Ultra-elegant Gigabit IP Phone
SIP-T46S
Quick Start Guide(V81.1)
www.yealink.com
Applies to firmware version 28.81.254.62 or later.
Packaging Contents
The following items are included in your package. If you find anything missing, contact your system administrator.
T46S |
Handset Cord |
Ethernet Cable |
Stand |
IP Phone |
Handset |
Quick Start Guide |
Power Adapter |
Wall Mount Bracket |
|
|
|
Optional |
Optional |
Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance.
Assembling the Phone
1. Attach the stand, as shown below:
A
40
B
45
Desk Mount Method
Note: You can also mount the phone to a wall. For more information on how to attach the wall mount bracket, refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.
2. Connect the handset and optional headset, as shown below:
Bluetooth USB Dongle BT40
Wireless Headset Adapter EHS36
Note: The headset, Bluetooth USB dongle BT40 or wireless headset adapter EHS36 should be purchased separately. The USB port can also be used to connect the Wi-Fi USB dongle WF40. The EXT port can also be used to connect the expansion module EXP40. For more information on how to use the EHS36, EXP40, BT40 and WF40, refer to Yealink EHS36 User Guide, Yealink EXP40 User Guide, Yealink Bluetooth USB Dongle BT40 User Guide and Yealink WiFi USB Dongle WF40 User Guide.
1
3. Connect the USB flash driver, as shown below:
4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one to use.
|
PC Connection |
|
|
|
|
Power Adapter |
||||||||
|
(Optional) |
|
|
|
|
|
|
|
(DC 5V) |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
PC Connection |
|
IEEE 802.3af compliant |
|
||
(Optional) |
|
PoE Hub/Switch |
Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may cause the damage to the phone.
If inline power (PoE) is provided, you don’t need to connect the power adaper. Make sure the hub/switch is PoE-compliant.
Startup
After the IP phone is connected to the network and
supplied with power, it automatically begins the
Welcome
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user interface or web user interface.
Initializing... Please wait
2