Bosch UPH-C498N-L86154, UPH-C485P-L8120, UPH-C498N-L8120, UPH-C630N-L86154, UPH-C498P-L8120 Specifications

CCTV | High‑Speed Positioning System

The Bosch High-Speed Positioning System (HSPS) is a
complete solution that is high on quality and performance.
It can pan 360° continuously at speeds of up to 100° per
second. An extensive range of options lets you tailor the
system to your specific requirements. For example, the

HSPS offers a variety of DinionXF and Dinion 2X cameras
and lens combinations, and the system can be ordered
with two Bosch AEGIS UFLED Infrared Illuminators for
operation in dark environments.

Autopan and patrol functions are accurate to within 0.02°,
with text labels assigned to presets for added
convenience. Automatic lens scaling, which keeps zoom
and speed synchronized, ensures smooth video pictures
throughout pan and tilt movement.

A completely self-contained unit, the High-Speed
Positioning System is easy to install and maintain. Multi­protocol capabilities, including Bilinx and Biphase, also
simplify connections. The tough, protective casing can
support a 20 kg balanced load and is IP66-rated – ideal
for weathering the outdoor conditions common in traffic
and industrial applications. All units have a sunshield and
an integrated wiper. The wiper is available with an
optional washer.

High-Speed Pan/Tilt with Infrared Illumination

The IR 360 version of the High-Speed Positioning System
comes with a bracket and two Bosch AEGIS UFLED
Infrared Illuminators, without the need for rotating cables.
The IR 360 system features two local alarm inputs, one
input for synchronizing the infrared lighting and one relay
output for an intelligent local alarm.

System Overview

Modular Design

The High-Speed Positioning System is based on four
modules: the camera and lens sled assembly, the Main
Pan/Tilt unit including the base power supply, the
optional mounting hardware and the optional illuminators.

The modular design allows you to customize an HSPS to
fit your specific application. To build an HSPS, select one
option from Modules A and B. In addition, you may
further customize your HSPS by selecting an optional
mounting solution from Module C and two optional
illuminators from Module D.

Module A: Camera and Lens Combination

Choose from a selection of Bosch Dinion cameras and
lenses. This module comes pre-assembled and attached to
a sled that is installed inside the HSPS housing. Use this
ordering chart to construct the Camera/Lens combination:

High‑Speed Positioning System

▶

Pans up to 100º per second, 360º continuous rotation

▶

Tilts up to 40º per second, -90º to +40º range

▶

Choice of DinionXF Color or Dinion 2X Day/Night
cameras and motorized zoom lens combinations

▶

IP 66 rated, tough, attractive casing with up to 20 kg
balanced load

▶

Optional Bosch AEGIS UFLED Infrared Illuminator
assembly attaches directly to the High-Speed
Positioning System for operation in dark
environments

▶

Multi-protocol including Biphase, Bilinx, Pelco-D, and
third party protocols on RS-485

www.boschsecurity.com

2 | High‑Speed Positioning System

8120

8585

86154

485

P

UPH

C

2

- ­N

498

610

630

L

1

3

1 Camera

485

LTC 0485 DinionXF Color Camera, 1/3 in.

498 LTC 0498 Dinion 2X Day/Night Camera, 1/3 in.

610

LTC 0610 DinionXF Color Camera, 1/2 in.

630 LTC 0630 Dinion 2X Day/Night Camera, 1/2 in.

2 Video Format

N NTSC

P PAL

3 Lens

8120 8-120 mm motorized zoom lens

8585 8.5-85 mm IR-corrected motorized zoom lens

86154 8.6-154 mm IR-corrected motorized zoom lens

Module B: Pan/Tilt System with Power Supply

Choose a main pan/tilt system and power supply
combination. The Standard System contains a high­performance pan/tilt head, camera housing with an
optional integrated wiper, and a telemetry receiver. The IR
360 System contains all the Standard System features
plus a bracket assembly for two (2) illuminators.

Option Description

UPH-HD-230

•

Standard System

•

230 VAC, 50 HZ Power Supply

UPH-HWD-230

•

Standard System

•

Wiper

•

230 VAC, 50 HZ Power Supply

UPH-HWD-120

•

Standard System

•

Wiper

•

120 VAC, 60 HZ Power Supply

UPH-HD-24

•

Standard System

•

24 VAC, 50/60 HZ Power Supply

UPH-HWD-24

•

Standard System

•

Wiper

•

24 VAC, 50/60 HZ Power Supply

UPH-HWDIR-24

•

IR 360 System

•

Wiper

•

24 VAC, 50/60 Hz Power Supply

Module C: Mounts

Choose an optional mounting solution for the Standard or
for the IR 360 System.

Option Description

MTC-PUPH Top of pole mount

MTC-WUPH Wall mount

MTC-CORN-W Corner adapter for wall mount

MTC-POLE-W Side of pole adapter for wall mount

Module D: Illuminators

Choose two (2) optional Bosch AEGIS UFLED Intelligent

Infrared Illuminators.

1, 2, 3

Suggested Models Description

UFLED10-8BD 10°, 850 nm

UFLED20-8BD 20°, 850 nm

UFLED30-8BD 30°, 850 nm

1. The IR Illuminator option is available only with the UPH-HWDIR-24

(IR 360 Main Pan/Tilt System).

2. You may select two of the same or two different illuminators.

3. 940 nm (covert) and White Light (visible) wavelength options also

compatible. Performance characteristics will vary. See the UFLED

datasheet for illumination distances.

Functions

Multi-protocol

The High-Speed Positioning System operates with Bosch
hardware platforms – Divar, DiBos, Allegiant – and is fully
compatible with control protocols such as Biphase, Bilinx,
Pelco-D, and third party protocols on RS-485. Biphase
allows control of pan, tilt, zoom, focus, and the wiper /
washer. Bilinx offers the same functionality as Biphase,
with additional communication capability for configuring
Dinion camera settings.

High-Speed Pan/Tilt with Automatic Scaling

The unit can reach a very fast panning speed of 100º per
second with 360º continuous panning in manual mode.
The HSPS can achieve tilt speeds of 40º per second in
manual mode. It also offers ample scope for changing the
horizontal view, with movement ranging between -90º
below and +40º above the horizon. To ensure smooth,
clear pictures during rapid movement, automatic scaling
synchronizes the pan/tilt speed to the amount of zoom.

High‑Speed Positioning System | 3

DinionXF- and Dinion 2X-Dynamic Cameras

The Bosch-High Speed Positioning System comes with a

choice of 1/3-inch or 1/2-inch DinionXF Color or Dinion 2X
Day/Night CCDs with 540 TVL resolution, and outstanding
sensitivity. The Dinion cameras deliver the highest
possible image quality even in the most difficult lighting
conditions.

Using 2X-Dynamic technology, pixel-by-pixel analysis
provides the user with the most detailed information. Turn
on SmartBLC to automatically compensate the image
without the need for complicated set-up or compromising
dynamic range.

XF-Dynamic

The highly accurate 15-bit (DinionXF cameras) or 20-bit
(Dinion 2X) digital signal is automatically processed to
optimally capture the detail in both the high and low light
areas of the scene simultaneously, maximizing the
information visible in the picture.

NightSense and SensUp

DinionXF Color cameras feature NightSense which
increases sensitivity by 9 dB in monochrome mode.
NightSense can be automatically activated in low light
situations, or remotely using Bilinx.

DinionXF and Dinion 2X Day/Night cameras make optimal
use of the available lighting by utilizing the built-in SensUp
feature. By increasing the integration time on the CCD up
to 10 times, the effective sensitivity is dramatically
enhanced. This is especially useful when relying only on
moonlight for illumination.

Default Shutter

When viewing moving objects a fast shutter speed is
required. When using a fast shutter speed the lens
opening or gain control needs to be increased to maintain
the video signal. The camera sensitivity is limited by the
fast shutter speed. The default shutter setting offers the
best of all worlds, fast shutter speed as long as there is
sufficient light, however as the light level falls, when other
adjustments have been exhausted, the shutter reverts to
the standard setting maintaining the cameras excellent
sensitivity.

Auto Black

The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog, mist).

Programmable Modes

Dinion cameras support three independent operating
modes. The three modes are preprogrammed for typical
applications, but are fully programmable for individual
situations. Switching between modes is easy via Bilinx or
the external alarm input

Infrared Illumination

The Bosch AEGIS UFLED, the world’s first Intelligent­infrared illuminator, combines innovations in infrared
technology and design to deliver absolute performance in
night vision surveillance.

Constant Light technology compensates for LED
degradation, a natural occurrence with all LED-based
illuminators, to deliver a constant level of lighting
performance throughout the life of the illuminator.

Powered by award-winning 3D-Diffuser technology, Bosch
AEGIS UFLED delivers Even-Illumination which lights the
foreground and background of the scene eliminating
hotspots and underexposure.

Certifications and Approvals

Safety acc. to EN 60950 (CE), UL

Immunity acc. to EN 50130-4 (CE)

acc. to EN 55022 Class B (CE)

Emission acc. to EN 61000-3-2 (CE)

acc. to EN 61000-3-3 (CE)

Water/dust protection IP 66 acc. to EN 60529

Installation/Configuration Notes

For more information on Dinion cameras (e.g. LTC 0498)
and motorized zoom lenses (e.g. LTC 3783/51), please
refer to their specific product datasheets.

HSPS Standard System Dimensions

258 (10.16)

www.boschsecurity.com