Models114G and 114GQC Air Hammer Exploded Diagram
1B
|
|
|
|
1A |
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
13 |
|
|
12 |
|
|
|
|
|
|
|
|
|
|
|
15 |
14 |
|
|
|
|
|
16 |
|
|
|
9 |
|
10 |
|
|
|
|
|
19 |
|
|
|
|
|
|
11 |
8 |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
17 |
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
5 |
|
18 |
|
|
|
|
|
6 |
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
(Dwg. 16585986) |
|
|
|
|
|
|
|
Models 114G and 114GQC Air Hammer Parts List |
|
|
|
|
|||
Item |
Part Description |
Part Number |
Item |
|
Part Description |
|
Part Number |
1 |
Handle for Model 114G |
114G-59 |
9 |
Regulator O-Ring |
|
114G-167 |
|
1A |
Nameplate for Model 114G |
114G-301 |
10 |
Regulator Retaining Pin |
|
114G-120 |
|
1B |
Warning Label for Model 114G |
114GQC-99 |
11 |
Trigger |
|
|
114G-93 |
1 |
Handle for Model 114GQC |
114GQC-59 |
12 |
Trigger Pin |
|
|
114G-121 |
1A |
Nameplate for Model 114GQC |
114GQC-301A |
13 |
Valve Seat |
|
|
114G-3 |
1B |
Warning Label for Model 114GQC |
114GQC-99 |
14 |
Valve |
|
|
114G-2 |
2 |
Throttle Ball Seat |
114G-303 |
15 |
Valve Cap |
|
|
114G-4 |
3 |
Throttle Plunger Assembly |
114G-A64 |
16 |
Barrel Assembly (includes piston) |
|
114G-A6 |
|
4 |
Throttle Plunger O-Ring (2) |
114G-168 |
17 |
Spring Retainer for Model 114G |
|
9505 |
|
5 |
Throttle Ball |
114G-50 |
† 18 |
Quick Change Retainer for Model 114GQC |
9510 |
||
6 |
Throttle Ball Spring |
114G-11 |
19 |
Grip |
|
|
114G-747 |
7 |
Inlet Bushing |
114G-565 |
* |
Body Shop Chisel Kit |
|
114G-K3 |
|
8 |
Power Regulator Assembly |
114G-A250 |
* |
5 Piece Chisel Set |
|
9500 |
* Not Illustrated.
† Available as an upgrade for Model 114G
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center. Refer all communications to the nearest Ingersoll Rand Office or Distributor.
16585952
Edition 3 May 2014