*
D7504A
D7505A
HP 10/100 3Com 3C905B-TX
Network Interface Card
Installation Guide
Network Interface Card
Installationsanleitung
Guide d’installation de la carte d’interface réseau
Guía de Instalación de la
Tarjetade Interfaz de Red
Léase esto primero
Guida di installazione della scheda di interfaccia di rete
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Notice
Notice
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of its hardware or software on equipment that is not furnished by Hewlett-Packard or equipment for which it is not intended.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.
Acrobat® and Adobe® are trademarks of Adobe Systems Incorporated and may be registered in certain jurisdictions.
3Com®, EtherLink® and EtherDisk® are U.S. registered trademarks of 3Com Corporation.
Magic PacketTM and PCnetTM are U.S. trademarks of AMD Corporation.
Microsoft®, Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation.
Hewlett-Packard France
Commercial Computing Division
5 Avenue Raymond Chanas
38053 Grenoble Cedex 9
France
1999 Hewlett-Packard Company
Excerpted material reprinted with permission from 3Com Corporation.
1998 3Com Corporation
2 English
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
What’s in the Network Kit?
What’s in the Network Kit?
The Network Kit includes the following items:
|
Quantity in Network Kit |
||
Component |
|
|
|
D7504A |
D7505A |
||
|
|||
|
|
|
|
HP 10/100 3Com 3C905B-TX network |
1 |
10 |
|
interface card (NIC) |
|
|
|
|
|
|
|
LAN driver diskettes |
3 |
3 |
|
|
|
|
|
Remote Wake-Up cable |
1 |
10 |
|
|
|
|
|
This Installation Guide |
1 |
1 |
|
|
|
|
Installation Requirements
Supported Operating Systems
•Windows 95 SR2 or later
•Windows 98
•Windows NT 4.0 and Service Pack 3 or 4
The driver installation diskettes contain drivers for other network operating systems. For more information on installing these drivers, refer to the Readme files provided on the installation diskettes. The latest drivers are available on HP’s Web site.
English 3
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Installation Requirements
Supported Platforms
To find out in which PCs you can install a 3C905B-TX card, go to one of the following HP Web sites:
•For Vectra Corporate PCs http://www.hp.com/go/vectraaccessories
•For Brio Business PCs http://www.hp.com/go/brioaccessories
•For Kayak PC Workstations http://www.hp.com/go/kayakaccessories
NT Service Pack
If an NT service pack is already installed on the PC, it must be re-installed after the card and software have been installed. When using the HP preloaded NT 4.0 software, the latest service pack can be found in the C:\I386\SPx directory.
On some platforms you also have to reinstall certain drivers after you install the Service Pack. Refer to your PC documentation for more information.
Operating System Master Diskettes
During the software installation you will need to have your operating system master diskettes or CD-ROM available.
When using HP preloaded operating system software, the master files can be found in the following directories:
•C:\I386 (Windows NT 4.0)
•C:\WINDOWS\OPTIONS\CABS (Windows 95 and Windows 98)
4 English
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Installation Requirements
Supported Network Drivers
The following network drivers are supported by HP:
Network Operating System |
README |
Network Driver Name |
|
(for driver installation) |
|||
|
|
||
|
|
|
|
Windows 95 |
W95NDIS.TXT |
EL90XND3.SYS |
|
(Microsoft and NetWare clients) |
|
EL90XND4.SYS |
|
|
|
|
|
Windows 95 NDIS 2 |
W95NDIS.TXT |
EL90X.DOS |
|
|
|
|
|
Windows 98 |
WIN98.TXT |
EL90XND5.SYS |
|
(Microsoft and NetWare clients) |
|
|
|
|
|
|
|
Windows NT 3.51 |
WINNT.TXT |
EL90XND3.SYS |
|
(Microsoft and NetWare clients) |
|
|
|
|
|
|
|
Windows NT 4.0 |
WINNT.TXT |
EL90XND4.SYS |
|
(Microsoft and NetWare clients) |
|
|
|
|
|
|
|
NetWare client for DOS, Windows |
AUTOLINK.TXT |
3C90X.COM |
|
3.1, and Windows for Workgroups |
(AUTOLINK directory) |
|
|
|
|
|
|
Windows for Workgroups |
WFWNETWR.TXT |
3C90X.COM |
|
(NetWare) |
|
|
|
|
|
|
|
Windows for Workgroups (NDIS 2) |
WFWNDIS.TXT |
EL90X.DOS |
|
|
|
|
|
Windows for Workgroups (NDIS 3) |
WFWNDIS.TXT |
EL90X.386 |
|
|
|
|
|
Microsoft LAN Manager |
LANMAN.TXT |
EL90X.DOS |
|
|
|
|
English 5
CAUTION
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Overview of the Installation Procedure
Non-Supported Network Drivers
The following network drivers are provided on the EtherDisk® diskettes but are not supported by HP:
Network Operating |
README (for driver |
Network Driver Name |
|
System |
installation) |
||
|
|||
|
|
|
|
Banyan VINES |
BANYAN.TXT |
EL90X.DOS |
|
|
|
|
|
Artisoft LANtastic |
LANTASTK.TXT |
EL90X.DOS |
|
|
|
|
|
IBM LAN SERVER (DOS) |
LANSRVR.TXT |
EL90X.DOS |
|
|
|
|
|
IBM LAN SERVER (OS/2) |
LANSRVR.TXT |
EL90X.OS2 |
|
|
|
|
|
DEC PATHWORKS |
PATHWORK.TXT |
EL90X.DOS (DOS) and |
|
|
|
3C90X.COM (Netware) |
|
|
|
|
Overview of the Installation Procedure
Your PC and network interface card can be permanently damaged by static electricity. Before handling the card, touch the unpainted part of your PC’s metal chassis. Maintain grounding by wearing a wrist strap attached to the chassis. Handle the card by its backplate and top edge. Do not touch the edge connector.
Installing the 3C905B-TX NIC is a 4-step process. You need to:
•Install the card in your PC.
•Connect the card to the network.
•Update LAN-specific fields in the HP PC Setup utility.
•Install the driver software.
After you complete the installation, you can use the NIC Doctor software to troubleshoot any problems.
6 English
WARNING
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Installing the Network Interface Card
Installing the Network Interface Card
For your safety, never remove the PC’s cover without first removing the power cord, data cables and any connection to a telecommunications network. Always replace the cover before switching on again.
For complete information on how to install an accessory card, refer to your PC’s documentation. This is available from your PC’s support web site (refer to page 18.) The following steps are given as a guide:
1With the PC turned off, disconnect the power cord and any connection to a telecommunications network, and then remove the cover.
2Choose an empty PCI slot. If you do not know how to identify a PCI slot, refer to your PC’s documentation.
3Remove the metal slot cover.
4Depending on the PC model, you may need to remove the accessory slot’s retaining bracket. Refer to your PC’s documentation, if necessary.
5Insert the card into the accessory slot without bending it.
Example position of
WOL connector.
6Connect the Remote Wake-Up cable to the connector on the card and to connector on the system board or backplane.
For the position of the Remote Wake-Up connector, refer to “3C905B-TX NIC Specifications” on page 19.
Refer to your PC’s documentation for the position of the connector on the system board or backplane.
English 7
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Connecting to the Network
7Secure the card by replacing the slot cover screw or the retaining bracket and its screw, as appropriate.
8Replace the cover. Reconnect the power cord and any connection to a telecommunications network.
Connecting to the Network
Connect the network cable to the RJ-45 UTP (Unshielded Twisted Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100 Mbits/s operation.
RJ-45 UTP
Connector
Remote Wake-Up
The network interface card is able to wake the PC from a sleep state if it receives a special sequence (known as a Magic PacketTM) from the network.
8 English