Sharp PC865, PC875, PC895 Datasheet

PC865 Series

PC865 Series

■Features

1.Low collector dark current

( ICEO : MAX. 10 μ A at VCE = 24V, Ta = 85˚C )

2.High current transfer ratio

( CTR : MIN. 1 000% at I F = 1mA, V CE = 2V)

3.High collector-emitter voltage ( VCEO : 70V)

4.High isolation voltage between input and output ( Viso : 5 000V rms )

5.Compact dual-in-line package

PC865 ( 1-channel ) PC875 (2-channel )

PC895 (4-channel )

6. Recognized by UL, file No. E64380

High Sensitivity, Low Collector Dark

Current, High Collector-emitter

Voltage Type Photocoupler

■ Applications

1.Programmable controllers

2.System appliances, measuring instruments

3.Copiers, automatic vending machines

4.Signal transmission between circuits of different potentials and impedances

■ Outline Dimensions																							(Unit : mm )
PC865		mark	2.54± 0.25			Internal connection						PC895			Internal connection
			4	3		diagram
		Anode		PC865				4		3					diagram
					0.5									16	15	14	13	12	11	10	9
					±
					6.5
			1	2 0.9 ± 0.2				1		2
				1.2 ± 0.3
								7.62 ± 0.3
			4.58 ± 0.5											1	2	3	4	5	6	7	8
TYP.		± 0.5
																2.54 ± 0.25
		3.5
0.5						± 0.5		0.26 ± 0.1					mark	16	15	14	13	12	11	10	9
		0.5
		±		0.5 ± 0.1		2.7	θ				θ		Anode
		3.0						θ = 0 to 13 ˚									PC895				± 0.5
		1	Anode			3		Emitter													6.5
		2	Cathode			4		Collector
PC875					± 0.25			Internal connection						1	2	3	4	5	6	7	8
				2.54				diagram
	mark	8		7	6	5
								8	7	6	5				0.9 ± 0.2
	Anode					0.5									1.2 ± 0.3
				PC875
						±
						6.5											19.82 ± 0.5						7.62 ± 0.3
		1		2	3	4		1	2	3	4	TYP.	± 0.5
				0.9 ± 0.2
				1.2 ± 0.3						7.62 ± 0.3		0.5	3.5
	± 0.5			9.66 ± 0.5									± 0.5								± 0.5		0.26 ± 0.1
TYP.
						0.5±																	θ = 0 to 13 ˚
0.5	3.5					2.7				0.26 ± 0.1			3.0		0.5 ± 0.1						2.7	θ		θ
	± 0.5
																					1 3 5 7	Anode
	3.0		0.5 ± 0.1					θ				θ
									θ = 0 to 13 ˚												2 4 6 8	Cathode
		1 3	Anode		5 7	Emitter															9 11 13 15 Emitter
		2 4	Cathode		6 8	Collector															10 12 14 16 Collector

“In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”

PC865 Series

■ Absolute Maximum Ratings		(Ta = 25 ˚C)
Parameter	Symbol	Rating	Unit
Forward current	IF	50	mA
*1Peak forward current	I FM	1	A
Input	V R	6	V
Reverse voltage
Power dissipation	P	70	mW
Collector-emitter voltage	V CEO	70	V
Emitter-collector voltage	V ECO	0.1	V
Output	IC	80	mA
Collector current
Collector power dissipation	P C	150	mW
Total power dissipation	P tot	200	mW
*2Isolation voltage	V iso	5 000	V rms
Operating temperature	T opr	- 30 to + 100	˚C
Storage temperature	T stg	- 55 to + 125	˚C
*3Soldering temperature	T sol	260	˚C
*1 Pulse width <= 100μ s, Duty ratio : 0.001
*2 40 to 60 % RH, AC for 1 minute
*3 For 10 seconds

■ Electro-optical Characteristics									(Ta = 25 ˚C)
	Parameter		Symbol	Conditions			MIN.	TYP.	MAX.	Unit
	Forward voltage		V F	IF = 20mA			-	1.2	1.4	V
Input	Reverse current		IR	V R = 4V			-	-	10	μ A
	Terminal capacitance		Ct	V= 0, f = 1kHz			-	30	250	pF
Output	Collector dark current		ICEO	V CE = 24V		Ta = 25 ˚C	-	-	2 x 10 - 7	A
				IF = 0		Ta = 85 ˚C	-	-	10 - 5	A
	Current transfer ratio		CTR	IF = 1mA, V CE = 2V			1 000	-	8 000	%
	Collector-emitter saturation voltage		V CE( sat )	IF = 20mA, I C = 5mA			-	0.8	1.0	V
Transfer	Isolation resistance		R iso	DC500V, 40 to 60 % RH			5 x 1010	1011	-	Ω
charac-	Floating capacitance		Cf	V= 0, f = 1MHz			-	0.6	1.0	pF
teristics	Cut-off frequency		fC	VCE = 2V, I C = 2mA, R		L = 100 Ω, - 3dB	1	6	-	kHz
	Response time	Rise time	t r	V CE = 2V, I C = 10mA			-	100	300	μ s
		Fall time	tf	RL = 100 Ω			-	35	200	μ s