VAP2400
Wireless Video Bridge
MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. All other product or service names are the property of their respective owners. ©2011 Motorola Mobility, Inc. All rights reserved.
No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time.
CONTENTS |
|
Installation and Overview........................................................ |
5 |
About this Manual................................................................................. |
6 |
Box Contents......................................................................................... |
6 |
Front Panel............................................................................................ |
7 |
Rear Panels........................................................................................... |
8 |
Installing Your VAP2400 (Dual Units)..................................................... |
9 |
Step 1: Install the Access Point........................................................ |
9 |
Step 2: Install the Client................................................................... |
10 |
Installing Additional VAP2400 Clients.................................................... |
12 |
Troubleshooting.......................................................................... |
15 |
Solutions............................................................................................... |
15 |
Safety and Compliance............................................................... |
17 |
VAP2400 Wireless Video Bridge • Installation Manual |
iii |
1 |
INSTALLATION AND OVERVIEW |
The VAP2400 enables you to transmit multiple standardand high-definition video streams throughout your home wirelessly. You can enjoy a full range of video services and applications without having to run wires, lay cables, or drill holes. The VAP2400 uses one-button, Wi-Fi Protected Setup (WPS) technology to ensure easy, reliable installation.
The VAP2400 operates via two (or more) integrated units. You’ll dedicate one unit as the Access Point and the other unit (or units) as its Client. When you connect a VAP to your home gateway, it auto-configures as an Access Point. The Access Point streams content to the Client, which you’ll connect to a secondary set-top in a different location in your home. (The Client auto-configures as well when you connect it to the set-top.) The following graphic illustrates this setup:
Room 1
OR
Secondary Set-top
Room 2
OR
VAP2400 Wireless Video Bridge • Installation Manual |
5 |
Installation and Overview
ABOUT THIS MANUAL
This manual provides you with instructions on how to install your VAP2400 series video bridge. Motorola designed the VAP2400 series to install and integrate easily with your set-top box and home network. If you encounter any difficulties during the installation process, refer to the Troubleshooting section at the end of this manual.
BOX CONTENTS
Your box should contain the following:
Single Unit Bundle (for additional Clients) |
Dual Unit Bundle (for initial installation) |
||
|
|
|
|
One VAP2400 Series |
|
Two VAP2400 Series |
|
connection kit |
|
connection kits |
|
|
|
|
|
One Ethernet Cable |
|
Two Ethernet Cables |
|
|
|
|
|
One Power Adapter |
|
Two Power Adapters |
|
|
|
|
|
VAP2400 Wireless Video Bridge • Installation Manual |
6 |
Installation and Overview
FRONT PANEL
1
2
3
1 |
Power |
Green = The VAP is on |
|
|
|
Amber = The VAP is on standby |
|
|
|
Off = The VAP is off or disconnected from its power source |
|
|
|
|
|
2 |
Wireless Link Quality |
Solid Green = Wireless quality is good |
|
|
|
Flashing Green = Wireless quality is average |
|
|
|
Off = No wireless connection |
|
|
|
|
|
3 |
Operational Mode |
Solid Green = The VAP is functioning as an Access Point |
|
|
|
Solid Amber = The VAP is functioning as a Client |
|
|
|
Blinking Amber = There is an error. Refer to “Troubleshooting” for more |
|
|
|
details. |
|
|
|
Off = The automatic configuration process has failed |
|
|
|
|
|
|
|
|
|
VAP2400 Wireless Video Bridge • Installation Manual |
7 |
||
Installation and Overview
REAR PANELS
1 |
|
|
|
|
|
|
1 |
||
|
|
|
|
|
|
|
|||
2 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|||||
3 |
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
4 |
||
|
|
|
|
|
|
|
|||
4 |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|||||
|
|
Single Port |
Four Port |
||
|
|
|
|
|
|
1 |
Reset Button |
|
Resets the VAP to its default settings |
|
|
|
|
|
|
|
|
2 |
WPS Button |
|
Establishes wireless connection to your home network |
|
|
|
|
|
|
|
|
3 |
Ethernet Port |
|
Connects to an Ethernet-equipped computer, hub, or switch using an |
|
|
|
|
|
RJ-45 cable connection. |
|
|
|
|
|
|
|
|
4 |
Power Jack |
|
Provides power to the VAP2400 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VAP2400 Wireless Video Bridge • Installation Manual |
8 |
||||
Loading...