Quick Setup Guide
KX-HNC800/KX-HN1003
Home Monitoring Camera
1Prepare the camera.
Plug in the camera and wait about 1 minute for the camera’s LED to light in green.
4When prompted, press the [SETUP] button on the back of the camera.
The LED indicator on the camera will begin blinking in green.
2Download the HomeHawk app, then tap its icon to start the app. https://panasonic.net/cns/pcc/support/homehawk
iPhone: Search for “Panasonic HomeHawk”. iPad: Search for “Panasonic HomeHawk” in the “iPhone only” category.
Android: Search for “Panasonic HomeHawk”.
3Follow the on-screen instructions. When prompted, tap [Indoor HD Camera] → [Set up the HD Camera].
5 |
|
|
|
|
|
|
|
|
|
iPhone/iPad |
Android users: Skip this step |
|||
5.1Press the home button on your mobile device to close the HomeHawk app.
5.2Change your mobile device’s wireless LAN setting.
Open the [Settings] app, tap [Wi-Fi], select “KX-HNC800_Panasonic”, enter “00000000” as the password, and then tap [Join].
5.3Start the HomeHawk app again.
6If prompted, enter the password for your wireless router and then tap [Next].
7When prompted, press the [SETUP] button on the back of the camera.
8Follow the on-screen instructions and set the camera’s login password.
This password will be required in order to access the camera.
9Follow the on-screen instructions and complete the setup.
A list of all cameras registered to the app is displayed.
10 Enjoy your HD camera!
|
Printed in China |
|
Support page |
https://panasonic.net/cns/pcc/support/homehawk |
|
|
PNQW5543YA |
CC1217YK1038 |
|||
|
Panasonic Support Site: |
http://shop.panasonic.com/support |
|||
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Loading...