Blaupunkt BT12OUTDOOR User Manual

0 (0)

BT12OUTDOOR

Owner's Manual

Instrukcja obsługi

Návod k obsluze

Príručka vlastníka

Használati útmutató

Bluetooth speaker with FM and MicroSD playback Głośnik Bluetooth z radiem FM i odtwarzaniem kart microSD Reproduktor Bluetooth s tunerem FM a přehráváním z karet microSD Bluetooth reproduktor s rádiom FM a prehrávaním microSD Bluetooth hangszóró FM-rádióval és MicroSD-lejátszással

BT12OUTDOOR

Many thanks to buy our product. This model includes below main features. Bluetooth function for audio streaming playback.

PLL FM radio with station memory.

MicroSD card playback(max supported device till 64GB) .

Aux in.

Built-in rechargeable battery power.

Water proof IPX4

Location of controls

1.Battery charging LED.

2.LED Indicator.

a.Blue color: Bluetooth mode.

b.Flare green color: microSD card playback mode.

c.Steady green color: FM radio mode.

d.Pink color: AUX in mode.

BT12OUTDOOR

3,5./ button: Volume +/-, previous and next control.

a.Press and hold it to adjust the output volume level.

b.In Bluetooth and microSD card playback mode, short press it to skip the playback track.

c.In FM radio mode, short press it to pick up the preset station.

4. : Power on/off, source and play/pause control.

a.Press and hold it in 2 seconds to power on or off the unit.

b.Short press this button twice repeatedly to switch the play mode between Bluetooth/FM/microSD and AUX IN mode.

c.In Bluetooth and microSD card playback mode, short press it to play pause or resume music playback.

d.In FM radio mode, short press it to scan and save the available station automatically.

6.MicroSD card slot.

7.AUX IN jack.

8.MicroUSB DC 5V power jack.

9.Microphone hole (backside of front speaker grill).

Battery charging

This unit had built-in rechargeable lithium battery inside. Before start the playing, please

follow up below step for charging.

1.Open the rubber cap on the rear panel, using the supplied USB to microUSB type charging cable connects the speaker with your USB charger (USB adaptor or USB output port like on PC, USB rating output: 5V/1A, other USB charger with current equal or above 1A). The microUSB connector should connect with the DC 5V power jack on the rear panel of speaker, and the another terminal connect with USB charger. Then plug your USB charger on household AC power.

2.The charging LED will light on in red color during charging, and the red color LED will off when the battery is fully charged.

3.The red color charging LED will be blinking when the battery power is too low, please arrange recharge for playing.

Important: We recommend connect the USB charger with rating output spec at DC 5V/1A, or equal or above 1A output current USB power. The general USB output on PC (personal computer) is 5V/1A (please reference your PC spec for checking). There may have some charging noise or abnormal function from speaker if the charging current is too low. If it happened, please remove the charging power and put the speaker in a while, then the speaker will reset the function in normal. Please kindly note this is not malfunction.

Notes:

Your battery lifetime will last longer if you follow up below simple guidelines for charging and storing.

a.For charging first time, charge it at least 10 hours.

b.Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).

c.Do not charge longer than 24 hours. Excessive charging or discharging may shorten the battery's life.

d.Battery life naturally shortens slowly over time.

e.Please turn off the speaker if long time not to use.

f.The speaker can play music during charging.

g.Due to prolong charging and discharging, the unit battery life will be affected and playback time will also be shortened. We cannot guarantee the same playback consistently throughout and this is not include in our warranty and service.

BT12OUTDOOR

Bluetooth operation

The speaker includes Bluetooth function which allows you to wireless playback the audio with other Bluetooth device like smart phone etc. Please follow up below for the operation.

1.Press and hold button 2 seconds to power on the unit, short press the twice to switch the play source and enter to the Bluetooth mode. The blue color LED will flare which

means the speaker is ready to pair with other device.

2.Enable the Bluetooth function on your Bluetooth device, and search the available Bluetooth device( please reference your device manual for the operation).

3.Check the available Bluetooth device on the menu list of your device, and select“ BP BT12” in order to start pairing. Please key-in “0000” (4 zero) in case of a POP password required during pairing. The blue LED will become stable when the pairing is successful.

4.Select and play the music on your Bluetooth device. Then the sound will output from speaker.

5.During Bluetooth playback, you can short press the button to play or pause the music; short press the orbutton to select last or next track; press and hold or button to decrease or increase the volume.

Phone call hands free: when the cell phone was paired with speaker in Bluetooth mode, and an incoming call is arriving; short press the button can pick up the call; answer the phone call and talk aim to the microphone hole within 30cm(suggested distance) in order get better conversation sound quality; short press the button again can end the phone call and resume the music playback.

Notes:

a.All Bluetooth devices are not guaranteed to pair successfully due to different design and brand.

b.Please do not put your cell phone very close to the speaker during phone call hands free conversation, in order to avoid interference which will impact the conversation sound quality.

c.The Bluetooth best working distance is within 10 meters without any obstacle in between.

d.The speaker can broadcast the incoming phone call number smartly in Bluetooth mode.

FM radio operation

Before listen to the radio, please try to move the unit next to the window as you can, and insert the supplied 3.5mm to 3.5mm stereo audio cable into the AUX IN jack as an external antenna in order to get better reception.

1.Power on the unit, and short press the button twice to enter FM radio mode.

2.Short press the button to auto scan and save the available FM station( max supported 50 preset station ); short press the or to select the last or next preset station; press and hold the or button to decrease or increase the volume.

TF/MicroSD card playback

Please copy the MP3 format music into the TF or MicroSD card device (max supported 64GB) before start the playing, and then insert the card into the slot on the rear panel of unit. Power on the unit, and short press the button twice to enter the MicroSD playback mode; the speaker will read out the card device automatically, and get the music output after few seconds.

In TF/MicroSD card playback mode, short press the or to select the last or next preset station; press and hold the or button to decrease or increase the volume. Short press the

button to play or pause the music.

BT12OUTDOOR

Notes:

a.The TF/MicroSD card playback mode is only available when there have card device installed on the speaker successfully.

b.The supported audio format is MP3/WMA in TF/MicroSD playback mode, but not guarantee all mentioned format audio file .

c.Not all TF/MicroSD card devices are supported due to different design and brand, the max supported storage is 64GB.

d.Please kindly insert the TF or MicroSD card into the slot properly.

AUX IN/ MP3 link mode

Using the supplied 3.5mm to 3.5mm stereo audio cable connect the AUX jack on the speaker rear panel with the line out or headphone jack on any other external audio player like mp3 player etc. Power on the speaker and short press the button twice to enter the AUX IN playback mode; select and play the music from your external audio player, then the sound will output from the speaker.

Notes:

a.In AUX IN mode, the main control is on your external audio player side. But you still can increase or decrease the volume on the speaker side.

b.Please kindly note the AUX in mode is only available when the audio cable was plugged in.

Specification:

Power source: DC5V, 1A; (or DC 5V, rating current above 1A)

Bluetooth version 3.0, best working distance within 10 meters

FM Frequency: 87.5~108.00MHz

TF/MicroSD card supported device till to 64GB max, support audio format MP3/WAV Rated power: 2 x 5W

Battery power: 4000mAH rechargeable lithium battery

Charging time: approximately 6 hours base on DC5V, 1A input.

Music playback time: 7.0 hours around.

Power consumption: 10 Watt

Standby power consumption: < 0.5Watt

Accessory:1 pcs x USB charging cable , 1 pcs x 3.5mm to 3.5mm audio cable (The above spec may revise without prior notice)

Trouble shooting

1.The unit cannot power on.

a.Please charge the unit and try again.

b.Please contact the service center in case of issue remains.

2.There is no or intermittent sound output in Bluetooth mode.

a.Please turn off the Bluetooth, and repair with the speaker.

b.Please put your Bluetooth device closer with the speaker.

3.No available FM station or background noise in FM.

a.Please plug on the 3.5mm stereo audio cable and re-scan the available FM station.

b.Please tune to another FM station for listening.

c.Please try to move the unit next to the window in order to get better reception.

4.The speaker cannot read out the music in TF or microSD card.

a.Please check if you insert the TF or microSD card into the slot properly.

b.Please check if the audio format is in MP3/WMA.

BT12OUTDOOR

+ 31 hidden pages