English
English |
For your safety, read all the instructions in this guide before using the setting plate. Incorrect handling that ignores instructions in this guide could damage the setting plate or could result in personal injury or property damage. Keep this installation guide at hand for future reference.
Read the User's Guide and Safety Instructions for your projector and follow the instructions in these documents.
The warning marks shown below are used throughout this installation guide to prevent personal injury or property damage. Make sure you understand these warnings when reading this installation guide.
Warning |
This symbol indicates information that, if ignored, could possibly result in personal injury or even death |
|
due to incorrect handling. |
||
|
|
|
Caution |
This symbol indicates information that, if ignored, could possibly result in personal injury or physical |
|
damage due to incorrect handling. |
||
|
This symbol indicates related or useful information.
Symbol indicating an action that must not be done
Symbol indicating an action that should be done
Warning
The setting plate is designed specifically for mounting a projector to a wall. If anything other than a projector is mounted, the weight may result in damage.
If the setting plate falls, it could cause personal injury or property damage.
The installation work (wall mounting) should be performed by specialists who have technical knowledge and ability. Incomplete or incorrect installation could cause the setting plate to fall and cause personal injury or property damage.
Follow the instructions in this guide when installing the setting plate.
If the instructions are not followed, the setting plate may fall, resulting in personal injury or an accident.
Handle the power cord carefully.
Incorrect handling may cause fire or electric shock. Observe the following precautions when handling:
•Do not handle the power plug with wet hands.
•Do not use a power cord that is damaged or modified.
•Do not pull the power cord with too much force when routing the cable through the setting plate.
Do not install the setting plate in a place where it might be subjected to vibration or shock.
Vibration or shock could cause damage to the projector or mounting surface. It could also cause the setting plate or projector to fall and cause personal injury or property damage.
Install the setting plate so that it can sufficiently support the mass of the projector and setting plate, and resist any horizontal vibration. Use M8 nuts and bolts.
Nuts and bolts smaller than M8 could cause the setting plate to fall. Epson accepts no responsibility for any damage or injury caused by lack of wall strength or inadequate installation.
The installation work should be performed by at least two qualified service personnel. If you need to loosen any screws during installation, be careful not to drop the setting plate.
If the setting plate or projector falls, it could cause personal injury or property damage.
2
Warning |
|
|
When you mount the projector on the wall with the setting plate, the wall requires enough strength to hold |
English |
|
the projector and the setting plate. |
||
|
||
This setting plate should be installed on a concrete wall. Confirm the weight of the projector and the |
|
|
setting plate before installation, and maintain the strength of the wall. If the wall is not strong enough, |
|
|
reinforce the wall before installation. |
|
|
Inspect the setting plate on a regular basis to ensure there are no broken parts or loose screws. |
|
If there are any broken parts, stop using the setting plate immediately. If the setting plate or projector falls, it could cause personal injury or property damage.
Never modify the setting plate.
Do not hang on the setting plate or hang a heavy object on the setting plate.
If the projector or setting plate falls, it could cause personal injury or property damage.
If you use adhesives to prevent the screws from loosening or things such as lubricants or oils on the slide plate fixing part of the projector, the case may crack and cause the projector to fall, resulting in personal injury or property damage. Do not use adhesives, lubricants, or oils to install or adjust the setting plate.
Tighten all screws firmly after adjustment.
Otherwise, the projector or setting plate may fall and cause personal injury or property damage.
Never loosen the bolts and nuts after installation.
Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them firmly.
Otherwise, the projector or setting plate may fall and cause personal injury or property damage.
When performing wiring, make sure the cable does not come into contact with any screws or bolts.
Handling the cable incorrectly may cause fire or electric shock.
Caution
Do not install the setting plate in a location where the operating temperature for your projector model may be exceeded.
Such an environment may damage the projector.
Install the setting plate in a place free from excessive dust and humidity to prevent the lens or optical components from becoming dirty.
Do not use excessive force when adjusting the setting plate.
The setting plate may break, resulting in personal injury.
3
Carry out the power supply wiring work for the installation location of the setting plate in advance.
Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of fluorescent lights could interfere with the remote control of the projector.
It is recommended to keep connection cable length less than 20 meters to reduce external noise.
We recommend using stick-on screens or board screens.
When using the Easy Interactive Function, make sure the projector is setup under the following conditions.
•The projection screen is a rectangular shape without any distortion.
•The projector is tilted at an angle of no more than ± 3° vertically and horizontally in relation to the projected screen.
•When using Keystone, the amount of V-Keystone and H-Keystone correction is no more than ±6.
This guide describes how to mount the short-throw projector EB-485Wi/485W/480i/480/475Wi/475W/470 to a wall using the exclusive setting plate.
4
1 |
Package Contents |
s p. 6 |
|
2 |
Specifications |
s p. 7 |
English |
|
|||
3 |
Connecting Devices |
s p. 9 |
|
4 |
Projection Distance Table |
s p. 10 |
|
|
|
5 Installation Procedure |
s p. 18 |
(1)Disassemble the parts
(2)Assemble the parts
(3)Install the wall plate on the wall
(4)Determine the projection distance and pull out the slider
(5)Route the cables through the setting plate
(6)Attach the setting plate to the wall plate
(7)Adjust the vertical slide to align it with the standard position
(8)Secure the projector to the setting plate
(9)Connect the power cord and other cables to the projector
6 Adjusting the Projection Screen |
s p. 28 |
(1)Turn on the projector
(2)Change the aspect ratio
(3)Display the test pattern
(4)Adjust the focus
(5)Use the left adjustment dial to adjust the horizontal roll
(6)Use the right adjustment dial to adjust the horizontal rotation
(7)Use the top adjustment dial to adjust the vertical tilt
(8)Adjust the horizontal slide
(9)Adjust the forward/backward slide
(10)Adjust the vertical slide
(11)Turn off the display of the test pattern
7 Attaching the Covers |
s p. 34 |
(1)Attach the wall plate cover and end cap
(2)Attach the cable cover to the projector
5
Setting plate
3-axis adjustment unit |
Slide plate |
*The slide plate is secured to the 3-axis adjustment unit when shipped.
End cap
Hexagon wrench (for M4) |
Open-ended spanner |
|
13 mm (for M8 and M6) x |
|
6 mm (for hexagonal axis) |
Wall plate
Wall plate cover
Template sheet
(for installing the wall plate)
Shape |
Name |
Quantity |
Application |
|
M4 x 12 mm hexagon socket head cap bolt with |
6 |
For wall plate assembly |
|
washer/spring washer |
4 |
For 3-axis adjustment unit/setting |
|
|
||
|
|
|
plate installation |
|
|
4 |
For slide plate/projector installation |
|
|
2 |
For slide plate/3-axis adjustment unit |
|
|
|
installation (secured when shipped) |
|
M6 x 20 mm hexagon shoulder bolt with washer/ |
1 |
For setting plate/wall plate installation |
|
spring washer |
|
|
|
M6 x 20 mm cross recessed head shoulder screw |
3 |
|
|
with plastic washer |
|
|
Use the bolts or screws supplied with the setting plate to install it as directed in this guide. Do not substitute these bolts with any other types.
You need to use commercially available M8 x 50 mm anchors (at least 3) to attach the wall plate to the wall.
Gather the tools and parts you need before you begin installation.
6
2. Specifications |
|
|
|
|
Item |
Specification |
Remark |
Reference |
English |
|
||||
|
|
|
Page |
|
Setting plate mass (including the |
Approx. 7.4 kg |
Setting plate (2.8 kg), 3-axis adjustment unit (1.1 kg), |
|
|
3-axis adjustment unit, slide plate, |
|
slide plate (0.7 kg), wall plate (2.5 kg), wall plate cover |
|
|
wall plate, wall plate cover, and |
|
and end cap (0.3 kg) |
|
|
end cap) |
|
|
|
|
Maximum load capacity |
7 kg |
|
|
|
Forward/backward slide |
0 to 310 mm |
Arm slide adjustment range: 0 to 248 mm |
Refer to the |
|
adjustment range |
|
Adjustment from 3-axis adjustment unit installation |
figure below |
|
|
|
position: 62 mm |
|
|
Vertical slide adjustment range |
± 38 mm |
|
Refer to the |
|
|
|
|
figure below |
|
Horizontal roll adjustment range |
± 3° |
Fine adjustments possible with adjustment dial |
s p. 30 |
|
Horizontal rotation adjustment |
± 3° |
Fine adjustments possible with adjustment dial |
s p. 31 |
|
range |
|
|
|
|
Vertical tilt adjustment range |
± 3° |
Fine adjustments possible with adjustment dial |
s p. 31 |
|
Horizontal slide adjustment range |
± 45mm |
|
Refer to the |
|
|
|
|
figure below |
|
The product is in three piece when shipped. Use the M4 x 12 mm bolts (x6) supplied to screw the separate pieces together before use.
[Unit: mm]
Vertical slide adjustment range
38 mm
38 mm |
7
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
45 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
45 mm |
Arm slide adjustment range
248 mm |
Adjustment from 3-axis adjustment unit installation position
By changing the installation position of the 3-axis adjustment unit to the front or back, you can adjust the installation position of the projector.
When the screen size is less than 70 inches, install it at the position marked with a stamp. When the screen size is 70 inches or more, install it at the position marked with a stamp.
62 mm
8
3. Connecting Devices |
English |
|
Prepare all necessary cables such as a power cord, computer cable, and a USB cable, at the location where the |
||
|
||
setting plate is to be installed. |
|
|
Prepare all necessary cables for devices, such as a document camera or microphone, that you will connect to |
|
|
the projector. For details, refer to the supplied User's Guide on the Document CD-ROM. |
|
Connection Example
External speakers |
LAN device |
LAN cable (commercially available product)
Audio cable
(commercially available product)
Computer cable
(for computer video output)
Microphone
Computer
Document camera |
USB cable |
|
(for Easy Interactive Function) |
||
|
Dedicated USB cable
(supplied with document camera)
When using the Easy Interactive Function (EB-485Wi/480i/475Wi only)
When drawing by connecting to a computer, you need a USB cable.
However, when drawing with the projector's built-in function, you do not need a USB cable.
9
Refer to the table below and install the setting plate and projector to project images at an appropriate size on the projection surface. The values are only rough estimates.
The recommended range for the projection distance (a) is 62 to 311 mm.
The numbers on the slider measure (b) are the same as the projection distance (a) when the screen size (S) is 70 inches or more. Because the installation position of the projector changes when S is less than 70 inches, the numbers for a and b differ.
70.5 mm |
Offset value for the position of the |
|
center of the screen and the center of |
|
the wall plate |
218 mm |
Wall plate |
|
|
|
Projection surface |
Distance from wall of |
|
projection surface |
|
10
When the screen size is less than 70 inches |
|
|
|
Mount the 3-axis adjustment unit at the position marked with a |
stamp. |
English |
|
The table below provides the figures when mounting the 3-axis adjustment unit at the position marked with a |
|||
|
|||
stamp. The numbers on the slider measure (b) differ from the projection distance (a). |
|
The distance (c) from the projection screen to the wall plate is the number given when the vertical slide is set to the standard position.
Match the notch on the setting plate to the position of the stamp on the wall plate.
Standard position
EB-485Wi/485W/475Wi/475W (4:3 aspect ratio) |
|
[Unit: cm] |
|||||
|
|
S |
a |
b |
c |
h |
|
|
Screen Size |
Projection |
Numbers on |
Distance |
Height of |
|
|
|
|
|
Distance |
the slider |
Between |
Projection |
Interactive Whiteboard |
|
|
|
Minimum |
measure |
Projection |
Surface |
|
|
|
|
|
||||
|
|
|
(Wide) to |
|
Surface |
|
|
|
|
|
Maximum |
|
and Wall |
|
|
|
|
|
(Tele) |
|
Plate |
|
|
|
|
|
|
|
|
|
|
53" |
|
107.7 x 80.8 |
6.2 - 19.3 |
12.4 - 25.5 |
17.4 |
80.8 |
|
|
|
|
|
|
|
|
|
57" |
|
115.8 x 86.9 |
9.1 - 23.1 |
15.3 - 29.3 |
18.6 |
86.9 |
PolyVision TS410 |
|
|
|
|
|
|
|
|
60" |
|
122.0 x 91.4 |
11.2 - 25.9 |
17.4 - 32.1 |
19.5 |
91.4 |
HitachiCambridge board60 |
|
|
|
|
|
|
|
RM Classboard 60 |
|
|
|
|
|
|
|
INTERWRITE® BOARD 1060 |
|
|
|
|
|
|
|
INTERWRITE Dual board 1260 |
|
|
|
|
|
|
|
|
63" |
|
128.0 x 96.0 |
13.3 - 28.8 |
19.5 - 35.0 |
20.4 |
96.0 |
Hitachi Starboard FX DUO 63 |
|
|
|
|
|
|
|
|
64" |
|
130.0 x 97.5 |
14.0 - 29.7 |
20.2 - 35.9 |
20.7 |
97.5 |
SmartBoard660 |
|
|
|
|
|
|
|
ActivBoard 164 |
|
|
|
|
|
|
|
|
66" |
|
134.2 x 100.6 |
15.4 - 30.7 |
21.6 - 36.9 |
21.3 |
100.6 |
TeamBoard RT TMWM5422CL/ |
|
|
|
|
|
|
|
EM |
|
|
|
|
|
|
|
|
69" |
|
140.3 x 105.2 |
17.5 - 30.7 |
23.7 - 36.9 |
22.2 |
105.2 |
|
|
|
|
|
|
|
|
|
The smallest screen size is 53".
11