Package Contents
•D-Link DIR-451 Mobile Router
•Power Adapter
•Ethernet Cable
•Manual and Warranty on CD
Note: Using a power supply with a different voltage rating than the one included with the DIR-451 will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
System Requirements
•A compatible 32-bit PCMCIA (UMTS or HSDPA) card with service*
•Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet adapter
•Internet Explorer Version 6.0 or Netscape Navigator™ Version 6.0 and above (for configuration)
* Subject to services and service terms available from you carrier.
D-Link DIR-451 Quick Install Guide |
|
Connect to your network
Note: Ensure that power to your DIR-451 Mobile Router is not connected before performing the installation steps below.
32-bit PCMCIA (UMTS or HSDPA) Card Connection
1.Attach the antenna.
a.Remove the antenna from its plastic wrapper.
b.Screw the antenna in a clockwise direction to the back panel of the unit.
c.Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception.
2.Insert your wireless 32-bit PCMCIA (UMTS or HSDPA) Card into the Internet Card Slot on the back of the router.
3.Insert the Ethernet cable into LAN Port 1 on the back panel of the DIR-451 Mobile Router, and an available Ethernet port on the network adapter in the computer you will use to configure this unit.
Note: The DIR-451 Mobile Router LAN Ports are “Auto-MDI/MDIX.”This provides either patch or crossover Ethernet cable LAN Port access.
4.Connect the power adapter to the receptor on the back panel of your DIR-451 Mobile Router. Then plug the other end of the power adapter into a wall outlet or power strip.
a.The Power LED will turn ON to indicate power has been applied.
b.Other LEDs will flash ON and OFF as the DIR-451 Mobile Router performs initialization and Internet connection processes. This will take a few minutes.
c.When complete, the following LEDs will illuminate blue: Power, Status, Internet, WLAN, and LAN Port 1 (or your specific LAN Port connection).
|
D-Link DIR-451 Quick Install Guide |
Loading...