WV-Q204
Before attempting to mount this product,
please read these instructions carefully and save this manual for future use.
Rack Mount Bracket
These Rack Mounting Brackets are used for mounting such as the WJ-NT104, etc.
Model No. WV -Q204/1
WV -Q204/2
INSTALLATIONS
The installation described below should be made by qualified service personnel or system installers.
■ Mounting in a Rack
WV-Q204/1 can mount the WJ-NT104 on the rack.
WV-Q204/2 can mount side by side up to two WJ-NT104s on the rack.
Illustrations as shown below are examples to install WJ-NT104 and WJ-NT104s.
Rubber feet
Rack mounting
bracket (small)
Rack mounting
bracket (large)
1. Remove the four rubber feet by removing the four screws from the bottom of the WJ-NT104.
● Mounting one WJ-NT104 with the WV-Q204/1
2. Fix the mounting brackets (large and small) on both sides of the WJ-NT104 with the eight supplied screws (M3x8) as
shown below.
Loading...