Kodak SCANZA Manual

0 (0)
KODAK SCANZA
DIGITAL FILM SCANNER
User Manual
4.7"W | 4.7"H | 5"D (120 x 120 x 127mm)
Please read all directions before using the product and retain this guide for reference.
2
3
INTRODUCTION
BOX CONTENTS
SAFETY PRECAUTIONS
TIPS
OPERATING INSTRUCTIONS
A. CONTROLS
B. PREPARING MEDIA TO SCAN
C. OPERATION
CAPTURE MODE
A. COLOR & BRIGHTNESS ADJUSTMENT
GALLERY MODE
A. ROTATE IMAGE
B. FLIP IMAGE
C. DELETE IMAGE
D. SLIDESHOW
SETTINGS
A. FILM TYPE
B. RESOLUTION
C. LCD BRIGHTNESS
D. USB UPLOAD
E. FILM TRAY
F. MEMORY
G. LANGUAGE
CONTENTS
1
2
3
4
5
6
7
8
9
5
5
6
6
7
812
8
911
12
1315
1415
15
16
16
17
17
1826
1820
2021
2122
2223
2324
2425
2526
4
SPECIFICATIONS
CUSTOMER SERVICE CONTACT INFORMATION
WARRANTY
10
11
12
26
27
2730
5
1. INTRODUCTION
Thank you for purchasing the KODAK SCANZA Digital Film Scanner. This User
Guide is intended to provide you with guidelines to ensure that operation of
this product is safe and does not pose risks to the user. Any use that does not
conform to the guidelines described in this User Guide may void the limited
warranty.
This product is intended for household use only.
This product is covered by a limited warranty and is subject to conditions
and exclusions.
Easily convert your slides, negatives, and even Super 8 frames to digital
images that you can store and preserve. Save your treasured memories on
an SD™ card (not included), or to your computer. You can also directly connect
to a TV or HDTV to view images.
Converts 35mm, 126, 110 and Super 8 and 8mm ilm negatives and slides
to JPEGS in seconds
14/22 megapixel resolution
No computer or software required
Adjustable scanning resolution, brightness and coloration
Tilt-up 3.5" color TFT color LCD screen
Saves images to SD memory card (not included) or computer
Video-out for TV connection (TV and HDMI cables included)
Convenient, easy-loading ilm and negative adapters and inserts
MAC and PC compatible
2. FEATURES
6
Digital ilm scanner Video cable AC adapter Warranty card
3 Adapter trays HDMI cable Cleaning brush
3 Inserts USB cable User guide
Important: Do not expose this product to liquids or high humidity.
Do not handle this product with wet hands. Risk of electric shock.
Warning: Do not attempt to disassemble or alter this unit. This device
contains no user-serviceable parts.
Do not block any ventilation openings.
Do not operate this device near heat sources such as radiators or stoves.
When connecting the KODAK SCANZA Scanner directly to your computer,
be careful to not over load the USB connections. If you have too many
devices connected to your computer, such as a wireless mouse, media
player, mobile phone or other USB powered devices, there may not be
enough power for the product to function properly.
Do not move or disconnect the device from the computer while the device is
reading/writing data. This may cause damage to the data and/or the device.
Slides and negatives MUST be placed in the proper adapter tray and insert
before inserting them into the product. Failure to do so may result in losing
media inside the unit and will void the warranty. Resultant media loss is NOT
covered under warranty.
Always turn o and unplug the device when it is not in use. Unplug the USB
cable from your computer and unplug the AC adapter from the socket.
With the exception of Slideshow in Playback or ile transfer in USB mode, this
unit will automatically power o after 10 minutes of inactivity.
3. BOX CONTENTS
4. SAFETY PRECAUTIONS
7
Place the scanner on a lat, stable surface with the LCD display facing you.
Use the included cleaning brush to clean the backlight, adapter, or insert.
Insert the brush — CLEANING PAD SIDE DOWN — into the adapter opening
on the bottom of the unit. Gently wipe the inside bottom of the unit. Never
use alcohol, detergents, or abrasive cleaning agents to clean this device.
Always remember to save your scanned image before inserting another slide
or negative into the scanner.
For clear images, clean your ilm with a soft cloth or compressed air prior to
inserting it into the scanner.
Negatives and slides should be inserted with the shiny side up. Super 8 ilm
should be inserted with the perforated holes facing up.
Always handle ilms with care to avoid scratches or ingerprints.
View your images on your TV. Simply connect the included video or HDMI
cable to the scanner and your TV. Note that when using this mode, the
screen on the ilm scanner will turn black. To reactivate the screen, the
HDMI cable will need to be unplugged.
5. TIPS
8
6. OPERATING INSTRUCTIONS
4
1
2
3
5
1. Function keys (soft keys): The function is indicated by the text that will
appear on the screen above the corresponding key.
2. Power button: Press and hold to turn the device on and o.
3. Capture button: Captures the image or brings up the capture view screen.
4. Tilt-up LCD screen: Displays the image to be captured and scanned as well
as functions and menus.
5. Home button: Takes you to the Home screen.
6A. CONTROLS
NOTE: Illustrations are for instructional
purposes only, and may be dierent
from the actual product.
1. Function Keys
2. Power On/O Button
3. Capture Button
4. Tilt-up LCD Screen
5. Home Button
9
Before using your ilm scanner, you must insert an SD
TM
card (not included) or
the unit will not operate. There is no built-in memory.
Load your ilm/slide into the appropriate adapter and insert according
to the Tray Directory below. (Table can be found onscreen at
Home>Settings>Film Tray).
Each adapter tray and insert is clearly marked and numbered.
6B. PREPARING MEDIA TO SCAN
10
TRAY DIRECTORY
FILM
TYPE
FILM TYPE ADAPTER
NEEDED
INSERT
NEEDED
Negative Color Negative 135 No. 2 None
Color Negative 126 No. 1 None
Color Negative 110 No. 2 No. 5
Slide Slide Positive 135 No. 1* None
Slide Positive 126KPK No. 1* None
Slide Positive 110 No. 1* No. 6
Slide Positive Super 8 None No. 4
Slide Positive 8MM None No. 4
Black &
White
Black & White 135 No. 2 None
Black & White 126KPK No. 1 None
Black & White 110 No. 2 No. 5
*Note: Use adapter # 3 for slides with a thicker casing (plastic).
Use adapter # 1 for slides with a thin cardboard casing.
Slides 35mm 110 110 126 127
Mount 2"x2" 2"x2" 1"x1" 2"x2" 2"x2"
Film Size 24x36mm 13x17mm 13x17mm 28x28mm 40x40mm
Loading...
+ 22 hidden pages