Panasonic CS-HE7QKD, CS-HE9QKD, CS-HE12QKD, CS-HE18QKD, CU-HE7QKD User Manual [ru]

Operating Instructions

Air Conditioner

Model No.

Indoor Unit

CS-HE7QKD CS-HE9QKD CS-HE12QKD CS-HE18QKD

Outdoor Unit

CU-HE7QKD CU-HE9QKD CU-HE12QKD CU-HE18QKD

	Operating Instructions	2-12
	Air Conditioner

Thank you for purchasing Panasonic Air Conditioner. Installation instructions attached.

Before operating the unit, read these operating instructions thoroughly and keep them for future reference.

English

	Инструкции по эксплуатации	13-26
	Кондиционер воздуха

Благодарим вас за приобретение кондиционера

Panasonic.

Инструкции по монтажу прилагаются.

Перед началом эксплуатации данного устройства внимательно прочитайте инструкции по эксплуатации и сохраните их.

	Інструкція з експлуатації	27-38
	Кондиціонер

Дякуємо за придбання кондиціонера компанії

Panasonic.

Інструкції зі встановлення додаються. Уважно прочитайте цю інструкцію перед

експлуатацією кондиціонера і збережіть її для довідок у майбутньому.

	Пайдалану нұсқаулары	39-51
	Ауа желдеткіші

Panasonic ауа желдеткішін сатып алғаныңыз үшін рақмет.

Орнату нұсқаулары бірге беріледі. Құрылғыны пайдаланбас бұрын осы пайдалану

нұсқауларын мұқият оқыңыз жəне оларды болашақ анықтамалық үшін сақтап қойыңыз.

Руccкий

Українська

Қазақша

F569737

Provide maximum comfort,

clean air and optimise energy saving

ECONAVI and AUTO COMFORT

Equipped with the human activity sensor, the air conditioner ensures to deliver cool or warm air to you, and keeps the room consistently comfortable with minimum energy consumption.

Furthermore, the sunlight sensor detects the sunlight intensity and helps control heating/cooling temperatures to provide optimum comfort.

See “To learn more...” for details.

nanoe-G

Deactivates harmful micro-organisms such as viruses, bacteria, etc. to keep air clean. It also deactivates viruses and bacteria on the filter to keep inside of the unit clean.

2

Quick guide

1

2

3

Inserting the batteries

1Pull out the back cover of remote control

2Insert AAA or R03 batteries (can be used ~ 1 year)

3Close the cover

	2	3	Clock setting
TIMER			1	Press CLOCK
ON		SET
1	2	3	2	Set the time
OFF		CANCEL	3	Confirm
1		AC RC
SET CHECK CLOCK		RESET

Basic operation

	AUTO	FAN
	HEAT	SPEED
	COOL
	DRY	AIR
	MILD	SWING
	DRY
2	ECONAVI	AUTO
		COMFORT
3		NANOE-G
1	MILD DRY
	COOLING
	POWERFUL/	AIR SWING
	QUIET FAN SPEED
	TIMER
	ON	SET
	2	3
	OFF	CANCEL
	AC RC
	SET CHECK CLOCK	RESET

8m

1 Select the desired mode

AUTO HEAT DRY COOL

2 Start/stop the operation

POWER

•Please note that the OFF indication is on to start.

3Select the desired temperature

•Selection range: 16 °C ~ 30 °C.

•Operating the unit within the recommended temperature may save energy.

HEAT : 20 °C ~ 24 °C. COOL: 26 °C ~ 28 °C.

DRY : 1 °C ~ 2 °C lower than room temperature.

•To dim or restore the unit’s indicator brightness, press and hold for 5 seconds.

•Use remote control within 8 m from the remote control receiver of the indoor unit.

The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subject to change without notice for future improvement.

Table of contents
Safety precautions...................	4-5
How to use...............................	6-7
To learn more... ......................	8-9
Cleaning instructions ................	10
Troubleshooting .......................	11
Information................................	12

Accessories

•Remote control

•AAA or R03 batteries × 2

•Remote control holder

•Screws for remote control holder × 2

English

3

Safety precautions

To prevent personal injury, injury to others or property damage, please comply with the following:

Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below:

This sign warns of WARNING death or serious

injury.

This sign warns of CAUTION injury or damage to

property.

The instructions to be followed are classified by the following symbols:

This symbol denotes an action that is PROHIBITED.

These symbols denote actions COMPULSORY.

Power supply

Indoor unit Air inlet

Air outlet

Remote control

Air inlet

Outdoor unit Air outlet

WARNING

Indoor unit and outdoor unit

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Please consult authorised dealer or specialist to clean the internal parts, repair, install, remove and reinstall the unit. Improper installation and handling will cause leakage, electric shock or fire.

Confirm with authorised dealer or specialist on usage of any specified refrigerant type.

Using refrigerant type other than the specified may cause product damage, burst and injury etc.

Do not install the unit in a potentially explosive or flammable atmosphere. Failure to do so could result in fire.

Do not insert your fingers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury.

Do not touch the outdoor unit during lightning, it may cause electric shock.

Do not expose yourself directly to cold air for a long period to avoid excess cooling.

Do not sit or step on the unit, you may fall down accidentally.

Remote control

Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries.

Power supply

Do not use a modified cord, joint cord, extension cord or unspecified cord to prevent overheating and fire.

4

To prevent overheating, fire or electric shock:

•Do not share the same power outlet with other equipment.

•Do not operate with wet hands.

•Do not over bend the power supply cord.

•Do not operate or stop the unit by inserting or pulling out the power plug.

If the supply cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid a hazard.

It is strongly recommended to be installed with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) to prevent electric shock or fire.

To prevent overheating, fire or electric shock:

•Insert the power plug properly.

•Dust on the power plug should be periodically wiped with a dry cloth.

Stop using the product if any abnormality/ failure occurs and disconnect the power plug or turn off the power switch and breaker.

(Risk of smoke/fire/electric shock) Examples of abnormality/failure

•The ELCB trips frequently.

•Burning smell is observed.

•Abnormal noise or vibration of the unit is observed.

•Water leaks from the indoor unit.

•Power cord or plug becomes abnormally hot.

•Fan speed cannot be controlled.

•The unit stops running immediately even if it is switched on for operation.

•The fan does not stop even if the operation

is stopped.

Contact your local dealer immediately for maintenance/repair.

This equipment must be earthed to prevent electrical shock or fire.

Prevent electric shock by switching off the

power supply and unplug:

- Before cleaning or servicing, - When extended non-use, or

- During abnormally strong lightning activity.

CAUTION

Indoor unit and outdoor unit

Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit.

Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. This may cause quality deterioration, etc.

Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation.

Do not expose plants or pet directly to airflow to avoid injury, etc.

Do not touch the sharp aluminium fin, sharp parts may cause injury.

Do not switch ON the indoor unit when waxing the floor. After waxing, aerate the room properly before operating the unit.

Do not install the unit in oily and smoky areas to prevent damage to the unit.

	Do not dismantle the unit for cleaning purpose		precautions
	to avoid injury.
	Do not place a vase or water container on the
	Do not step onto an unstable bench when
	cleaning the unit to avoid injury.
	unit. Water may enter the unit and degrade		Safety
	shock.
	the insulation. This may cause an electric
	Do not open window or door for long time
	during COOL/DRY mode operation.
	Prevent water leakage by ensuring drainage		English
	- Kept clear of gutters and containers, or
	pipe is:
	- Connected properly,
	- Not immersed in water
	After a long period of use or use with any
	combustible equipment, aerate the room
	regularly.
	After a long period of use, make sure the
	installation rack does not deteriorate to
	prevent the unit from falling down.

Remote control

Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control.

To prevent malfunction or damage of the remote control:

•Remove the batteries if the unit is not going to be used for a long period of time.

•New batteries of the same type must be inserted following the polarity stated.

Power supply

Do not disconnect the plug by pulling the cord to prevent electric shock.

5

How to use

POWER TIMER AUTO COMFORT NANOE-G POWERFUL QUIET

(Green)

(Orange)

(Green)

(Blue)

(Orange)

(Orange)

(Green)

Indicator

ECONAVI

To optimise energy saving

MODE

To select operation mode

AUTO - For your convenience HEAT - To enjoy warm air COOL - To enjoy cool air

DRY - To dehumidify the environment

MILD DRY

COOLING To improve humidity and moisture level

•This operation reduces air dryness and provides you with a comfortable living environment during COOL mode only.

•When vertical airflow direction is set to AUTO, it stops at lower position to avoid cold air contact. However, you can adjust the louver direction manually.

POWERFUL/ To switch between

QUIET

powerful & quiet

POWERFUL QUIET NORMAL

POWERFUL: To reach temperature quickly

POWERFUL

Remote control display				Human activity
				sensor
				Sunlight sensor and
				remote control receiver

OFF/ON

TEMP

TIMER

ON

SET

1

2

3

OFF

CANCEL

CHECK CLOCK

Press and hold for approximately

10 seconds to show temperature setting in °C or °F.

Press to restore the remote control to default setting.

Not used in normal operations.

FAN SPEED To select fan speed

•This operation stops automatically after 20 minutes.

QUIET: To enjoy quiet operation

QUIET

• This operation reduces airflow noise.

(Remote control display)

•For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.

Auto OFF/ON button

AUTO

OFF/ON

Use when remote control is a malfunction occurs. Raise the front panel:

1.Press the button once to use in AUTO mode.

2.Press and hold the button until you hear 1 beep, then release to use in forced COOL mode.

3.Repeat step 2. Press and hold the button until you hear 2 beeps, then release to use in normal COOL mode.

4.Repeat step 3. Press and hold the button until you hear 3 beeps, then release to use in forced HEAT mode.

• Press the button again to turn off.

6

See "To learn more..." for details.

AUTO

COMFORT To maximise comfort

AUTO COMFORT

NANOE-G To purify the air

NANOE-G

•nanoe-G starts automatically when the unit is turned on with OFF/ON.

•Can be activated even when the unit is turned off. In this condition, the unit will operate as a fan with AUTO fan speed and louver swing.

To deactivate viruses/bacteria on the filter

NANOE-G POWER

•After the unit is turned off, the nanoe-G in-filter deactivation may activate up to 150 minutes. Turning on the unit cancels this operation.

•To disable this operation in the future, press and

NANOE-G

hold until a short beep sound is heard. This will not disable the nanoe-G to purify the air.

• To restore the nanoe-G in-filter deactivation,

NANOE-G

press and hold until a long beep sound is heard.

AIR SWING To adjust airflow direction

(Remote control display)

•Keeps the room ventilated.

•In COOL/DRY mode, if AUTO is set, the louver swings left/right and up/down automatically.

•In HEAT mode, if AUTO is set, the horizontal louver is fixed at the predetermined position. The vertical louver swings left/right after the temperature rises.

•Do not adjust the louver by hand.

To set the timer

2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times.

	1	2	3
	TIMER
	ON		SET
	1	2	3
	OFF		CANCEL
1	Select ON or OFF			Example:
	timer			OFF at 22:00
	• Each time pressed:			OFF
			Cancel
2	Set the time
				2
3	Confirm			SET

TIMER

• To cancel ON or OFF timer, press ON or OFF

to select respective or then press .

CANCEL

•If timer is cancelled manually or due to power failure, you can restore the timer again by

pressing ON or OFF to select respective or then press SET .

•The nearest timer setting will be displayed and will activate in sequence.

•When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.

•Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Quick guide.

English How to use

Note

	POWERFUL/	AUTO		POWERFUL/	AUTO
ECONAVI	QUIET	COMFORT	NANOE-G	ECONAVI QUIET	COMFORT
,		,	,	,	,
• Can be activated in all modes and can be				• Cannot be selected at the same time.
cancelled by pressing the respective button				• Cannot be activated during MILD DRY COOLING.
again.

7

To learn more...

Operation mode

AUTO : During operation mode selection the POWER indicator blinks.

• Unit selects operation mode every 10 minutes according to setting temperature and room temperature. HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation.

COOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode. DRY : Unit operates at low fan speed to give a gentle cooling operation.

nanoe-G in-filter deactivation

Depending on the unit’s accumulated operation time, nanoe-G in-filter deactivation may activate only once a day after the unit turned off.

To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened slightly. This process only applicable when the unit is operated in COOL/DRY mode before turned off.Then, nanoe-G deactivates viruses/bacteria on the filter for 2 hours with fan stopped and louver closed.

Do not turn off the power supply during this operation. After power failure, this operation will not resume.

ECONAVI and AUTO COMFORT

	ECONAVI		AUTO		Note
		or	COMFORT
					AIR SWING When manual AIR SWING is selected,
	The unit will start to initialise			The human activity sensor	the ECONAVI and AUTO COMFORT
					operations will be cancelled.
	(for approximately 1 minute)			and the sunlight sensor will
				start to detect.

Human activity sensor operation

ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.

Mode	Human	Low activity	Normal activity	High activity	Absent
COOL/DRY		+1 °C			+2 °C
	Set
HEAT	temperature
				-2 °C	-2 °C

AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human comfortable consistently.

Mode	Human	Low activity	Normal activity	High activity	Absent
		+1 °C			+2 °C
	Set
COOL/DRY		+0.3 °C
	temperature
				-1 °C
HEAT		+1 tap*		-2 °C	-2 °C
	Set			+1 tap
					0HGLXP )DQ
	Fan Speed

ECONAVI and AUTO COMFORT

Precise control of temperature during low activity to maximise energy saving.

Mode	Human	Low activity
COOL/DRY	Set
	temperature

ECONAVI and AUTO COMFORT take advantage of the human nature that human being takes time to feel the temperature rise during low activity level; the unit adjusts temperature to maximise energy saving without sacrificing the comfort.

*During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.

**During human absence, maximum fan speed for COOL/DRY mode is medium fan.

8

The human activity sensor will also scan for area of heat source and movement in a room.

Detection area

• Based on area activeness horizontal airflow direction louver will adjust either fix at
predetermined position or swing left/right periodically.	120º
• The human activity sensor performance is influenced by indoor unit location, movement
speed, temperature range, etc.	7m
• The human activity sensor may:

-mistakenly detect an object with heat source & movement similar to human, such as pets, etc.

-mistakenly detect as non-heat source & movement if a human stays motionless for certain period of time.

•Do not place large objects near the sensor and keep away heating units or humidifier from the sensor’s detection area. They may cause sensor malfunction.

Sunlight Sensor operation

ECONAVI ; Detecting sunlight intensity, the unit adjust temperature to save energy.

	Mode	Ambient condition
	COOL/DRY		+1 °C
		Set
	HEAT	temperature
		-1 °C	-1 °C

ECONAVI is activated, the unit maintains set temperature until a high

sunlight intensity is detected. The sunlight sensor detects sunlight intensity during weather or day/night changes, and the unit adjusts temperature.

• In a room without window or with thick curtain, the sunlight sensor will judge as cloudy/night.

Operation conditions

Use this air conditioner under the following temperature range.

DBT : Dry bulb temperature

WBT : Wet bulb temperature

Temperature (°C)				Indoor			Outdoor
			DBT		WBT	DBT		WBT
COOL		Max.	32		23	43		26
		Min.	16		11	-10		-
HEAT		Max.	30		-	24		18
		Min.	16		-	-15		-16

English To learn more...

9

Cleaning instructions

To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. Dirty unit may cause malfunction and you may see nanoe-G indicator blinks or error code “H99”. Please consult authorised dealer.

•Switch off the power supply and unplug before cleaning.

•Do not touch the aluminium fin, sharp parts may cause injury.

•Do not use benzine, thinner or scouring powder.

•Use only soap ( pH 7) or neutral household detergent.

•Do not use water hotter than 40 °C.

Indoor unit
Front panel	Aluminium fin

Human activity		nanoe-G
sensor	Air filters	Generator

Indoor unit

Wipe the unit gently with a soft, dry cloth.

Human activity sensor

Do not hit or violently press or poke it with a sharp object. This can lead to damage and malfunction.

Front panel

Wash gently and dry.

Remove the front panel

2 Pull out

1 Raise

Close it securely

1 Insert at both sides

2Close down

3Press both ends of the front panel

4For CS-HE18QKD:

Press at center of the front panel.

10

nanoe-G Generator

Every 2 weeks

• Clean with dry cotton bud.

• Do not touch during operation.

Air filters

Every 2 weeks

• Wash/rinse the filters gently with water to avoid damage to the filter surface.

•Dry the filters thoroughly under shade, away from fire or direct sunlight.

•Replace any damaged filters.

Remove air filter			Attach air filter

Insert into the unit

For seasonal inspection after extended non-use

•Checking of remote control batteries.

•No obstruction at air inlet and air outlet vents.

•Use Auto OFF/ON button to select COOL/ HEAT operation. After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:

COOL: ≥8 °C HEAT: ≥14 °C

For extended non-use

•Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth.

•Turn off the power supply and unplug.

•Remove the remote control batteries.

Troubleshooting

The following symptoms do not indicate malfunction.

	Symptom	Cause
	Mist emerges from indoor unit.	• Condensation effect due to cooling process.
Water flowing sound during operation.		• Refrigerant flow inside the unit.
The room has a peculiar odour.		• This may be due to damp smell emitted by the wall,
		carpet, furniture or clothing.
	Indoor fan stops occasionally during automatic	• This helps to remove the surrounding odour.
fan speed setting.
Airflow continues even after operation has		• Extraction of remaining heat from the indoor unit
stopped.		(maximum 30 seconds).
Operation is delayed a few minutes after		• The delay is a protection to the unit’s compressor.
restarting.
Outdoor unit emits water/steam.		• Condensation or evaporation occurs on pipes.
TIMER indicator is always on.		• The timer setting repeats daily once set.
POWER indicator blinks during HEAT mode		• The unit is in defrost mode (and AIR SWING is set to
with no warm air supply (and louver is closed).		AUTO).
Indoor fan stops occasionally during heating		• To avoid unintended cooling effect.
operation.
POWER indicator blinks before the unit is		• This is a preliminary step in preparation for the
switched on.		operation when the ON timer has been set.
Cracking sound during operation.		• Changes of temperature caused the expansion/
		contraction of the unit.
Check the following before calling for servicing.
	Symptom	Check
	Operation in HEAT/COOL mode is not working	• Set the temperature correctly.
efficiently.		• Close all doors and windows.
		• Clean or replace the filters.
		• Clear any obstruction at the air inlet and air outlet vents.
	Noisy during operation.	• Check if the unit has been installed at an incline.
		• Close the front panel properly.
	Remote control does not work.	• Insert the batteries correctly.
(Display is dim or transmission signal is weak.)		• Replace weak batteries.
The unit does not work.		• Check if the circuit breaker is tripped.
		• Check if timers have been set.
	The unit does not receive the signal from the	• Make sure the receiver is not obstructed.
remote control.		• Certain fluorescent lights may interfere with signal
		transmitter. Please consult authorised dealer.

English Cleaning instructions / Troubleshooting

NON SERVICEABLE CRITERIAS

TURN OFF POWER SUPPLY AND

UNPLUG then please consult authorised dealer under the following conditions:

•Abnormal noise during operation.

•Water/foreign particles have entered the remote control.

•Water leaks from Indoor unit.

•Circuit breaker switches off frequently.

•Power cord becomes unnaturally warm.

•Switches or buttons are not functioning properly.

The unit stops and the TIMER indicator blinks.

Use remote control to retrieve error code.

	1 Press for	ON		SET
		TIMER
	5 seconds	1	2	3
	3 Press for	OFF		CANCEL
				AC RC
	5 seconds	SET CHECK CLOCK		RESET
	to quit
	checking

2Press until you hear beep sound, then write down the error code

4Turn the unit off and reveal the error code to authorised dealer

•For certain errors, you may restart the unit for limited operation with 4 beeps when operation starts.

11

Information

Information for Users on Collection and Disposal of Old Equipment and Used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

				For business users in the European Union
				If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
				further information.
				[Information on Disposal in other Countries outside the European Union]
				These symbols are only valid in the European Union. If you wish to discard these items, please contact
				your local authorities or dealer and ask for the correct method of disposal.
				Note for the battery symbol (bottom two symbol examples):
				This symbol might be used in combination with a chemical symbol. In this case it complies with the
Pb				requirement set by the Directive for the chemical involved.

Declaration of Conformity

with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in Electrical and Electronic Equipment

(adopted by Order №1057 of Cabinet of Ministers of Ukraine)

The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment (TR on RoHS).

The content of hazardous substance with the exemption of the applications listed in the Annex №2 of TR on RoHS:

1.Lead (Pb) – not over 0,1wt % or 1000wt ppm;

2.Cadmium (Cd) – not over 0,01wt % or 100wt ppm;

3.Mercury (Hg) – not over 0,1wt % or 1000wt ppm;

4.Hexavalent chromium (Cr6+) – not over 0,1wt % or 1000wt ppm;

5.Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm;

6.Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm.

12

Инструкции по эксплуатации

Кондиционер

Модель №.
Внутренний блок	Наружный блок
CS-HE7QKD	CU-HE7QKD
CS-HE9QKD	CU-HE9QKD
CS-HE12QKD	CU-HE12QKD
CS-HE18QKD	CU-HE18QKD

Название и адрес завода-изготовителя указаны на упаковке и на изделии.

Обеспечение максимального комфорта, чистого воздуха и оптимальной экономии энергии

ECONAVI и AUTO COMFORT

Благодаря датчику человеческой активности кондиционер обеспечивает подачу холодного или теплого воздуха и поддерживает комфортные климатические условия в помещении при минимальном потреблении энергии.

Кроме того, для максимального комфорта при регулировании температуры в режимах нагрева/ охлаждения используется датчик интенсивности солнечного света.

Дополнительные сведения см. в разделе “Дополнительная информация...”.

nanoe-G

Поддерживает чистоту воздуха, устраняя из него вредные микроорганизмы, такие как вирусы, бактерии и т.д.

Также уничтожает вирусы и бактерии на фильтре для поддержания чистоты внутри аппарата.

14

Краткая инструкция

Вставьте элементы питания

1	2	1	Потяните и снимите заднюю
3			крышку пульта дистанционного
			управления
		2	Вставьтебатарейки(AAA илиR03)
			(можетиспользоваться~ 1 год)
		3	Закройте крышку

	2	3	Установка часов
TIMER			1	Нажмите кнопку CLOCK
ON		SET
			2	Установите время
1	2	3
OFF		CANCEL	3	Подтверждение
1		AC RC
SET CHECK CLOCK		RESET

	AUTO		FAN
	HEAT		SPEED
	COOL
	DRY		AIR
	MILD		SWING
	DRY
2	ECONAVI		AUTO
			COMFORT
3			NANOE-G
1	MILD DRY
	COOLING
	POWERFUL/	FAN SPEED	AIR SWING
	QUIET
	TIMER
	ON		SET
	1	2	3
	OFF		CANCEL
		AC RC
	SET CHECK CLOCK		RESET

8m

Основные функции

1 Выберите необходимый режим

AUTO HEAT DRY COOL

2 Включить/остановить работу

POWER

•Обратите внимание на то, что для включения устройства индикация ВЫКЛЮЧЕНИЯ должна указывать на.

3Выберите необходимую температуру

•Диапазон выбора: 16 °C ~ 30 °C.

•Использование кондиционера в диапазоне рекомендованных температур способствует экономии электроэнергии.

НАГРЕВ: 20 °C ~ 24 °C. ОХЛАЖДЕНИЕ: 26 °C ~ 28 °C.

ОСУШЕНИЕ: 1 °C ~ 2 °C ниже комнатной температуры.

•Нажмите и удерживайте в течение

5секунд, чтобы уменьшить или восстановить яркость индикатора блока.

•Используйте пульт дистанционного управления в радиусе 8 метров от приемника сигнала дистанционного управления внутреннего блока.

Иллюстрации в данном руководстве предназначены для пояснительных целей и могут отличаться для конкретного кондиционера. В связи с последующим совершенствованием конструкции могут вноситься изменения без предварительного уведомления.

Содержание
Меры предосторожности...	16-17
Как пользоваться ...............	18-19
Дополнительная
информация... ..................20-21
Инструкции по чистке.............	22
Устранение
неисправностей ......................	23
Информация.......................	24-26

Принадлежности

•Дистанционное управление

•Батарейки AAA или R03 × 2

•Держатель пульта дистанционного управления

•Винты для держателя пульта дистанционного управления × 2

Руccкий

15

Меры предосторожности

Во избежание получения травм, нанесения телесных повреждений другим лицам и ущерба имуществу следует соблюдать следующие инструкции:

Неправильная эксплуатация вследствие несоблюдения инструкций нанесет вред или ущерб, степень серьезности которых классифицируется следующим образом:

Этот символ

предупреждает о ПРЕДУПРЕЖДЕНИЕ смертельной опасности

или о риске получения серьезной травмы.

Этот символ

предупреждает об

ПРЕДОСТЕРЕЖЕНИЕ опасности травмы или нанесения вреда

имуществу.

Инструкции, которые следует выполнять, обозначаются следующими символами:

Этот символ обозначает действие как ЗАПРЕЩЕННОЕ.

Эти символы обозначают действия как ОБЯЗАТЕЛЬНЫЕ.

Электросна-

бжение

Внутренний блок Воздухозаборник

Воздуховыпускное

отверстие

Дистанционное Воздухозаборник

управление

Наружный
блок	Воздуховыпускное
	отверстие

ПРЕДУПРЕЖДЕНИЕ

Внутренний и наружный блоки

Данное устройство может использоваться лицами с ограниченными физическими, чувствительными или умственными способностями (включая детей) или лицами с отсутствием опыта или знания только при условии, что они находятся под надзором или

получили от лица, ответственного за их безопасность, соответствующие инструкции по использованию изделия. Дети должны находиться под наблюдением. Необходимо следить за тем, чтобы они не играли с устройством.

Для чистки внутренних деталей, ремонта, установки, переноса и переустановки блока следует обращаться к официальному дилеру. Неправильная установка и обращение могут привести к утечке, поражению электрическим током или пожару.

Проконсультируйтесь с авторизованным дилером или специалистом относительно использования любого указанного типа хладагента.

Использование хладагента другого типа может привести к повреждению изделия, взрыву или телесным повреждениям и т. д.

Не устанавливайте блок в потенциально взрывоили огнеопасной среде. Несоблюдение данного условия может привести к пожару.

Не вставляйте пальцы или другие предметы в наружный или внутренний блок кондиционера, поскольку вращающиеся части могут нанести травму.

Не прикасайтесь к наружному блоку кондиционера во время грозы, это может привести к поражению электрическим током.

Во избежание переохлаждения не подвергайте себя прямому воздействию холодного воздуха в течение длительного времени.

Не садитесь и не становитесь на устройство, вы можете упасть.

Дистанционное управление

Держите пульт ДУ вдали от грудных и маленьких детей, во избежание случайного проглатывания батарей.

Электроснабжение

Во избежание перегрева и возникновения пожара не используйте модифицированный шнур, сращенный шнур, удлинитель или шнур, не соответствующий техническим условиям.

16