AUDIO MONITOR SPEAKER SYSTEM
AMS-100
ANALOG MODULE
BKAM-101
AES/EBU MODULE
BKAM-102
SDI MODULE
BKAM-103
INSTALLATION MANUAL 1st Edition
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres. Pour toute réparation faire appel à une personne compétente uniquement.
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit 3. Internal air ambient temperature of the rack
When this product is installed in a rack and is supplied power from an outlet on the rack, please make sure that the rack does not overload the supply circuit.
When this product is installed in a rack, please make sure that the internal air ambient temperature of the rack is within the specified limit of this product.
2.Providing protective earth
When this product is installed in a rack and is supplied power from an outlet on the rack, please confirm that the outlet is provided with a suitable protective earth connection.
AMS-100 (SY) |
Serial No. 10001 and Higher |
BKAM-101 (SY) |
Serial No. 10001 and Higher |
BKAM-102 (SY) |
Serial No. 10001 and Higher |
BKAM-103 (SY) |
Serial No. 10001 and Higher |
4.Prevention against achieving hazardous condition due to uneven mechanical loading
When this product is installed in a rack, please make sure that the rack does not achieve hazardous condition due to uneven mechanical loading.
Table of Contents
1. |
Installation |
|
|
1-1. |
Power Supply ........................................................................................ |
1-1 (E) |
|
|
1-1-1. |
Power Specifications ............................................................ |
1-1 (E) |
|
1-1-2. |
Power Cord ........................................................................... |
1-1 (E) |
1-2. |
Dimensions ............................................................................................ |
1-2 (E) |
|
1-3. |
Installation of Boards ............................................................................ |
1-2 (E) |
|
1-4. |
Rack Mounting ...................................................................................... |
1-3 (E) |
|
1-5. Pin Assignment of Connectors .............................................................. |
1-4 (E) |
||
1-6. Matching Connectors and Cables .......................................................... |
1-5 (E) |
||
1-7. |
Internal Switches ................................................................................... |
1-5 (E) |
|
|
1-7-1. |
AL-42 Board (BKAM-101) ................................................. |
1-5 (E) |
|
1-7-2. |
SDI-43 Board (BKAM-103) ................................................ |
1-5 (E) |
1-8. Input Level Meter Adjustment ............................................................. |
1-6 (E) |
||
1-9. |
Related manuals .................................................................................... |
1-6 (E) |
|
Section 1
Installation
1-1. Power Supply
1-1-1. Power Specifications
Power voltage |
AC 100 to 240 V ± 10 % |
|
Current consumption |
25 |
W |
Inrush current |
20 |
A |
1-1-2. Power Cord
w
Use the specified power cord only when connecting. Never use a injured power cord.
n
Ground the unit safely.
If the unit is used in the area except above, please consult with local Sony’s sales/service office.
Power code for the customer in the U.S.A.and Canada.
1 Power cord (approx. 2.4 m) |
!1-557-377-11 |
|
|
|
|||||||||||||||||||
2 Plug holder (Black) |
2-990-242-01 |
|
|
|
|||||||||||||||||||
1 |
|
|
|
|
|
2 |
|
|
|
|
|
|
|
AC inlet |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power code for the customer in the United Kingdom.
1 Power cord set (approx. 2.4 m) |
! DK-2401 (UK) |
2 Plug holder (Black) |
2-990-242-01 |
Plug holder is supplied with DK-2401 (UK).
1 |
2 |
|
|
|
|
|
|
|
|
|
|
|
AC inlet |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power code for the customer in Europe except the United
Kingdom. |
! DK-2401 (AE) |
1 Power cord set (approx. 2.4 m) |
|
2 Plug holder (Black) |
2-990-242-01 |
Plug holder is supplied with DK-2401 (AE).
1 |
2 |
|
|
|
|
|
|
|
|
|
|
|
AC inlet |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AMS-100 |
1-1(E) |
Loading...