VISHAY 440L, 30LV, 30LVS, 25Y, 125L Technical data

AC LINE RATED CERAMIC CAPACITOR SPECIFICATIONS

125L

440L, 30LV, 30LVS, 25Y, 125L, 20VL Series

Vishay Cera-Mite

AC Line Rated Disc Capacitors

X & Y EMI/RFI FILTER TYPES: ACROSS-THE-LINE, LINE-BY-PASS, ANTENNA COUPLING

Vishay Cera-Mite AC Line Rated Discs are rugged, high voltage capacitors specifically designed and tested for use on 125 Volt through 600 Volt AC power sources. Certified to meet demanding X & Y type worldwide safety agency requirements, they are applied in across-the-line, line-to-ground, and line-by-pass

filtering applications. Vishay Cera-Mite offers the most complete selection in the industry—six product families— exactly tailored to your needs.

•	Worldwide Safety Agency Recognition	PERFORMANCE DATA / SERIES:	440L	30LV		30LVS		25Y	125L	20VL
		Application Voltage Range
	- Underwriters Laboratories - UL1414 & UL1283		250/500	300/400		250/400		250/400	250	250
		(Vrms 50/60 Hz) (Note 1)
	- Canadian Standards Association - CSA 22.2 No. 1 & No. 8
		Dielectric Strength	4000	2500		2500		2500	2000	1250
	- European EN132400 to IEC 384-14 Second Edition	(Vrms 50/60 HZ for 1 minute)
		Dissipation Factor (Maximum)			2%
•	Required In AC Power Supply and Filter Applications
		Insulation Resistance (Minimum)			1000 ΩF
•	Six Families Tailored To Specific Industry Requirements	Mechanical Data	Service Temperature 125°C Maximum;
•	Complete Range of Capacitance Values			Coating Material per UL94V0
		Temperature Characteristics	Y5U	Y5U		Y5U		Y5S	Y5V	Y5V
			See Part Number Detail for Temperature Characteristics

SAFETY AGENCY RECOGNITION AND EMI/RFI FILTERING SUBCLASS

Series / Recognition / Voltage	440L	30LV	30LVS	25Y	125L	20VL
Underwriters Laboratories Inc.: (Note 2)
UL 1414 Across-The-Line	Across-The-Line	Across-The-Line	—	—	—	—
UL 1414 Antenna Coupling	Antenna-Coupling	Antenna-Coupling	—	—	—	—
UL 1414 Line-By-Pass	Line-By-Pass	Line-By-Pass	Line-By-Pass	Line-By-Pass	Line-By-Pass	—
UL 1414 Rated Voltage	250 VAC	250 VAC	250 VAC	250 VAC	250 VAC	—
Electromagnetic Interference Filters	EMI Filters	EMI Filters	EMI Filters	EMI Filters	—	EMI Filters
UL1283 Rated Voltage	600 VAC	250 VAC	250 VAC	250 VAC	—	250 VAC
Canadian Standards Association:
CSA 22.2 No.1 Across-The-Line	Across-The-Line	Across-The-Line	—	—	—	—
CSA 22.2 No.1 Isolation	Isolation	Isolation	Isolation	Isolation	Isolation	—
CSA 22.2 No. 1 Rated Voltage	250 VAC	250 VAC	250 VAC	250 VAC	125/250 VAC	—
CSA 22.2 No. 8 Line-to-Ground Capacitors	—	Line-To-Ground	Line-To-Ground	Line-To-Ground	—	Line-To-Ground
For Use in Certified EMI Filters	—	Certified EMI Filters	Certified EMI Filters	Certified EMI Filters	—	Certified EMI Filters
CSA 22.2 No. 8 Rated Voltage	—	400 VAC	400 VAC	400 VAC	—	250 VAC
European CENELEC Electronic Components Committee (CECC) EN 132 400 to Publication IEC 384-14 Table II, Edition 2:
IEC 384 -14 Second Edition Subclass Y: (Note 3)	Y1	Y2	Y2	Y2	Y4	—
Subclass Y Voltage (Vrms 50-60 Hz)	500 VAC	300 VAC	250 VAC	250 VAC	125 VAC
Type of Insulation Bridged	Double or	Basic or	Basic or	Basic or	Basic or	—
	Reinforced	Supplementary	Supplementary	Supplementary	Supplementary
Peak Impulse Voltage Before Endurance Test	8 kV	5 kV	5 kV	5 kV	2.5 kV	—
IEC 384-14 Second Edition Subclass X: (Note 4)	X1	X1	X1	X1	X1	X2
Subclass X Voltage (Vrms 50-60 Hz)	400 VAC	400 VAC	400 VAC	400 VAC	400 VAC	400 VAC
Peak Impulse Voltage in Service	2.5 to 4.0 kV	2.5 to 4.0 kV	2.5 to 4.0 kV	2.5 to 4.0 kV	2.5 to 4.0 kV	To 2.5 kV
Application	High Pulse	High Pulse	High Pulse	High Pulse	High Pulse	Gen. Purpose
Damp Heat, Steady State Recognition		Code HKF - 25°C/ + 125°C/21 days

Note 1

Voltage Ratings: All ratings are manufacturer’s rating.

•Part markings are governed by agency rules and customer requirements.

•Parts are marked 250 VAC unless otherwise requested.

Note 2

UL1414 Across-The-Line, Antenna Coupling, and

Line-By-Pass Capacitors:

•Across-The-Line—A capacitor connected either across a supply circuit or between one side of a supply circuit and a conductive part that may be connected to earth ground.

•Antenna-Coupling—A capacitor connected from an antenna terminal to circuits within an appliance.

•Line-By-Pass—A capacitor connected between one side of a supply circuit and an accessible conductive part.

Note 3

IEC 384-14 Subclass Y Capacitors:

•A capacitor of a type suitable for use in situations where failure of the capacitor could lead to danger of electric shock.

•Class Y capacitors are divided into subclasses based on type of insulation bridged and voltage ranges.

•For definitions of basic, supplementary, double and reinforced insulation, see IEC Publication 536.

•Subclass Y capacitors may be used in

applications	which	require a	Subclass
X rating.
Note 4
IEC 384-14 Subclass X Capacitors:
• A capacitor	of a	type suitable	for use

in situations where failure of the capacitor would not lead to danger of electric shock.

•Class X capacitors are divided into subclasses according to the peak impulse test voltage superimposed on the main voltage

Note 5

AC Leakage Current:

•For all Series (except 125L) - AC Leakage Current (mA) specified at 250 Vrms, 60 Hz.

•For 125L Series - AC Leakage Current (mA) specified at 125 Vrms, 60Hz.

Note 6

Alternate Lead Spacings of 7.5mm and 10mm are available bulk or tape & reel.

•European Required Minimum Lead Clearance (Prevents Use of Inside Crimp) .315" (8mm) on 440L Series; 0.118" (3mm) on all other series.

www.vishay.com	[e-mail]	Document Number: 23092
20		Revision 14-May-02