Yealink IP Phone
SIP-T27P
T27P
Quick Start Guide(V81.70)
www.yealink.com
Applies to firmware version 45.81.0.15 or later.
Packaging Contents
The following items are included in your package. If you find anything missing, contact your system administrator.
Handset Cord |
Ethernet Cable |
|
|
|
|
|
Stand |
|
|
||||||||||||||||
|
(1.5m CAT5E UTP Cable) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IP Phone |
Handset Quick Start Guide |
Power Adapter |
Wall Mount Bracket |
|
|
Optional |
Optional |
Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance.
Assembling the Phone
1. Attach the stand, as shown below:
A
B
Desk Mount Method
Note: You can also mount the phone to a wall. For more information on how to attach the wall mount bracket, refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.
2. Connect the handset and optional headset, as shown below:
Wireless Headset Adapter EHS36 |
Note: The headset or wireless headset adapter EHS36 should be purchased separately.
The EXT port can also be used to connect the expansion module EXP20. For more information on how to use the EHS36 and EXP20, refer to Yealink EHS36 User Guide and Yealink EXP20 User Guide.
1
3. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one to use.
PC Connection |
Power Adapter |
|
(Optional) |
||
(DC 5V) |
||
|
PC
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
PC
PC Connection |
IEEE 802.3af compliant |
(Optional) |
PoE Hub/Switch |
Note: The IP phone should be used with Yealink original power adapter (5V/1.2A) only. The use of the third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.
If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is PoE-compliant.
Startup
After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. After startup, the phone is ready for use. You can configure the phone via phone user interface or web user interface.
2
Loading...