High Resolution WDR
Vandal-Resistant Dome Camera
User Manual |
SCV-5083 |
|
|
High Resolution WDR Vandal-Resistant Dome Camera
User Manual
Copyright
©2014 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
•If the system behaves abnormally because you run a program irrelevant to the system operation.
•Deteriorated performance or natural worn-out in process of time
Design and specifications are subject to change without prior notice.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.
■ SCV-5083 SERIES
• NTSC MODEL • PAL MODEL SCV-5083N SCV-5083P
■MODEL DESCRIPTION
• SCV-5083X_
SIGNAL SYSTEM
•SIGNAL SYSTEM
N → NTSC MODEL P → PAL MODEL
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTSINSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
•To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
•To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
WARNING
1.Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product.
2.Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to the product.
3.Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire.
4.Securely plug the power cord into the power receptacle. insecure connection may cause fire.
5.When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.
_ safety information
6. |
Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers |
orfationm |
|
|
filled with water on top of the camera. doing so may cause personal injury due to fire, electric |
|
|
|
|
|
|
|
shock, or falling objects. |
tyin |
|
7. |
Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric |
|
|
|
|
||
|
shock. |
safe● |
|
|
|
||
8. |
If any unusual smells or smoke come from the unit, stop using the product. in such case, |
|
|
|
|
||
|
immediately disconnect the power source and contact the service center. continued use in |
|
|
|
such a condition may cause fire or electric shock. |
|
|
9. |
If this product fails to operate normally, contact the nearest service center. never disassemble |
|
|
|
or modify this product in any way. (samsung is not liable for problems caused by unauthorized |
|
|
|
modifications or attempted repair.) |
|
|
10.When cleaning, do not spray water directly onto parts of the product. doing so may cause fire or electric shock.
CAUTION
1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference.
2.Do not install in a location subject to high temperature (over 55°C), low temperature (below -10°C), or high humidity. Doing so may cause fire or electric shock.
3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
4.Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or damage to the product.
5.Keep out of direct sunlight and heat radiation sources. It may cause fire.
6.Install it in a place with good ventilation.
7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CMOS image sensor.
8.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10.Do not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.
English_
safety information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
1)This device may not cause harmful interference, and
2)This device must accept any interference received including interference that may cause undesired operation.
CAUTION
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice, pursuanttopart15ofFCCRules.Theselimitsaredesignedtoprovidereasonableprotection against harmful interference when the equipment is operated in a commercial environment. Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalled and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
_ safety information
important safety instructions
1. |
Read these instructions. |
orfationm |
|
2. |
Keep these instructions. |
|
|
|
|
||
3. |
Heed all warnings. |
tyin |
|
4. |
Follow all instructions. |
|
|
5. |
Do not use this apparatus near water. |
safe● |
|
6. |
Clean only with dry cloth. |
|
|
|
|
||
7. |
Do not block any ventilation openings. Install in accordance with the manufacturer’s |
|
|
|
instructions. |
|
|
8. |
Do not install near any heat sources such as radiators, heat registers, or other apparatus |
|
|
|
(including amplifiers) that produce heat. |
|
|
9. |
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug |
|
|
|
has two blades with one wider than the other. A grounding type plug has two blades and |
|
|
|
a third grounding prong. The wide blade or the third prong is provided for your safety. If |
|
|
|
the provided plug does not fit into your outlet, consult an electrician for replacement of the |
|
|
|
obsolete outlet. |
|
|
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience |
|
||
|
receptacles, and the point where they exit from the apparatus. |
|
|
11.Only use attachments/accessories specified by the manufacturer. |
|
|
|
12.Use only with cart, stand, tripod, bracket, or table specified by |
the |
|
|
|
manufacturer, or sold with the apparatus. |
|
|
13.Unplug this apparatus when a card is used. Use caution when moving the |
|
||
|
cart/ apparatus combination to avoid injury from tip-over. |
|
|
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus |
|
||
|
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has |
|
|
|
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to |
|
|
|
rain or moisture, does not operate normally, or has been dropped. |
|
|
|
Apparatus shall not be exposed to dripping or splashing and no objects |
|
|
|
filled with liquids, such as vases, shall be placed on the apparatus |
|
|
|
Samsung Techwin cares for the environment at all product manufacturing |
|
|
|
stages to preserve the environment, and is taking a number of steps to provide |
|
|
|
customers with more environment-friendly products.The Eco mark represents |
|
|
|
Samsung Techwin’s will to create environment-friendly products, and indicates |
|
|
|
that the product satisfies the EU RoHS Directive. |
|
|
English_
contents
introduction
9
Installation
12
connection
16
camera operation
19
troubleshooting
35
specifications
36
9 |
Features |
10 |
Components and Accessories |
11 |
COMPONENT NAMES AND |
|
FUNCTIONS |
12 |
Before installation |
12 |
Installation |
15 |
Adjusting the monitoring |
|
direction for the camera |
16 |
Connecting to Monitor |
16 |
Connecting to Power |
17 |
Using Coaxial Communications |
19 |
Menu Configuration |
19 |
Menu Setup |
35Troubleshooting
36Specifications
38Dimension
_ contents
introduction
Features
High Resolution
Use of a 1.4 mega pixel CMOS device provides clear pictures with a horizontal resolution of 1000.
Excellent Sensitivity
The built-in high sensitivity COLOR CMOS produces a clear image. - Color : 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE)
0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.2, 30IRE) B/W : 0.003Lux (F1.2, 50IRE), 0.0001Lux (1sec, F1.2, 50IRE)
0.001Lux (F1.2, 30IRE), 0.00003Lux (1sec, F1.2, 30IRE)
Intelligence
Without an external sensor, you can use this product to detect motion and generate alarms and thus more efficient monitoring can be achieved.
SSNR4 (Samsung Super Noise Reduction) Function
High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place.
Day&Night
This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions. The COLOR mode operates in daytime conditions to provide optimum colors, and B/W mode operates in night-time conditions to enhance the definition of the image.
SSDR (Samsung Super Dynamic Range)
If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
PROFILE
You can set a mode according to the camera installation conditions. - BASIC, DAYNIGHT, BACKLIGHT, ITS, INDOOR, USER
WDR
By adopting a proprietary W7 chip, the camera delivers clear, high quality pictures even in backlight, by increasing exposure in dark areas while decreasing it in bright areas; a corrected image with clear details results.
DIS (Digital Image Stabilizer)
The DIS function compensates for any camera movement, to produce more stable pictures.
introduction ●
English_
introduction
Miscellaneous Functions
HLC(High Light Compensation), REVERSE , D-ZOOM, SHARPNESS and PRIVACY functions are provided.
Communication
Coaxial communication methods are supported.
-Coaxial Communications : Pelco Coaxitron
OSD
The camera’s OSD is complimented by 17 languages.
-English, Chinese, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
Components and Accessories
Check if the following items are included in the product package.
o Gy G~kyG
} Ty Gk Gj
Quick Manual |
SCV-5083 |
SCV-5083 |
Quick Manual |
Screws |
Video Output Cable |
Template |
Wrench |
10_ introduction
COMPONENT NAMES AND FUNCTIONS
2
3 |
4 |
|
1
7
8
SET
VIDEO
5
6
1 Dome Cover |
2 Shield Case |
3 Rotate base : control rotating angle of camera. |
|
Vari-focal Lens Module : 2.8 ~ 10.5mm (F1.2).
5 Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.
6 Video Output Terminal to Monitor
7 Pan Base : Control panning angle of camera.
8 Power Input Connector
9 Ground Terminal
D & N Input Terminal : You can switch to Day & Night Mode by connecting an external signal to this terminal.
MD Output Terminal: Motion detection signals are output through this terminal.
Video Output Jack : Video signals are output through this port. Connect this port to the Video IN port of a monitor.
introduction ●
English_11
Installation
BEFORE INSTALLATION
Ensure you read out the following instructions before installing the camera:
You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire.
Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
When installing your camera, don’t allow any person to approach the installation site.
INSTALLATION
Disassembling
Using the L-wrench provided, loosen
3 screws by turning them counterclockwise and separate the dome cover.
Dome Cover
FRONT
TOP
12_ Installation
Loading...