QuickSpecs
HP ProLiant DL160 Generation 5
Hot Plug SAS/SATA and Non-Hot Plug SATA Models
Front View:
1.Access panel
2.Quad-Core Intel® Xeon® 5400 series processors (supports up to two)
3.Eight PC2-5300 (DDR2-667) or PC2-6400 (DDR2-800) fully buffered DIMM memory slots
4.Power supply (650 Watts)
Rear View:
1.Power Supply Cable Socket
2.PS/2 Mouse Port
3.PS/2 Keyboard Port
4.Two GbE LAN ports for NIC 1 and NIC 2 (RJ-45)
5.Rear USB ports
6.LO100i 10/100 Mbps LAN port for IPMI management (RJ-45)
5. |
System fans |
7. |
Video Port |
6. |
Optional CD-RW or DVD-ROM drive |
8. |
Serial Port |
7. |
Two USB ports |
9. |
Low-Profile PCI Express x8/PCI-X riser board slot cover |
8. |
Power on/off & system LEDs |
10. |
Standard height/full-height PCI Express x16/PCI-X riser |
|
|
|
board |
9.Optional 3rd and 4th 3.5” Non-Hot plug SATA or hot plug SAS/SATA hard drive bays
10.Standard 1st and 2nd 3.5” Non-Hot plug SATA or hot plug SAS/SATA hard drive bays
11.Expansion Slots:
Non-Hot Plug Models – Two available x16 PCI-Express Gen2 slots
Hot Plug Models – One available x16 PCI-Express slot Gen2 slot
What's New
Support for up 400GB 3G 10K 3.5" DP SAS Enterprise Hard Drive
At A Glance
The HP ProLiant DL160 G5 server is an affordable 1U, dual processor capable server equipped with essential performance features that provide customers with a platform to design a fully optimized solution. It is ideal for general purpose and high performance computing.
Processors:
Supports up to two Intel® Quad-Core 5400 or Dual-Core 5200 sequence processors
|
|
|
|
|
|
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 1 |
|
|
||
|
|
QuickSpecs
HP ProLiant DL160 Generation 5
Overview
Quad-Core Intel® Xeon® processors 5400 sequence with 12 MB Level 2 cache Dual-Core Intel® Xeon® processors 5200 sequence with 6 MB Level 2 cache
Intel® 5400 Chipset
Memory:
Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of PC2-6400 (DDR2-800) fully buffered DIMMs (DDR2-667) with Advanced ECC
Internal Drive Support:
Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or;
Support for up to four 3.5" Hot plug Serial Attached SCSI (SAS) or SATA hard drives.
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
Internal storage capacity of up to 1.0TB (4 x 1TB Hot Plug 3.5" SATA), 3.0TB (4 x 750 Non-Hot Plug SATA) or 4.0TB (4 x 1TB Hot Plug 3.5" SAS)
Network Controller:
Two embedded NC105i PCIe Gigabit Server Adapters
Storage Controllers:
Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller NOTE: Transfer rate: 1.5 Gb/s SATA
Hot Plug SAS/SATA Models: HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. NOTE: Transfer rate: 1.5 Gb/s SATA, 3Gb/s SAS
Expansion Slots:
Non-Hot Plug Models: Two available PCI Express 2.0 slots: Slot 1: full-length/full-height PCI-Express 2.0 x16 Slot 2: low-profile/half-height PCI-Express 2.0 x16
Hot Plug Models: One available PCI-Express slot: Slot 1: full-length/full-height PCI-Express 2.0 x16
Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller
Management:
HP Lights Out 100i Advanced Remote Management with new licensed key activated upgrades for Virtual KVM and virtual media support. LO100i management support for the DL160 G5 includes:
IPMI 2.0 & SMASH CLP support
ROM Setup Utility
Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD-ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements)
Enhanced browser interface and embedded KVM over IP provides OS-independent remote graphical console
New Licenses that have EULAs with one-time, optional, license activation key to allow for easy, future upgrades which will be chargeable when they become available.
USB Ports:
Five USB ports (two front, one internal, two rear)
Optical Drive:
Support for one (optional): DVD-ROM, DVD/CD RW
Power Supply:
650W Power Supply (Non-Hot Plug, Autoswitching)
Optional high-efficiency model
NOTE: Optional high-efficiency model requires the purchase of HP Power Supply Backplane (453652B21)
Additional Features:
Support for:
NVIDIA Quadro FX3700 512MB PCIe x 16 graphics card NVIDIA Quadro FX1700 512MB PCIe x 16 graphics card
Form Factor:
Rack (1U)
Fixed mounting rails included with all models
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 2 |
QuickSpecs
HP ProLiant DL160 Generation 5
Overview
Deployment/Serviceability:
Tool-less access to all system components for easy in rack serviceability
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty. SAS Midline drives have a one-year warranty. SAS Enterprise drives have a three-year warranty.
NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 3 |
QuickSpecs
HP ProLiant DL160 Generation 5
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-6954ENW.pdf
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section.
Processor |
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB) |
|
|||
One of the following |
NOTE: Available through Configure To Order only. See Factory Integration Models section for |
|
|||
depending on Model |
more details. |
|
|
|
|
|
|
Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB) |
|
||
|
|
Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB) |
|
||
|
|
NOTE: Available through Configure To Order only. See Factory Integration Models section for |
|
||
|
|
more details. |
|
|
|
|
|
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB) |
|
||
|
|
NOTE: Available through Configure To Order only. See Factory Integration Models section for |
|
||
|
|
more details. |
|
|
|
|
|
Quad-Core Intel® Xeon® processor L5430 (2.60 GHz, 50W, 1333MHz FSB) |
|
||
|
|
NOTE: Available through Configure To Order only. See Factory Integration Models section for |
|
||
|
|
more details. |
|
|
|
|
|
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB) |
|
||
|
|
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB) |
|
||
|
|
Quad-Core Intel® Xeon® processor E5472 (3.00 GHz, 80W, 1600MHz FSB) |
|
||
|
|
Quad-Core Intel® Xeon® processor E5462 (2.80 GHz, 80W, 1600MHz FSB) |
|
||
|
|
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) |
|
||
|
|
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) |
|
||
|
|
Dual-Core Processors |
|
|
|
|
|
Dual-Core Intel® Xeon® processor X5272 (3.40 GHz, 80W, 1600MHz FSB) |
|
||
|
|
Dual-Core Intel® Xeon® processor L5240 (3.00 GHz, 40W, TDP, 1333MHz FSB) |
|
||
|
|
NOTE: Available through Configure To Order only. See Factory Integration Models section for |
|
||
|
|
more details. |
|
|
|
|
|
|
|
|
|
Upgradeability |
Upgradeable to two processors |
|
|
||
|
|
|
|
|
|
Chipset |
Intel® 5400 Chipset |
|
|
|
|
|
|
|
|
|
|
Cache Memory |
12 MB (2 x 6 MB) Level 2 cache (5400 sequence) |
|
|
||
|
|
6 MB (1 x 6 MB) Level 2 cache (5200 sequence) |
|
|
|
|
|
|
|
|
|
Memory Protection |
Advanced ECC capabilities |
|
|
||
|
|
|
|
|
|
Memory |
Type |
PC2-5300 (DDR2-667) and PC2-6400 (DDR2-800) |
|
||
|
|
Standard |
1 GB |
(2 x 512 MB) |
|
|
|
Maximum |
32 GB |
(8 x 4 GB) PC2-6400 |
|
|
|
|
64 GB |
(8 x 8 GB) |
|
|
|
|
|
|
|
|
|
|
|
|
|
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 4 |
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
Network Controller Two embedded NC105i PCIe Gigabit Server Adapters
Expansion Slots # |
Technology |
Bus Width |
Connector |
Bus |
Device No.** Form Factor |
Notes |
|
|
|
|
Width* |
Number* |
|
|
|
1 |
PCI-Express |
x16 |
x16 |
1 |
0 |
Full length, |
3.3 volts |
2.0 |
|
|
|
|
full height |
|
|
|
|
|
|
|
|
||
1 |
PCI-X*** |
64-bit |
N/A |
5 |
1 |
Full length, |
3.3 volts |
|
|
|
|
|
full height |
|
|
|
|
|
|
|
|
|
|
2 |
PCI-Express |
x16 |
x16 |
6 |
3 |
Low Profile |
3.3 volts |
2.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
PCI-X*** |
64-bit |
N/A |
5 |
1 |
Low Profile |
3.3 volts |
|
NOTE: All slots can accept universal keyed PCI cards |
|
|
|
*Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
**Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
***PCI-X bus speed will be 133MHz when only one PCI-X card is installed. It will be 100MHz when both slots have PCI-X cards installed.
Storage Controller |
Non-Hot Plug SATA |
HP Embedded SATA RAID Controller (integrated into the south-bridge) |
|
|
Models |
supporting SW RAID 0,1 |
|
|
|
NOTE: Transfer rate: 1.5 Gb/s SATA |
|
|
Hot Plug SATA/SAS |
HP SC40Ge HBA with RAID 0, 1 |
|
|
Models |
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA |
|
|
|
Hard Drives are required. |
|
|
|
NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS |
|
|
NOTE: A diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is |
||
|
needed to install storage controller drivers during a Windows operating system installation from a |
||
|
CD. |
|
|
|
|
|
|
Storage |
Optical Drives: |
|
|
|
DVD-ROM |
8x IDE (ATAPI) DVD-ROM drive, slim (optional) |
|
|
DVD/CD RW |
24x IDE (ATAPI) CD-ROM drive (optional) |
|
|
Diskette Drives |
Via USB only |
|
|
Drive Bays: |
|
|
|
Non-Hot Plug SATA |
Up to 4 Non-hot plug SATA 3.5" drives |
|
|
Hot Plug SATA/SAS |
Up to 4 Hot plug SAS/SATA 3.5" drives |
|
|
|
|
|
Maximum Internal |
Non-Hot Plug SATA |
3.0TB |
4 x 750GB |
Storage |
Hot Plug SATA |
4.0TB |
4 x 1TB |
|
Hot Plug SAS |
4.0TB |
4 x 1TB |
|
|
|
|
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 5 |
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
Interfaces |
Parallel |
None |
|
|
Network RJ-45(Ethernet) |
2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights |
|
|
|
Out 100i Remote Management) |
|
|
Serial |
1 |
|
|
Pointing Device (Mouse) |
1 |
|
|
Graphics |
1 |
|
|
Keyboard |
1 |
|
|
USB |
5 (two front, one internal, two rear) |
|
|
|
NOTE: Please see the following URL for additional information |
|
|
|
regarding USB support: |
|
|
|
http://h18004.www1.hp.com/products/servers/platforms/usb- |
|
|
|
support.html. |
|
|
|
|
|
Graphics |
32MB shared supporting 1600x1200x16M resolution |
||
|
|
|
|
Form Factor |
Rack (1U), (1.75 in/4.45 cm) |
||
|
|
|
|
Server Management |
Lights-Out 100i |
HP Lights-Out 100i Remote Management delivers affordable, entry level |
|
Stand Alone Software |
|
remote management capabilities for HP ProLiant 100 Series servers |
|
Product and ProLiant |
|
with embedded LO100i. It allows customers or their service providers to |
|
Essentials |
|
remotely manage ProLiant 100 Series servers remotely over a LAN or |
|
|
|
the Internet and consists of the following: |
|
|
|
LO100i Standard is embedded remote management and provides |
|
|
|
basic remote control via telnet, browser, and IPMI 2.0 and |
|
|
|
SMASH |
|
|
|
LO100i Advanced Pack License are upgrades for essential, |
|
|
|
secure, remote control, serial console, virtual media, and Virtual |
|
|
|
KVM (graphical hardware-based, remote console) |
|
|
|
NOTE: Flexible and volume quantity (AKA) license kits are available for |
|
|
|
the Lights-Out 100i Lights-Out 100 Advanced Pack licenses as well as |
|
|
|
Electronic License To Use (E-LTU). AKA Tracking licenses require a |
|
|
|
100 unit minimum forecast at initial contract signing. For these additional |
|
|
|
part numbers, please refer to each software products' QuickSpecs at |
|
|
|
this link for more information: |
|
|
|
http://h18004.www1.hp.com/products/servers/management/ |
|
|
|
remotemgmt.html. |
|
|
ProLiant Essentials |
Rapid Deployment Pack (RDP) extends HP Systems Insight Manager |
|
|
Rapid Deployment Pack |
with a complete deployment solution for HP ProLiant servers. RDP |
|
|
|
provides a central location to configure server hardware, deploy |
|
|
|
Windows, Linux and VMware ESX operating environments and install |
|
|
|
using images and scripted profiles. For more information, visit: |
|
|
|
http://www.hp.com/go/rdp. |
NOTE: Flexible and volume quantity license kits are available for
ProLiant Essentials Value Packs. Refer to:
http://www.hp.com/servers/proliantessentials or the various ProLiant
Essentials Value Pack product QuickSpecs for more information.
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 6 |
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
|
HP Systems Insight |
HP Systems Insight Manager (HP SIM) provides a unified, secure and |
|
Manager |
extensible standards-based environment to centrally manage servers, |
|
|
storage and other infrastructure devices, (both HP and non-HP) across |
|
|
multiple operating system platforms. |
|
|
|
Core Infrastructure |
Subscriber's Choice |
Subscriber's Choice Driver and Support Alerts/Notifications is a web- |
Management |
|
based email subscription service that provides software and driver |
|
|
change notifications for ProLiant products. Sign up at: |
|
|
http://www.hp.com/go/subscriberschoice |
|
|
and customize your profile to receive various new alerts as they become |
|
|
available, on a weekly or monthly basis. |
|
ROMPaq, software and |
The latest software, drivers, and firmware fully optimized and tested for |
|
latest drivers |
your ProLiant server and options, available through software and drivers |
|
|
download pages website at: http://www.hp.com/go/support. |
|
|
|
HP Serviceguard for HP Serviceguard for Linux is a high availability clustering solution designed to protect applications
Linux (SG/LX) |
and services from a wide variety of software and hardware failures, monitoring the health of each |
|||
|
|
server (node) and quickly responding to failures such as those that affect system processes, |
||
|
|
system memory, LAN media and adapters, and application processes. |
||
|
|
The following is a quick summary of HP Serviceguard for Linux features and support. For the most |
||
|
|
recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for |
||
|
|
Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info. |
||
|
|
Supported Linux Distributions: |
||
|
|
Red Hat EL 4 |
||
|
|
Red Hat EL 5 |
||
|
|
SUSE SLES10 |
||
|
|
Supported Server Platforms |
||
|
|
HP Integrity BladeSystem to Superdome |
||
|
|
HP ProLiant BladeSystem p-Class & c-Class |
||
|
|
HP ProLiant DL |
||
|
|
HP ProLiant ML |
||
|
|
IBM System x |
||
|
|
Dell PowerEdge |
||
|
|
Sun x64 |
||
|
|
Fujitsu Siemens PRIMERGY |
||
|
|
Supported Virtual Machines |
||
|
|
SG/LX in HP Integrity Virtual Machines guests |
||
|
|
SG/LX in VMware ESX guests |
||
|
|
SG/LX in Red Hat and SUSE Xen hosts (DOM0) |
||
|
|
Application Integration Toolkits |
||
|
|
HP Serviceguard for Linux Oracle Database Toolkit |
||
|
|
HP Serviceguard Extension for SAP on Linux (SGeSAP/LX) |
||
|
|
Free Application Integration Toolkits: |
||
|
|
|
|
Apache |
|
|
|
|
|
|
|
|
|
MySQL |
|
|
|
|
|
|
|
|
|
NFS |
|
|
|
|
|
|
|
|
|
PostgreSQL |
|
|
|
|
|
|
|
|
|
Samba |
|
|
|
|
|
|
|
|
|
Tomcat |
|
|
|
|
|
|
|
|
|
Sendmail |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 7 |
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
Disaster Tolerant Solutions
HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent
HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites
Software updates are distributed by HP Services to customers with support contracts
|
NOTE: For additional information on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx |
|
or see the HP Serviceguard for Linux QuickSpecs. |
|
NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers |
|
include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid |
|
access to HP support staff and proactive delivery of software updates. For more information about |
|
this service, please visit: http://www.hp.com/services/swsupport. |
|
|
Industry Standard |
ACPI V2.0 Compliant |
Compliance |
PCI 2.2 Compliant |
|
PXE Support |
|
WOL Support |
|
Microsoft® Logo certifications |
|
IPMI 2.0, SMASH CLP compliant |
|
|
Manageability |
HP Lights-Out 100i Standard provides the following OS-independent remote control capabilities: |
|
Virtual power |
|
System event log access |
|
System health |
|
Remote serial console (serial redirection) |
|
Browser, Telnet access |
|
SMASH-CLP compliant |
|
IPMI 2.0 compliant |
|
HP Lights-Out 100i Advanced Pack provides license key activated upgrades to the following: |
|
Virtual KVM (KVM over IP functionality embedded on the system board) |
|
|
Security |
Power-on password |
|
Setup password |
|
|
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 8 |
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
Server Power Cords |
One 6' Highline (IEC-IEC) power cord ships standard |
|
|
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) |
|
|
that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are |
|
|
primarily connected to PDU's in data center racks so they now ship standard with only a PDU |
|
|
power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle |
|
|
(NEMA-15), the NEMA power cord (227099-001) must be ordered separately. |
|
|
If customers require a local power cord, they can check the power cord matrix for the appropriate |
|
|
cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix. |
|
|
|
|
UPS and PDU Power |
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and |
|
Cord Matrix |
specifications for UPS and PDU units: |
|
|
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html. |
|
|
|
|
Power Supply |
650 Watts, auto-switching, PFC (Power Factor Correcting) |
|
|
NOTE: Factory upgradeable to high-efficiency (HE) power supply for lower TCO |
|
|
|
|
System Fans |
6 system fans ship standard; Non-hot plug, Non-redundant |
|
|
|
|
OS Support |
Microsoft Windows Server 2003 R2 |
|
|
Microsoft Windows Server 2008 |
|
|
Microsoft Windows Small Business Server 2008 |
|
|
Microsoft Windows Essential Server 2008 |
|
|
Red Hat Enterprise Linux |
|
|
SUSE Linux Enterprise Server |
|
|
Sun Solaris for x64/x86-based Systems |
|
|
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and |
|
|
Virtualization Software and latest listing of software drivers available for your server, please visit |
|
|
our Support Matrix at: http://www.hp.com/go/supportos and our driver download page |
|
|
http://www.hp.com/support/DL160G5. |
|
|
|
|
Rack Airflow |
Rack 10000 series Cabinets |
|
Requirements |
The increasing power of new high-performance processor technology requires increased cooling |
|
|
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for |
|
|
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. |
|
|
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure |
|
|
adequate airflow and to prevent damage to the equipment: |
|
|
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow |
|
|
5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate |
|
|
airflow (equivalent to the required 64 percent open area for ventilation). |
|
|
Side: The clearance between the installed rack component and the side panels of the rack must |
|
|
be a minimum of 7 cm (2.75 inches) |
|
|
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. |
|
|
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper |
|
|
cooling that can lead to thermal damage. |
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 9 |
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
|
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation |
|
|
CD provided with the server, or to the server documentation located in the Support section at the |
|
|
following URL: www.hp.com/servers/dl160. |
|
|
|
|
Rack Support |
The DL Fixed Rail System supports installation in racks with square or round mounting holes |
|
|
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36". |
|
|
Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. |
|
|
For additional information, please visit: www.racksolutions.com. |
|
|
|
|
Factory Express |
HP Factory Express offers configuration, customization, integration and deployment services for |
|
Portfolio for Servers |
HP servers and storage products. Customers can choose how their factory solutions are built, |
|
and Storage |
tested, integrated, shipped and deployed. |
|
|
Factory Express offers service packages for simple configuration, racking, installation, complex |
|
|
configuration and design services as well as individual factory services, such as image loading, |
|
|
asset tagging, and custom packaging. HP products supported through Factory Express include a |
|
|
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP |
|
|
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries |
|
|
and configurable network switches. |
|
|
For more information on Factory Express services for your specific server model please contact |
|
|
your sales representative or go to: http://www.hp.com/go/factory-express. |
|
|
|
|
HP Enterprise |
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP |
|
Configurator |
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and |
|
|
expectations of our valued customers. If you require "custom" rack configuration, please contact |
|
|
HP's Customer Business Center or an Authorized Partner for assistance. |
|
|
|
|
Service and Support |
HP Care Pack Services provide total care and support expertise with committed response |
|
|
designed to meet your IT and business needs. |
|
|
HP Care Pack Services provide total care and support expertise with committed response |
|
|
designed to meet your IT and business needs. |
|
|
HP Care Pack services include coverage for the HP branded hardware options qualified for the |
|
|
server that are purchased at the same time or afterward and internal to the enclosure. It also |
|
|
includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items |
|
|
will be covered at the same service level and for the same coverage period as the server. |
|
|
Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For |
|
|
servers or storage systems installed within a rack, service also covers all HP qualified rack |
|
|
options installed within the same rack. |
|
|
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who |
|
|
thoroughly understands your server technology and systems environment. HP Services, an |
|
|
industry leader in provision of multi vender support solutions provides a range of support services |
|
|
designed to meet the varying needs of business. Whether an SMB or large global corporation HP |
|
|
has a ProLiant server support offer to help you speedily deploy and maximize system uptime. |
|
|
Recommended Service – Simplify ProLiant solution implementation, maintenance and |
|
|
management. |
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 10 |
QuickSpecs
HP ProLiant DL160 Generation 5
Standard Features
Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service – Hardware Installation only
Enhanced Service – Optimize service level to increase IT performance and availability
Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service – Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 11 |
QuickSpecs
HP ProLiant DL160 Generation 5
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html
HPC Interconnects |
InfiniBand |
PCI-X and PCI-Express adapters |
|
Gigabit Ethernet |
Use embedded ports |
|
Myrinet XP |
PCI-X Rev D, Rev E and Rev F adapters |
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 |
Page 12 |