODEL NO.: MVH-290BT/MVH-291BT IC: 775E-K096
This device complies with Part 15 of FCC Rules and Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The Bluetooth antenna cannot be removed (or replaced) by user.
This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
About this manual:
•In the following instructions, a USB memory or USB audio player are referred to as “USB device”.
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
2 En
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving.
Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
•Set your volume control at a low setting.
•Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
•Once you have established a comfortable sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
•Do not turn up the volume so high that you can’t hear what’s around you.
•Use caution or temporarily discontinue use in potentially hazardous situations.
•Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
WARNING
•Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
•Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device.
CAUTION
•Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.
•Always keep the volume low enough to hear outside sounds.
•This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065.
After-sales service for Pioneer products
Please contact the dealer, distributor from where you purchased this unit or the authorized PIONEER Service Station for after-sales service or any other information. In case the necessary information is not available, please contact the companies listed below:
Please do not ship your unit to the companies at the addresses listed below for repair without contacting them in advance.
U.S.A. and CANADA
Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760
Long Beach, CA 90801-1760 800-421-1404
For warranty information please see the Limited Warranty sheet included with this unit.
English
En 3
Getting Started
Basic operation
MVH-290BT/291BT
M.C. (multi-control) dial
SRC (source)/OFF |
|
Display button |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BAND/DIMMER |
Hook Button |
|
|
|
Detach button |
|||||||||||||
|
|
|
|
Display |
window |
|
|
|
|
|
Frequently used operations
Purpose |
Operation |
|
|
Turn on the power* |
Press SRC/OFF to turn on the power. |
||
|
Press and hold SRC/OFF to turn off the |
||
|
power. |
|
|
Adjust the volume |
Turn the M.C. dial. |
|
|
Select a source |
Press SRC/OFF repeatedly. |
|
|
Change the display information |
Press DISP repeatedly. |
|
|
Return to the previous display/list |
Press BAND/DIMMER |
. |
|
Return to the normal display from the |
Press and hold BAND/DIMMER |
. |
|
menu |
|
|
|
4 En
Purpose |
Operation |
|
Answering/ending a call |
Press |
. |
|
|
|
*When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.
Display indication
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when the automatic answering function is set (page 9).
Appears when the button is pressed.
Appears when the local seek tuning function is set (page 11).
Appears when random/shuffle play is set (except when BT AUDIO and AOA).
Appears when repeat play is set (except when BT AUDIO and
AOA).
Appears when a Bluetooth connection is made (page 8).
Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it.
Detach |
Attach |
Important
•Avoid subjecting the front panel to excessive shock.
•Keep the front panel out of direct sunlight and high temperatures.
•Always store the detached front panel in a protective case or bag.
Setup menu
When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display.
1Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C. dial to select [NO], then press to confirm.
2Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item |
Description |
CLOCK SET |
Set the clock. |
|
|
3[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm.
4 Press the M.C. dial to confirm the settings.
NOTES
•You can cancel the menu setting by pressing SRC/OFF.
•These settings can be made at any time from the SYSTEM settings (page 12) and INITIAL settings (page 5).
Canceling the demonstration display (DEMO OFF)
1 Press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [SYSTEM], then press to confirm.
3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4 Turn the M.C. dial to select [YES], then press to confirm.
INITIAL settings
1 Press and hold SRC/OFF until the unit turns off.
2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [INITIAL], then press to confirm.
4 Turn the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
Menu Item |
Description |
|
SP-P/O MODE |
Select when there is a full-range speaker connected to |
|
|
[REAR/SUB.W] |
the rear speaker output leads and there is a subwoofer |
|
connected to the RCA output. |
|
|
|
|
|
|
|
|
[SUB.W/SUB.W] |
Select when there is a passive subwoofer connected |
|
|
directly to the rear speaker output leads and there is a |
|
|
subwoofer connected to the RCA output. |
|
|
|
|
[REAR/REAR] |
Select when there are full-range speakers connected to |
|
|
the rear speaker output leads and RCA output. If there is |
|
|
a full-range speaker connected to the rear speaker |
|
|
output leads, and the RCA output is not used, you may |
|
|
select either [REAR/SUB.W] or [REAR/REAR]. |
|
|
|
DIM SETTING |
Change the display brightness. |
|
|
[SYNC CLOCK], |
|
|
[MANUAL] |
|
|
|
|
En 5
English
Menu Item |
Description |
|
SYSTEM RESET |
Select [YES] to initialize the unit settings. The unit will be |
|
[YES], [NO] |
restarted automatically. |
|
(Some of the settings may be retained even after |
||
|
||
|
resetting the unit.) |
|
|
|
Radio
The RDS (radio data system) function only works in areas that broadcast RDS signals for FM stations.
Receiving preset stations
1 Press SRC/OFF to select [RADIO].
2Press BAND/DIMMER to select the band from [FM1], [FM2], [FM3] or [AM].
3 Press a number button (1/ to 6/ ).
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 11).
To seek a station manually
1After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press / .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 11).
To store stations manually
1While receiving the station you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing.
USB/AUX
Playing back
Disconnect headphones from the device before connecting it to the unit.
SRC (source)/OFF |
USB port |
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/ |
to 6/ |
). |
|
|
1 |
After selecting the band, press the M.C. dial to display the main menu. |
|
||
2 |
Turn the M.C. dial to select [FUNCTION], then press to confirm. |
|
|
|
3 |
Turn the M.C. dial to select [BSM], then press to confirm. |
|
M.C. (multi-control) dial |
AUX input jack (3.5 mm stereo jack) |
6 En
USB devices (including Android)
1 Open the USB port cover.
2 Plug in the USB.
NOTE
To automatically switch to [USB] source when a USB device is connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page 12).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
A device installed with Android OS 5.0 or later can be connected to the unit via AOA, using the cable supplied with the device.
Listening to music on Android
This function is compatible with devices that have Android OS 5.0 or later installed and also support AOA (Android Open Accessory) 2.0.
1 Press SRC/OFF to select [ANDROID].
NOTE
Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version.
Basic operations
Purpose |
Operation |
|
|
|
Select a track |
Press |
or |
. |
|
|
|
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
|
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
|
|
AUX
1 Insert the stereo mini plug into the AUX input jack.
2 Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 12).
Operations
You can make various adjustments in the FUNCTION settings (page 11). Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.
Purpose |
Operation |
|
|
|
Select a folder/album* |
Press 1/ |
or 2/ . |
|
|
|
|
|
|
|
Select a track/song (chapter) |
Press |
or |
. |
|
|
|
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
|
|
|
|
||
Search for a file from a list |
1 Press |
to display the list. |
||
|
2 Turn the M.C. dial to select the |
|||
|
desired file (folder) name or |
|||
|
category, then press to confirm. |
|||
|
3 Turn the M.C. dial to select the |
|||
|
desired file, then press to confirm. |
|||
|
Playback starts. |
|
|
|
|
|
|||
View a list of the files in the selected |
Press the M.C. dial when a folder/ |
|||
folder/category* |
category is selected. |
|
||
|
|
|||
Play a song in the selected folder/ |
Press and hold the M.C. dial when a |
|||
category* |
folder/category is selected. |
|
||
|
|
|
|
|
Repeat play |
Press 6/ |
. |
|
|
|
|
|
|
|
Random/shuffle play |
Press 5/ |
. |
|
|
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
|
|
* Compressed audio files only
English
En 7
Bluetooth
Bluetooth connection
1 Turn on the Bluetooth function of the device.
2 Press to display the phone menu.
3 Turn the M.C. dial to select [BT SETTING], then press to confirm.
4Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices.
•To cancel searching, press the M.C. dial.
•If the desired device is not in the list, select [RE-SEARCH].
•If there is no device available, [NOT FOUND] appears in the display.
5Turn the M.C. dial to select a device, then press to confirm.
Press and hold the M.C. dial to switch the displayed device information between the Bluetooth device address and device name.
6 Select [Pioneer BT Unit] shown in the device display.
7Make sure the same 6-digit number appears on this unit and the device, then select “Yes” on the device.
NOTES
•Depending on the device, the PIN code is required in step 7. In this case, input [0000].
•Only one single device can be paired/registered at any one time. The previously paired/ registered phonebook and preset information is overwritten/deleted when a new device is paired/registered to this unit.
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.
Bluetooth settings
Menu Item |
Description |
|
BT CONNECT |
Display the paired Bluetooth devices. “*” appears on the |
|
[ON], [OFF] |
device name when the Bluetooth connection is |
|
established. |
||
|
||
|
|
|
ADD DEVICE |
Register a new device. |
|
|
|
|
A.CONN |
Select [ON] to connect to a Bluetooth device |
|
[ON], [OFF] |
automatically. |
|
|
||
|
|
|
VISIBLE |
Select [ON] so that a Bluetooth device can detect the |
|
[ON], [OFF] |
unit when the unit is connected via Bluetooth to another |
|
device. |
||
|
||
|
|
|
PIN CODE |
Change the PIN code. |
|
|
1 Press the M.C. dial to display the setting mode. |
|
|
2 Turn the M.C. dial to select a number. |
|
|
3 Press the M.C. dial to move the cursor to the next |
|
|
position. |
|
|
4 After inputting the PIN code, press and hold the M.C. |
|
|
dial. |
|
|
After inputting the PIN code, pressing the M.C. dial |
|
|
returns you to the PIN code input display, and you can |
|
|
change the PIN code. |
|
|
|
|
DEV. INFO |
Switch the device information on the display between |
|
|
the device name and Bluetooth device address. |
|
|
|
Bluetooth telephone
First, make a Bluetooth connection with the Bluetooth telephone (page 8).
Important
•Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the vehicle’s battery.
•Be sure to park your vehicle in a safe place and apply the parking brake before operation.
8 En
To make a phone call
1 Press to display the phone menu.
2Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm.
If you select [PHONE BOOK], proceed to step 4.
3Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press to confirm.
4Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1 Press when a call is received.
Basic operations
Purpose |
Operation |
|
|
End a call |
Press |
. |
|
|
|
|
|
Reject an incoming call |
Press and hold |
when a call is received. |
|
|
|
||
Switch between the current |
Press the M.C. dial. |
||
caller and a caller on hold |
|
|
|
|
|
|
|
Cancel a caller on hold |
Press and hold |
. |
|
|
|
||
Adjust the volume of the |
Turn the M.C. dial during the call. |
||
caller’s voice (When private |
|
|
|
mode is on, this function is not |
|
|
|
available.) |
|
|
|
|
|
|
|
Turn the private mode on or |
Press BAND/ |
during the call. |
|
off |
|
|
|
|
|
|
|
2Press and hold one of the number buttons (1/ to 6/ ).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/ to 6/ ), then press the M.C. dial.
Phone menu
Menu Item |
Description |
|
|
RECENTS |
Display the missed call history. |
||
|
[MISSED] |
|
|
|
|
|
|
|
[DIALED] |
Display the dialed call history. |
|
|
|
|
|
|
[RECEIVED] |
Display the received call history. |
|
|
|
||
PHONE BOOK* |
Display the contacts which have been transferred from |
||
|
|
your phone. Set [VISIBLE] in the Bluetooth settings to |
|
|
|
[ON] to browse the contacts via this unit. |
|
|
|
||
PRESET 1-6 |
Recall the preset phone numbers. You can also recall the |
||
|
|
preset phone numbers by pressing one of the number |
|
|
|
buttons (1/ |
to 6/ ). |
|
|
||
A.ANSR |
Select [ON] to answer an incoming call automatically. |
||
|
[ON], [OFF] |
|
|
|
|
||
R.TONE |
Select [ON] if the ring tone does not come out from the |
||
|
[ON], [OFF] |
car speakers. Depending on the connected phone, this |
|
|
function may not work. |
||
|
|
||
|
|
||
PB INVT |
Invert the order of names in the phone book (name |
||
|
|
view). |
|
|
|
|
|
English
To preset phone numbers
1 Select a phone number from a phone book or call history.
En 9
Menu Item |
Description |
|
PB A.SYNC |
Select whether or not to transfer the contacts from your |
|
[ON], [OFF] |
phone automatically when your phone is connected to |
|
the unit. |
||
|
||
|
• When connected for the first time, the contacts from |
|
|
your phone are transferred automatically, regardless of |
|
|
the [PB A.SYNC] setting. |
|
|
• If you switch from [ON] to [OFF], the auto |
|
|
synchronization will not be performed on the next |
|
|
connection. |
|
|
• If you switch from [OFF] to [ON], the auto |
|
|
synchronization will be performed when your phone is |
|
|
connected to the unit. |
|
|
• During the auto synchronization, you cannot cancel |
|
|
the synchronization, even if you select [OFF]. |
|
|
|
|
BT SETTING |
You can adjust various settings for Bluetooth |
|
|
connections. For details on Bluetooth settings, see |
|
|
page 8. |
|
|
|
*The contacts on your phone will normally be transferred automatically when the phone is connected. If they are not, use your phone to transfer the contacts.
Bluetooth audio
Important
•Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels:
–A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
–AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select song, etc.
•The sound of the Bluetooth audio player will be muted when the phone is in use.
•When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone automatically.
•Depending on the type of Bluetooth audio player you have connected to this unit, operation and information displayed may vary based on availability and functionality.
1 Make a Bluetooth connection with the Bluetooth audio player.
10En
2 Press SRC/OFF to select [BT AUDIO] as the source.
3 Press BAND/ to start playback.
Basic operations
You can make various adjustments in the FUNCTION settings (page 11).
Purpose |
Operation |
|
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
||
|
|
|
|
|
|
Select a track |
Press |
or |
. |
|
|
|
|
|
|
|
|
Repeat play* |
Press 6/ |
. |
|
|
|
|
|
|
|
|
|
Random play* |
Press 5/ |
. |
|
|
|
|
|
|
|
||
Pause/resume playback |
Press 4/PAUSE. |
|
|
||
|
|
|
|
|
|
Search for a file from a list |
1 |
Press |
to display a list. |
|
|
|
2 |
Turn the M.C. dial to select the |
|||
|
|
desired folder name, then press to |
|||
|
|
confirm. |
|
|
|
|
3 |
Turn the M.C. dial to select the |
|||
|
|
desired file, then press to confirm. |
|||
|
Playback starts. |
|
|
||
|
|
|
|
|
|
* Depending on the connected device, these operations may not be available.
Settings
You can adjust various settings in the main menu.
1 Press the M.C. dial to display the main menu.
2Turn the M.C. dial to select one of the categories below, then press to confirm.
•FUNCTION settings (page 11)
•AUDIO settings (page 11)
•SYSTEM settings (page 12)
3 Turn the M.C. dial to select the options, then press to confirm.
FUNCTION settings
The menu items vary according to the source.
Menu Item |
Description |
|
|
|
||||||
BSM |
|
|
|
|
|
|
Store the six strongest stations on the |
|||
|
||||||||||
|
||||||||||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
number buttons (1/ |
to 6/ |
) |
|
|
|
|
|
|
|
|
automatically. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LOCAL |
|
|
|
|
|
|
||||
|
|
|
|
|
||||||
|
|
|
|
|
||||||
FM: [OFF], [LV1], [LV2], [LV3], |
Restrict the tuning station according to the |
|||||||||
[LV4] |
signal strength. |
|
|
|||||||
AM: [OFF], [LV1], [LV2] |
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
SEEK |
|
|
|
|
|
|
||||
|
|
|
|
|
||||||
|
|
|
|
|
||||||
[MAN], [PCH] |
Assign |
or |
buttons to seek the |
|||||||
|
|
|
|
|
|
|
stations one by one (manual tuning) or |
|||
|
|
|
|
|
|
|
select a station from the preset channels. |
PLAY
Start playback.
STOP
Stop playback.
AUDIO settings
Menu Item |
Description |
|
|
FADER*1
Adjust the front and rear speaker balance.
Menu Item |
Description |
BALANCE |
|
|
Adjust the left and right speaker balance. |
|
|
EQ SETTING |
|
[SUPER BASS], [POWERFUL], |
Select the equalizer setting. |
[NATURAL], [VOCAL], |
|
[CUSTOM1], [CUSTOM2], |
|
[FLAT] |
|
Select an equalizer band and |
|
level for further customizing. |
|
Equalizer band: [80HZ], |
|
[250HZ], [800HZ], [2.5KHZ], |
|
[8KHZ] |
|
Equalizer level: [+6] to [–6] |
|
|
|
LOUDNESS |
|
[OFF], [LOW], [MID], [HI] |
Compensate for clear sound at low volume. |
|
|
SUB.W*2 |
|
[NOR], [REV], [OFF] |
Select the subwoofer phase. |
|
|
SUB.W CTRL*2*3 |
|
Cut-off frequency: [50HZ], [63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ]
Output level: [–24] to [+6] Slope level: [–12], [–24]
Only frequencies lower than those in the selected range are output from the subwoofer.
BASS BOOST |
|
|
[0] to [+6] |
Select the bass boost level. |
|
|
|
|
HPF SETTING |
|
|
Cut-off frequency: [OFF], |
Only frequencies higher than the high-pass |
|
[50HZ], [63HZ], [80HZ], |
filter (HPF) cutoff are output from the |
|
[100HZ], [125HZ], [160HZ], |
speakers. |
|
[200HZ] |
|
|
Slope level: [–12], [–24] |
|
|
|
|
|
|
En 11 |
English
Menu Item |
Description |
SLA |
|
[+4] to [–4] |
Adjust the volume level for each source |
|
except RADIO. |
|
|
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).
*3 Not available when [OFF] is selected in [SUB.W].
SYSTEM settings
You can also access to these menus when the unit is turned off.
Menu Item |
Description |
CLOCK SET |
|
|
Set the clock (page 5). |
|
|
12H/24H |
|
[12H], [24H] |
Select the time notation. |
|
|
AUX |
|
[ON], [OFF] |
Set to [ON] when using an auxiliary device |
|
connected to the unit. |
|
|
BT AUDIO |
|
[ON], [OFF] |
Set the Bluetooth signal on/off. |
|
|
BT MEM CLEAR |
|
[YES], [NO] |
Clear the Bluetooth device data (device |
|
information, PIN code, call history, phone |
|
book, preset phone numbers) stored in the |
|
unit. |
|
[CLEARED] appears when data is |
|
successfully deleted. |
|
|
Menu Item |
Description |
BT VERSION |
|
|
Displays the system version of the unit and |
|
the Bluetooth module. |
|
|
USB AUTO |
|
[ON], [OFF] |
Select [ON] to automatically switch to |
|
[USB] source when a USB device/Android is |
|
connected to the unit. |
|
Select [OFF] when a USB device/Android is |
|
being connected to the unit just for |
|
charging. |
|
|
12En
Connections/Installation
Connections
WARNING
•Use speakers over 50 W (output value) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit.
•The black cable is ground. When installing this unit or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car’s body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire, generation of smoke or malfunction.
Ground wire |
POWER AMP |
||
|
|
|
|
|
|
|
|
Other devices (Another electronic
Metal parts of
device in the car)
car’s body
*1 Not supplied for this unit
Important
•When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain.
ACC position |
No ACC position |
•Use of this unit in conditions other than the following could result in fire or malfunction.
–Vehicles with a 12-volt battery and negative grounding.
–When speaker output is used by 4 channels, use speakers over 50 W (maximum input power) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit.
–When rear speaker output is used by 2 Ω of subwoofer, use speakers over 70 W (maximum input power). * Please refer to connection for a connection method.
•To prevent a short-circuit, overheating or malfunction, be sure to follow the directions below.
–Disconnect the negative terminal of the battery before installation.
–Secure the wiring with cable clamps or adhesive tape. Wrap
adhesive tape around wiring that comes into contact with metal parts to protect the wiring.
–Place all cables away from moving parts, such as the shift lever and seat rails.
–Place all cables away from hot places, such as near the heater outlet.
–Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment.
–Cover any disconnected cable connectors with insulating tape.
–Do not shorten any cables.
–Never cut the insulation of the power cable of this unit in order to share the power with other devices. The current capacity of the cable is limited.
–Use a fuse of the rating prescribed.
–Never wire the negative speaker cable directly to ground.
–Never band together negative cables of multiple speakers.
•When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle’s autoantenna relay control terminal (max. 300mA 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal.
•Never connect the blue/white cable to the power terminal of an external power amp. Also, never connect it to
the power terminal of the auto |
|
antenna. Doing so may result in |
|
battery drain or a malfunction. |
|
• The black cable is ground. Ground |
English |
cables for this unit and other |
|
equipment (especially, high-current |
|
products such as power amps) must |
|
be wired separately. If they are not, |
|
an accidental detachment may result |
|
in a fire or malfunction. |
|
This unit
Rear output or subwoofer output
Antenna input
Power cord input
Fuse (10 A)
Microphone input Microphone 3 m (9 ft. 10-1/8 in.)
Power cord
Perform these connections when not connecting a rear speaker lead to a subwoofer.
En 13
Perform these connections when using a subwoofer without the optional amplifier.
To power cord input
Left
Right
Front speaker
Rear speaker
White
White/black
Gray
Gray/black
Green
14En
Green/black
Violet
Violet/black
Black (chassis ground) Connect to a clean, paint-free metal location.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by the ignition switch (12 V DC).
Blue/white
Connect to the system control terminal of the power amp or autoantenna relay control terminal (max. 300 mA 12 V DC).
Subwoofer (4 Ω)
When using a subwoofer of 2 Ω, be sure to connect the subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/black leads.
Not used. Subwoofer (4 Ω) × 2
NOTE
Change the initial menu of this unit. Refer to [SP-P/O MODE] (page 5). The subwoofer output of this unit is monaural.
Power amp (sold separately)
Perform these connections when using the optional amplifier.
System remote control Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold separately)
To rear output or subwoofer output Rear speaker or subwoofer
Installation
Important
•Check all connections and systems before final installation.
•Do not use unauthorized parts as this may cause malfunctions.
•Consult your dealer if installation requires drilling of holes or other modifications to the vehicle.
•Do not install this unit where:
–it may interfere with operation of the vehicle.
–it may cause injury to a passenger as a result of a sudden stop.
•Optimum
performance is obtained when the unit is installed at an angle of less than 60°.
•When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any
loose cables so they are not blocking the vents.
Leave ample 5 cm space
5 cm
DIN mount installation
1Insert the supplied mounting sleeve into the dashboard.
2Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.
Dashboard
Mounting sleeve
•Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions.
When not using the supplied mounting sleeve
1Line up the holes on the mounting bracket with the holes on the sides of the unit to attach the bracket.
2Screw in one screw on each side to hold the unit in place.
Tapping screw (φ5 mm × 9 mm)
Mounting bracket Dashboard or console
Using the included bracket
Check to make sure that the included bracket matches your particular model of vehicle and then attach it to the unit as shown below.
Screw
Bracket
Removing the unit (installed with the supplied mounting sleeve)
1 Remove the trim ring.
Trim ring
Notched tab
•Releasing the front panel allows easier access to the trim ring.
•When reattaching the trim ring, point the side with the notched tab down.
2Insert the supplied extraction keys into both sides of the unit until they click into place.
3 Pull the unit out of the dashboard.
To secure the front panel
The front panel can be secured with the supplied screw.
Screw
Installing the microphone
•Install the microphone in a place where its direction and distance from the driver make it easiest to pick up the driver’s voice.
•Be sure to turn off (ACC OFF) the product before connecting the microphone.
Mounting on the sun visor
1Fit the microphone into the microphone clip.
English
Microphone
Microphone clip
2Mount the microphone clip to the sun visor.
Microphone clip
Clamps
Use separately sold clamps to secure the lead where necessary inside the vehicle.
Install the microphone on the sun visor when it is in the up position. It cannot recognize the driver’s voice if the sun visor is in the down position.
En 15
Installation on the steering column
1Fit the microphone into the Microphone Base.
Microphone Microphone base with double-sided tape
2Attach the microphone on the steering column.
Microphone Base
Clamps
Use separately sold clamps to secure the lead where necessary inside the vehicle.
3Keeping it away from the steering wheel.
16En
Additional Information
Troubleshooting
The display automatically returns to the normal display.
→No operations have been made for about 30 seconds.
– Perform an operation.
The repeat play range changes unexpectedly.
→Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing.
–Select the repeat play range again.
A subfolder is not played back.
→Subfolders cannot be played when [FLD] (folder repeat) is selected.
– Select another repeat play range.
The sound is intermittent.
→You are using a device, such as a cellular phone, that may cause audible interference.
–Move electrical devices that may be causing the interference away from the unit.
The sound from the Bluetooth audio source is not played back.
→There is a call in progress on a Bluetooth-connected cellular phone.
–The sound will be played back when the call is terminated.
→A Bluetooth-connected cellular phone is currently being operated.
–Stop using the cellular phone.
→The connection between the unit and the cellular phone is not established correctly after a call made by a Bluetooth-connected cellular phone.
–Make a Bluetooth connection between the unit and the cellular phone again.
Error messages
Common
AMP ERROR
→This unit fails to operate or the speaker connection is incorrect.
→The protective circuit is activated.
–Check the speaker connection.
–Turn the ignition switch OFF and back to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance.
NO XXXX (NO TITLE, for example)
→There is no embedded text information.
–Switch the display or play another track/file.
USB device
FORMAT READ
→Sometimes there is a delay between the start of playback and when you start to hear any sound.
–Wait until the message disappears and you hear sound.
NO AUDIO
→There are no songs.
–Transfer the audio files to the USB device and connect.
→The connected USB device has security enabled.
–Follow the USB device instructions to disable the security.
SKIPPED
→The connected USB device contains DRM protected files.
– The protected files are skipped.
PROTECT
→All the files on the connected USB device are embedded with DRM.
– Replace the USB device.
N/A USB
→The connected USB device is not supported by this unit.
–Disconnect your device and replace it with a compatible USB device.
HUB ERROR
→The USB device connected via a USB hub is not supported by this unit.
–Connect the USB device directly to this unit using a USB cable.
CHECK USB
→The USB connector or USB cable has short-circuited.
–Check that the USB connector or USB cable is not caught in something or damaged.
→The connected USB device consumes more than maximum allowable current.
–Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices.
ERROR-19
→Communication failed.
–Perform one of the following operations, then return to the USB source.
•Turn the ignition switch OFF and back to ON.
•Disconnect the USB device.
•Change to a different source.
ERROR-23
→USB device was not formatted properly.
–Format the USB device with FAT12, FAT16 or FAT32.
STOP
→There are no songs in the current list.
– Select a list that contains songs.
Bluetooth device
ERROR-10
→The power failed for the Bluetooth module of the unit.
–Turn the ignition switch OFF and back to ACC or ON.
Handling guidelines
USB storage device
•Connections via USB hubs are not supported.
•Firmly secure the USB storage device before driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or accelerator pedal.
•Depending on the USB storage device, the following problems may occur.
–Operations may vary.
–The storage device may not be recognized.
–Files may not be played back properly.
–The device may cause audible interference when you are listening to the radio.
•The unit may not work properly depending on the application used to encode WMA files.
•There may be a slight delay at the start of the playback of audio files embedded with image data, or audio files stored on a USB device with numerous folder hierarchies.
•Russian text to be displayed on this unit should be encoded in one of the following character sets:
–Unicode (UTF-8, UTF-16)
–A character set other than Unicode that is used in a Windows environment and is set to Russian in the multi-language setting
CAUTION
•Pioneer cannot guarantee compatibility with all USB mass storage devices, and assumes no responsibility for any loss of data on media players, smartphones, or other devices while using this product.
•Do not leave a USB storage device in any place that is subject to high temperatures.
English
Compressed audio compatibility
•Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name.
En 17
WMA files
File extension |
.wma |
Bit rate |
48 kbps to 320 kbps |
|
(CBR), 48 kbps to |
|
384 kbps (VBR) |
|
|
Sampling |
32 kHz, 44.1 kHz, 48 |
frequency |
kHz |
|
|
Windows Media™ |
Not compatible |
Audio Professional, |
|
Lossless, Voice/ |
|
DRM Stream/ |
|
Stream with video |
|
|
|
MP3 files
File extension |
.mp3 |
Bit rate |
8 kbps to 320 kbps |
|
(CBR), VBR |
|
|
Sampling |
16 kHz to 48 kHz (32 |
frequency |
kHz, 44.1 kHz, 48 |
|
kHz for emphasis) |
|
|
Compatible ID3 tag |
2.2, 2.3, 2.4 |
version |
|
|
|
M3u playlist |
Not compatible |
|
|
MP3i (MP3 |
Not compatible |
interactive), mp3 |
|
PRO |
|
|
|
WAV files
File extension |
.wav |
Quantization bits |
8 and 16 (LPCM), 4 |
|
(MSADPCM) |
|
|
Sampling |
16 kHz to 48 kHz |
frequency |
(LPCM), 22.05 kHz |
|
and 44.1 kHz (MS |
|
ADPCM) |
|
|
18En
FLAC files
•FLAC files may not be playable, depending on the encoder.
File extension |
.flac |
Sampling |
8/11.025/12/16/ |
frequency |
22.05/24/32/44.1/ |
|
48 kHz |
Quantization bit |
16 bit |
rate |
|
|
|
Channel mode |
1/2 ch |
|
|
USB device
•There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies.
Playable folder |
Up to eight tiers (A |
hierarchy |
practical hierarchy |
|
is less than two |
|
tiers.) |
|
|
Playable folders |
Up to 500 |
|
|
Playable files |
Up to 15 000 |
|
|
Playback of |
Not compatible |
copyright- |
|
protected files |
|
|
|
Partitioned USB |
Only the first |
device |
partition can be |
|
played. |
|
|
Sequence of audio files
The user cannot assign folder numbers and specify playback sequences with this unit. Sequence of audio file depends on the connected device.
Note that the hidden files in a USB device cannot be played back.
Example of a hierarchy
Folder
Compressed |
audio file |
01 to 05: Folder number
to : Playback sequence
Copyright and trademark
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners.
WMA
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/ or other countries.
This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
FLAC
Copyright © 2000-2009 Josh Coalson Copyright © 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
–Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
–Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
–Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,