Loading...
Installation Guide
Home Network System
Motion Sensor
Model No. KX-HNS102AZ
Thank you for purchasing a Panasonic product.
This document explains how to install the motion sensor properly. For details about how to use the system, refer to the User’s Guide (page 15).
Please read this document before using the unit and save it for future reference.
Table of Contents
Introduction |
|
Accessory information ............... |
3 |
Important Information |
|
About this system ...................... |
4 |
For your safety ........................... |
4 |
Important safety instructions ...... |
5 |
For best performance ................ |
5 |
Other information ....................... |
6 |
Setup |
|
Part names and functions .......... |
7 |
LED indicator ............................. |
7 |
Setup overview .......................... |
7 |
Inserting the batteries ................ |
8 |
Registering the motion |
|
sensor ........................................ |
8 |
Information about sensor |
|
features ...................................... |
9 |
Confirming the usage area ...... |
11 |
Wall mounting .......................... |
12 |
Appendix |
|
Testing the motion sensor ....... |
15 |
Adjusting the sensor |
|
sensitivity ................................. |
15 |
Features available when using the |
|
[Home Network] app ................ |
15 |
Accessing the User’s Guide .... |
15 |
Specifications .......................... |
16 |
Warranty (for New Zealand) .... |
17 |
2
|
|
Introduction |
|
|
|
|
|
|
|
|
|
Accessory information |
|
|
|
|
|
|
|
Supplied accessories |
|
|
|
No. |
Accessory item/Part number |
|
Quantity |
A |
Batteries*1 |
|
2 |
B |
Wall mounting adaptor*2 |
|
1 |
C |
Wall mounting screws (25 mm) |
|
2 |
*1 When replacing batteries, see “Power source” of “Specifications”, page 16 for battery information.
*2 The motion sensor can be wall mounted with or without the wall mounting adaptor (page 12).
A 
B 
C
Other information
RDesign and specifications are subject to change without notice.
RThe illustrations in these instructions may vary slightly from the actual product.
Trademarks
RiPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
RAndroid is a trademark of Google Inc.
RMicrosoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
RAll other trademarks identified herein are the property of their respective owners.
3
Important Information
About this system
RThis system is an auxiliary system; it is not designed to provide complete protection from property loss.
Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.
RThe system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed. Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure.
For your safety
To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
RUse only the power source marked on the product.
RDo not connect non-specified devices.
Installation
RTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.
RDo not place or use this product near automatically controlled
devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
RKeep small parts (screws, etc.) out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.
RIt is advised not to use the equipment at a refuelling point. Users are reminded to observe restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress.
Operating safeguards
R Do not disassemble the product.
Medical
RConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.88 GHz and 1.90 GHz with a peak transmission power of 250 mW.
RDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
4
Important Information
CAUTION
Battery
RThe batteries should be used correctly, otherwise the product may be damaged due to battery leakage.
RDo not charge, short-circuit, disassemble, or heat the batteries.
RDo not dispose of batteries in a fire.
RRemove all the batteries when replacing.
RDo not mix old, new or different types of batteries.
RIt is recommended that batteries are replaced annually.
RKeep out of the reach of small children. There is a risk of swallowing. If the battery is swallowed, seek medical attention immediately.
RRemove the battery if it becomes unusable. There is a risk of leakage, overheating, and rupture. Do not attempt to use a battery if it is leaking.
RDo not intentionally pour water on the battery or allow it to get wet. There is a risk of fire and smoke. If the battery becomes wet, remove it immediately and contact an authorised service centre.
Important safety instructions
When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Do not use this product near water for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2.Use only the batteries indicated in this document. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Hub location/avoiding noise
The hub and other compatible Panasonic devices use radio waves to communicate with each other.
RFor maximum coverage and noise-free communications, place your hub:
–at a convenient, high, and central location with no obstructions between the product and hub in an indoor environment.
–away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.
–facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the hub on a bay window or near a window.)
RIf the reception for a hub location is not satisfactory, move the hub to another location for better reception.
Environment
RKeep the product away from electrical noise generating devices,
5
Important Information
such as fluorescent lamps and motors.
RThe product should be kept free from excessive smoke, dust, high temperature, and vibration.
RThe product should not be exposed to direct sunlight.
RDo not place heavy objects on top of the product.
RThe product should be kept away from heat sources such as radiators, cookers, etc. It should not be placed in rooms where the temperature is less than 0 °C or greater than 40 °C. Damp basements should also be avoided.
ROperating the product near electrical appliances may cause interference. Move away from the electrical appliances.
Other information
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Routine care
RWipe the outer surface of the product with a soft moist cloth.
RDo not use benzine, thinner, or any abrasive powder.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery removal procedure
Refer to “Inserting the batteries” on page 8.
6
Loading...