SAMSUNG PS50A676, PS50A676T1, PS50A676T1M, PS50A676T1W, PS58A676 User Manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

	Country	Customer Care Centre	Web Site
	AUSTRIA	0800-SAMSUNG(726-7864)	www.samsung.com/at
	BELGIUM	0032 (0)2 201 24 18	www.samsung.com/be
		844 000 844	www.samsung.com/cz
	CZECH REPUBLIC	Distributor pro Českou republiku:
		Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
	DENMARK	70 70 19 70	www.samsung.com/dk
	EIRE	0818 717 100	www.samsung.com/ie
	ESTONIA	800-7267	www.samsung.ee
	FINLAND	030-6227 515	www.samsung.com/fi
	FRANCE	"3260 SAMSUNG (€ 0,15/Min)	www.samsung.com
		08 25 08 65 65 (€ 0,15/Min)"
	GERMANY	01805 - SAMSUNG(726-7864 € 0,14/Min)	www.samsung.com
	HUNGARY	06-80-SAMSUNG(726-7864)	www.samsung.com
	ITALIA	800-SAMSUNG(726-7864)	www.samsung.com
	KAZAKHSTAN	8-10-800-500-55-500	www.samsung.kz
	KYRGYZSTAN	00-800-500-55-500	-
	LATVIA	800-7267	www.samsung.com/lv
	LITHUANIA	8-800-77777	www.samsung.lt
	LUXEMBURG	0035 (0)2 261 03 710	www.samsung.com/be
	NETHERLANDS	0900-SAMSUNG (726-7864 € 0,10/Min)	www.samsung.com/nl
	NORWAY	815-56 480	www.samsung.com/no
	POLAND	"0 801 801 881	www.samsung.com/pl
		022-607-93-33"
	PORTUGAL	80820-SAMSUNG(726-7864)	www.samsung.com/pt
	RUSSIA	8-800-555-55-55	www.samsung.com
	SLOVAKIA	0800-SAMSUNG(726-7864)	www.samsung.com/sk
	SPAIN	902 10 11 30	www.samsung.com
	SWEDEN	0771-400 200	www.samsung.com/se
	SWITZERLAND	0800-SAMSUNG(726-7864)	www.samsung.com/ch
	TURKEY	444 77 11	www.samsung.com
	TADJIKISTAN	8-10-800-500-55-500	-
	U.K	0845 SAMSUNG (7267864)	www.samsung.com
	UKRAINE	8-800-502-0000	www.samsung.com
	UZBEKISTAN	8-10-800-500-55-500	www.samsung.uz

BN68-01704A-00

Plasma TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model

Serial No.

User Instructions

Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there.

Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Avoid operating the TV at temperatures below 5°C(41°F)

A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Warranty

-Warranty does not cover any damage caused by image retention.

-Burn-in is not covered by the warranty.

Installation

Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.

© 2008 Samsung Electronics Co., Ltd. All rights reserved.

English - 2

Contents
General Information
User Instructions.............................................	2
Checking Parts................................................	4
Using the Stand-Base.....................................	4
Control Panel .................................................	5
Connection Panel............................................	6
Viewing the Remote Control ...........................	8
Operation
Switching Your Television On and Off .............	9
Viewing the Menus..........................................	9
Plug & Play Feature......................................	10
Using the TOOLS Button ..............................	12
Viewing External Signal Sources..................	12
Editing Device Names...................................	13
Channel Control
Storing Channels Automatically ....................	14
Storing Channels Manually...........................	15
Viewing the EPG (Electronic Programme
Guide) Information .......................................	16
Viewing All Channels ....................................	17
Erasing and Adding Channels.......................	18
Setting Your Favourite Channels ..................	19
Reserving a Program (Time Viewing) ...........	20
Confirming a Viewing Reservation................	21
Assigning Names to Channels......................	22
Sorting the Stored Channels - Analogue.......	23
Selecting and Deselecting All Channels .......	24
Storing Channels in Memory (Auto Store) ....	24
Setting the Channel Mode ............................	24
Locking Channels .........................................	25
Fine Tuning Analogue Channels...................	25
Viewing Signal Information ...........................	26
LNA (Low Noise Amplifier) ............................	26
Picture Control
Changing the Picture Standard.....................	27
Customizing the Picture Settings..................	27
Configuring Detailed Settings on the Picture 28
Picture Options .............................................	29
Resetting the Picture Settings to the Factory
Defaults.........................................................	31
Sound Control
Sound Features ............................................	32
Selecting the Sound Mode
(depending on the model).............................	34
Connecting Headphones (Sold separately) ..	34

Symbols

Press

		English
Function Description
Time Features...............................................	35

Language / Change PIN / Parental Lock / Subtitle / Teletext Language / Preference /

Light Effect / Melody/ Entertainment /
Energy Saving / PIP .....................................	36
Upgrading the Software ................................	39
Common Interface ........................................	40
PC Display
Setting up Your PC Software
(Based on Windows XP)...............................	41
Input Mode (PC)............................................	42
Setting the PC...............................................	43
WISELINK
Using the WISELINK Function......................	45
Using the Photo List......................................	46
Viewing a Photo or Slide Show.....................	52
Using the Music List......................................	56
Playing a Music File......................................	61
Using the Setup Menu ..................................	63
About Anynet+
What is Anynet+?..........................................	64
Connecting Anynet+ Devices........................	64
Setting Up Anynet+.......................................	65
Scanning and Switching between
Anynet+ Devices...........................................	65
Recording......................................................	66
Listening through a Receiver ........................	67
Check Points before Requesting Service .....	67
Appendix
Teletext Feature (depending on the model)..	68
Wall Mount Kit Specifications (VESA)...........	70
Auto Wall - mount adjustment
(Sold separately)...........................................	71
Preparing before installing Wall-Mount
on the wall.....................................................	72
How to assemble the Stand-Base
(depending on the model).............................	72
Troubleshooting ............................................	73
Specifications................................................	74

↓

Important Note

English - 3

Checking Parts

Owner’s Instructions	Remote Control/	Power Cord	Cloth-Clean	Warranty Card/
	AAA Batteries			Safety Guide Manual
				(Not available in all
				locations)

Cover-Bottom / Screws (2ea)	Ferrite Core for	Ferrite Core for	Ferrite Core for
(Refer to page 71)	Power Cord	S-Video	Component

Sold Separately

Antenna Cable

Component Cables

Audio Cables

PC Cable

Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable

↓ Ferrite Core (Power Cord, S-Video, Component)

The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.

Using the Stand-Base

↓ Two or more people should carry the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always keep the PDP upright.

	The PDP can rotate 20
	degrees in right and left	-20° ~ 20°
	directions.

English - 4

Control Panel

Front Panel

↓ The product colour and shape may vary depending on the model.

Front Panel buttons

Touch each button to operate.

1SOURCE

Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC,

HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB).

↓In the on-screen menu, use this button as you would use the ENTER button on the

remote control.

2MENU

Press to see an on-screen menu of your TV’s features.

3– +

Press to increase or decrease the volume. In the on-screen menu, use the – + buttons as you would use the ◄ and ► buttons on the remote control.

4

Press to change channels.

In the on-screen menu, use the buttons as you would use the ▲ and ▼ buttons on the remote control.

5Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

6 POWER

Press to turn the TV on and off.

7Remote Control Sensor

Aim the remote control towards this spot on the TV.

8 Speakers

English - 5

Connection Panel

Rear Panel

1

9 or

Cable Television

Network

or

2	3	4	5	6	7	8

↓ The product colour and shape may vary depending on the model.

Whenever you connect an audio or video system to your set, ensure that all elements are switched off.

When connecting an external device, match the colour of the connection terminal to the cable.

1POWER IN

Connect the supplied power cord.

2COMPONENT IN

Audio (AUDIO L/R) and video (Y/PB/PR) inputs for Component.

3PC IN(PC) / AUDIO

Connect to the video and audio output jack on your PC.

4EXT 1, EXT 2

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

Input/Output Specification

	Connector		Input		Output
		Video	Audio(L/R)	RGB	Video + Audio(L/R)
	EXT 1				Only TV or DTV
					output is available.
	EXT 2				Output you can
					choose.

5DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

6AUDIO OUT(AUDIO R/L)

Connect RCA audio signals from the TV to an external source, such as Audio equipment.

7SERVICE

−Connector for service.

−Connect the serial jack between the electro-motion wall mount bracket and your TV when you want to adjust the TV viewing angle using your remote control.

Continued...

English - 6

8 HDMI IN 1, 2, 3	DVI IN(HDMI2) AUDIO L/R
- No additional Audio connection is needed	DVI audio outputs for external devices.
for an HDMI to HDMI connection.	9 ANT IN
- When using an HDMI/DVI cable connection,
you must use the HDMI IN 2 jack.	75Ω Coaxial connector for Aerial/Cable
↓ What is HDMI?	Network.
- “High Definition Multimedia interface”	Supported modes for HDMI/DVI and Component
allows the transmission of high definition		480i	480p	576i	576p	720p 1080i 1080p
digital video data and multiple channels
of digital audio.	HDMI/DVI 50Hz	X	X	X	O	O	O	O
- The HDMI/DVI terminal supports DVI	HDMI/DVI 60Hz	X	O	X	X	O	O	O
connection to an extended device with	Component	O	O	O	O	O	O	O
the appropriate cable (not supplied). The
difference between HDMI and DVI is that
the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and
supports multi - channel digital audio.
Side Panel
					1

4

2

3

4

or

5

↓ The product colour and shape may vary depending on the model.

1COMMON INTERFACE Slot

Insert CI (Common Interface) card into the slot. (refer to page 40)

−When ‘CI Card’ isn’t inserted in some channels, “Scramble Signal” is displayed on the screen.

−The pairing information containing a telephone number, CI CARD ID, Host ID,and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

−When the channel information configuration has finished, the message “Updating Completed” is displayed, indicating that the channel list is now updated.

↓Insert the CI-Card in the direction marked on it.

2HDMI IN 4

Connect to the HDMI jack of a device with HDMI output.

3WISELINK

Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3).

4S-VIDEO or VIDEO / AUDIO L/R

Video (S-Video or Video) and audio inputs for external devices, such as a camcorder or VCR.

5HEADPHONES JACK

You can connect a set of headphones if you wish to watch a television programme without disturbing the other people in the room.

↓Prolonged use of headphones at a high volume may damage your hearing.

English - 7

Viewing the Remote Control

The performance of the remote control may be affected by bright light.

1POWER button

(turns the TV on and off)

2Selects the TV and DTV mode directly

3Number buttons for direct channel access

4One/Two-digit channel selection

5 Temporary sound switch-off

6 Volume increase

Volume decrease

7Electronic Program Guide (EPG) display

8Use to quickly select frequently used functions.

9Control the cursor in the menu

0Use to see information on the current broadcast

!Use these buttons in the Channel list and WISELINK, etc.

#Press to select the optional display and sound modes for sports, cinema and games.

$VCR/DVD Function (Rewind, Stop, Play/Pause, Fast/ Forward)

% ON/OFF

Press to backlight the buttons on the remote. This function is convenient for using at night or when the room is dark. (Using the remote control with the ON/OFF() light button set to On will reduce the battery usage time.

^ Previous channel

& Next channel

Previous channel

* Available source selection

(Displays the main on-screen menu

)This function enables you to view and play photo (JPEG) and audio files (MP3) from an external device. (See page 46 (JPEG), 56 (MP3))

aReturns to the previous menu

b Exit the on-screen menu c Picture size selection

d Use this when connecting a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode.(The DMA button is optional.)

For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-CEC)" is “On” (see page 65)

e Digital subtitle display

f Channel control button (Refer to page 17~19)

Teletext Functions

(Refer to page 68)

2 Exit from the teletext display (depending on the model)

7 Teletext store

8 Teletext size

0 Teletext reveal

! Fastext topic selection

@Teletext display/mix both teletext information and the normal broadcast

^ Teletext sub page

&P :Teletext next page P :Teletext previous

page

*Teletext mode selection (LIST/FLOF)

( Teletext index a Teletext hold b Teletext cancel

Continued...

English - 8

Installing Batteries in the Remote Control

1Lift the cover at the back of the remote control upward as shown in the

figure.

2 Install two AAA size batteries.

↓ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

Using the remote control with the ON/OFF() light button set to On will reduce the battery usage time.

3Close the cover as shown in the figure.

↓Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

↓If the remote control doesn’t work! Check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4.Is there a power cut, or is the power cord unplugged?

5.Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The mains lead is attached to the rear of the television.

1Plug the mains lead into an appropriate socket.

↓The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2Press the (Power) button (On/Off) on the front of the television or press the POWER button on the remote control to switch the television on. The channel that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on page 15.

↓If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Plug & Play Feature” on page 10.

3To switch the television off, press the (Power) button (On/Off) on the front of the television or press the POWER button on the remote control.

4To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER button or number buttons on the remote control.

Viewing the Menus

1Press the MENU button.

The main menu is displayed on the screen.

Its left side has six icons: Picture, Sound, Channel, Setup, Input, and Application

2Press the ▲ or ▼ button to select one of the icons. Press the ENTER button to access the icon’s sub-menu.

3Press the ▲ or ▼ button to move to items in the menu. Press the ENTER button to enter items in the menu.

4Press the ▲/▼/◄/► button to change the selected items. Press the RETURN button to return to the previous menu.

5Press the EXIT button to exit from the menu.

Picture

Mode

: Standard

Cell Light

: 7

Contrast

: 95

Brightness

: 45

Sharpness

: 50

Colour

: 50

Tint (G/R)

: G50/R50

Detailed Settings

English - 9

Plug & Play Feature

When the television is initially powered on, several basic customer settings proceed automatically and subsequently.The following settings are available.

If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed.

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.

↓The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.

1If the television is in standby mode, press the POWER button on the remote control. The message Les menus Langue, Enr. démo, Canaux et Heure seront définis. is displayed.

2Press the ENTER button, Select the OSD Language menu is automatically displayed. Press the ENTER button.

3Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. The message Select ‘Home Use’ when installing this TV in your home. is displayed.

4Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER button. The message to

check the connected status of the antenna is displayed. ↓The default selection is Home Use.

↓We recommend setting the TV to Home Use mode

for the best picture in your home environment. ↓Store Demo mode is only intended for use in retail

environments.

↓If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

Plug & Play

Les menus Langue, Enr. démo, Canaux et Heure seront définis.

OK

Entrer

Plug & Play

Select the OSD Language	▲
	Nederlands
Menu Language	: English
	Soumi
	▼
	Move	Enter

Plug & Play

Select 'Home Use' when installing this TV in your home.

	Store Demo	Home Use
		Move	Enter
	Plug & Play
	Select the channel source to memorize.
	Digital &Analogue		Start
	Digital		Start
	Analogue		Start
	Move	Enter		Skip

	Plug & Play
5 Press the ▲ or ▼ button to select the channel source to	Auto Store in progress.	Channel 6
	Digital Channels : 0
memorize. Press the ENTER button to select Start.	Analogue Channels : --
Digital & Analogue: “Digital” and “Analogue” channels.					1%
Digital: “Digital” channels.
Analogue: “Analogue” channels.
		Stop
The channel search will start and end automatically.
Press the ENTER button at any time to interrupt the		Enter				Skip
memorization process.

After all the available channels are stored, the message Set the Clock Mode is displayed.

Continued...

English - 10

↓To stop the search before it has finished, press the ENTER button with stop selected.

Press the ◄ or ► button to select Yes, then press the ENTER button. The Auto Store menu then reappears. Press the ENTER button when channel memorization is completed.

6The message Set the Clock Mode is displayed. Press the ENTER button. Press the ▲ or ▼ button to select Manual for setting the current time manually, then press the ENTER button. The message Set current date and time. is displayed.

↓If you select Auto, the message Enjoy your viewing is displayed. If you have received a digital signal, the time will be set automatically.

7Press the ◄ or ► button to move to Day, Month, Year, Hour or Minute. Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER button.

↓You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control.

8The message Enjoy your viewing. is displayed. When you have finished, press the ENTER button.

↓Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.

If you want to reset this feature …

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Setup, then press the ENTER button.

3Press the ENTER button again to select Plug & Play.

4Enter your 4 digit PIN number. The default PIN number of a new TV set is “0-0-0-0”.

↓For further details on setting up options, refer to the pages 10-11.

↓The Plug & Play feature is only available in the TV mode.

Plug & Play

Auto Store is completed.

Digital channels: 20

Analogue channels: 36

OK

Enter				Skip

Plug & Play

Set the Clock Mode.

Clock Mode

: Auto

Manual

Move Enter Skip

Plug & Play

Set current date and time
Day	Month	Year
01	01	2008
Hour	Minute
00	00

	Move	Adjust	Enter	Skip
		Plug & Play
		Enjoy your viewing.
		OK
Setup	Plug & Play			►
	Language		: English
	Time
	Change PIN
	Parental Lock
	Subtitle
	Teletext Language		: ----
	Preference

Plug & Play

The Menu Language, Store Demo, Channels and Time will be set.

0~9 Enter PIN Return

English - 11

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “TOOLS” menu changes depending on which external input mode you are viewing.

1Press the TOOLS button.

The Tools menu will appear.

2Press the ▲ or ▼ button to select a menu, then press the ENTER button.

3Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items.

For a more detailed description of each function, refer to the corresponding page.

•Device List, see page 65

•Picture Mode, see page 27

•Sound Mode, see page 32

•Sleep Timer, see page 35

•SRS TS XT, see page 32

•Energy Saving, see page 38

•Dual I II, see page 34

•PIP, see page 38

•Auto Adjustment, see page 43

Tools

Device List
Picture Mode	: Standard
Sound Mode	: Standard
Sleep Timer	:	Off
SRS TS XT	:	Off
Energy Saving	:	Off
Dual I II	:	Mono
	Move	Enter	Exit

Viewing External Signal Sources

You can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box, and the TV source.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Input, then press the ENTER button.

3Press the ENTER button again to select Source List.

4Press the ▲ or ▼ button to select the signal source, then press the ENTER button.

Available signal sources: TV,Ext1,Ext2, AV, S-Video,

Component, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB

↓You can choose only those external devices that are connected to the TV.

↓Using the Color buttons on the remote with the Source list.

• Red (Refresh): Refreshes the connecting external devices.

• (Option): Displays the Edit Name and Information menus.

Input	Source List
	Edit Name

TV

Ext.1	----
Ext.2	----
AV	----
S-Video	----
Component	----
PC	----

Refresh Option

↓ You can select these options simply by pressing the SOURCE button on the remote control.

↓ To watch television programme again, press the TV/DTV button and select the channel number required.

English - 12

Editing Device Names

You can give a name to the external source.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Input, then press the ENTER button.

3Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.

4Press the ▲ or ▼ button to select the external source to be edited, then press the ENTER button.

5Select the required device by pressing ▲ or ▼, then press the ENTER button.

Available device names: VCR, DVD, Cable STB, Satellite

STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV, IPTV, Blu-Ray, HD DVD, Digital Media Adapter.

6Press the EXIT button to exit.

	Source List
Input	Edit Name	►

Edit Name

	Ext.1	: ----		►
	Ext.2	: ----
	AV	: ----
	S-Video	: ----
	Component	: ----
	PC	: ----
	HDMI1	: ----
	Move		Enter	Return
	Edit Name
	Ext 1	:	----
	Ext 2	:	VCR
	AV	:	DVD
	S-Video	:	Cable STB
	Component	:	Satellite STB
	PC	:	PVR STB
	HDMI1	:
	Move		Enter	Return

English - 13

Storing Channels Automatically

You can scan for the frequency ranges available to you (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3Press the ▲ or ▼ button to select Auto Store, then press the ENTER button.

4Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER button to select Start.

↓Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels. Analogue: “Analogue” channels.

↓Scans for all channels with active broadcast stations and stores them in the TV’s memory.

↓If you want to stop Auto Store, press the ENTER button.

The Stop Auto Store? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTER button.

5Press the EXIT button to exit.

↓When there is a locked channel by Channel Lock setting, PIN input screen appears. (refer to page 25)

Channel	Auto Store		►
	Manual Store
	Full Guide
	Mini Guide
	Default Guide	: Mini Guide
	Channel List
	Channel Mode	:Added Channels
	Child Lock	: On
	Auto Store
Select the channel source to memorize.
	Digital &Analogue		Start
	Digital		Start
	Analogue		Start
	Move	Enter	Return
	Auto Store
Auto Store is progress.		Channel 6
Digital Channels : 0
Analogue Channels : --
			4%
	Stop
		Enter	Return

Plug & Play

Auto Store is incomplete.

Digital channels: 20

Analogue channels: 36

OK

Enter				Skip

English - 14

Storing Channels Manually

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3Press the ▲ or ▼ button to select Manual Store, then press the ENTER button.

4Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

5 When you are satisfied with your setting, press the ENTER button.

6Press the EXIT button to exit.

Digital Channel

Channel

Press the ▲, ▼ or numeric buttons (0~9) to select a channel. The available channels are 5~69. The corresponding frequency for the selected channel is automatically set

Frequency

You can specify the frequency (KHz) using the numeric buttons (0~9). If you do not know the exact frequency, follow the above step to select the frequency automatically using channel.

Bandwidth

Press the ▲ or ▼ button to select a bandwidth. The available bandwidths are 7 and 8 MHz.

Analogue Channel

Channel

Channel

Auto Store
Manual Store	►
Full Guide
Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	:Added Channels
Child Lock	: On
Fine Tune
Auto Store
Manual Store	Digital Channel
Full Guide	Analogue Channel
Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	:Added Channels
Child Lock	: On
Fine Tune

Programme (Programme number to be assigned to a channel)

Press the ▲ or ▼ button until you find the correct number.

↓You can also select the channel number directly by pressing the numeric buttons (0~9).

Colour System: Auto/PAL/SECAM/NTSC4.43

Press the ▲ or ▼ button to select the required colour standard.

Sound System: BG/DK/I/L

Press the ▲ or ▼ button to select the required sound standard.

Channel (When you know the number of the channel to be stored) Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

Press the ► button, then press the ▲ or ▼ button to select the required number.

Manual Store

Channel	Frequency	Bandwidth
5	178750 KHz	8 MHz

Move

Adjust

Search

Return

Manual Store

Programme		Colour System	Sound System
	1	AUTO	BG
Channel		Search	Store
C	--	40 MHz	?

Move Adjust Return

↓You can also select the channel number directly by pressing the numeric buttons (0~9).

↓If there is abnormal sound or no sound, re-select the sound standard required.

Search (When you do not know the channel numbers) Press the ▲ or ▼ button to start the search.

The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number) Set to OK by pressing the ENTER button.

↓Channel mode

-P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

-C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

-S (Cable channel mode): You can select a channel by entering the assigned number for each cable

channel in this mode.

English - 15

Viewing the EPG (Electronic Programme Guide) Information

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3 Press the ▲ or ▼ button to select Full Guide, Mini Guide or Default Guide then press the ENTER button.

Full Guide

For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.

↓One hours of programme information is displayed which may be scrolled forwards or backwards in time.

Mini Guide

The information of each program is displayed by each line on the current channel Mini Guide screen from the current

program onwards according to the program starting time order.

▲/▼/◄/►, (ENTER)

RED

GREEN

YELLOW

BLUE

INFO

Select a programme by pressing the ▲/▼/◄/► button.

If the next progrmme is selected, it is scheduled with the clock icon displayed. If the ENTER button is

pressed again, press the ▲/▼/◄/► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone.

For details about scheduling programmes, refer to the section.

Toggle between the Mini Guide or

Full Guide.

Full Guide: Scroll backwards quickly (24 hours).

Mini Guide: Display next page quickly.

Full Guide: Scroll forwards quickly (24 hours).

Mini Guide: Display previous page quickly.

Exit the guide.

INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “…” will be appeared if the summary is long.

Default Guide: Mini Guide/Full Guide

Press the ▲ or ▼ button to select Mini Guide or Full Guide. Press the ENTER button. The selected guide menu is displayed.

↓You can also display the guide menu simply by pressing the GUIDE button.

Auto Store

Manual Store

	Channel	Full Guide
		Mini Guide
		Default Guide				: Mini Guide
		Channel List
		Channel Mode				:Added Channels
		Child Lock				: On
		Fine Tune
		Signal Information
	Full Guide
				DTV 805 BBCi			18:08 Fri 5Aug
				BBCi
			18:00~0:00
				BBCi-featuring news, sport, weather and TV..
	Today		12:00 - 13:00				13:00 - 14:00
	▲801 BBC NEWS 24				BBC Ne..		BBC News
	802 BBC ONE				BBC Ne..		Departure Lounge
	803 BBC THREE				This is BBC THREE		The 7 O’..
	804 BBC THREE				This Weakest L..		Tsunami..
	805 BBCi				BBCi
	▼806				Canal 7		No Information
	Watch	INFO	information		Mini Guide		+24 Hours	Exit
		Manual Store
	Channel	Full Guide
		Mini Guide
		Default Guide				: Mini Guide
		Channel List
		Channel Mode				:Added Channels
		Child Lock				: On
		Fine Tune
		Signal Information
		LNA				:On
	Mini Guide				DTV 801 BBC NEWS 24
	18:00				BBC News
	18:30				Sportsday
	19:00				BBC News
	Watch	INFO	information		Full Guide		Next Page	Exit
			Full Guide
	Channel		Mini Guide
			Default Guide:			Full Guide
						Mini Guide
			Channel List
			Channel Mode			:Added Channels
			Child Lock			: On
			Fine Tune
			Signal Information
			LNA			:On

English - 16

Viewing All Channels

Show all currently available channels. To use the Channel List function, first run Auto Program.

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2Press the ◄ button to select Added Channels.

3Press the ▲ or ▼ button to select All Channels, then press the ENTER button. Shows all currently available channels.

4Press the ▲ or ▼ button to select a channel to view, then press the ENTER button.

Press the CH LIST button on the remote control to bring up the channel lists.

Using the Color buttons on the Remote with the Channel List

• Red (Channel Type): Toggle between your “TV”, “Radio”, “Data/Other” and “All”.

•Green (Zoom): Enlarges or shrinks a channel number.

•Yellow (Select): Selects multiple channel lists.

• (Option): Displays the “Delete”(or “Add”), “Add to Favourite”(or “Delete from Favourite”), “Lock”, “Timer Viewing”, “Edit Channel Name”, “Sort”, “Edit Channel Number”, “Select All”, “Deselect All” or “Auto Store” menu. (The Options menus may differ depending on the situation.)

	Mini Guide
Channel	Default Guide	:Mini Guide
	Channel List
	Channel Mode	:Added Channels
	Child Lock	: On
	Fine Tune
	Signal Information
	LNA	: Off

	Added	824	UKTV Gold
		825	UKTV style

Channels

1

C --

2

C --

3

C --

4

C --

5

C --

6

C --

7

C --

8

C --

All

Channel Type

Zoom

Select

Option

824

UKTV Gold

All

825

UKTV style

Channels

1

C --

2

C --

3

C --

4

C --

5

C --

6

C --

7

C --

All

8

C --

Channel Type

Zoom

Select

Option

↓A gray-colored channel indicates the channel has been deleted. The Add menu only appears for deleted channels.

↓A channel marked with ♥ mark means the channel has been set as a Favourite. The Delete from Favourite menu only appears for channels with the ♥ mark.

English - 17

Erasing and Adding Channels

You can delete or add a channel to display the channels you want.

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2Press the ◄ button to select Added Channels.

3Press the ▲ or ▼ button to select All Channels.

Shows all currently available channels. Press the ENTER button.

4Press the ▲ or ▼ button to select a channel to delete, then press the TOOLS button.

5Press the ENTER button to select Delete.

All deleted channels will be shown on All Channels menu.

6Press the EXIT button to exit.

↓You can also add a channel to the All Channels menu in the same manner.

↓A channel must be deleted before it can be added back to the Added Channels list.

↓To Add (Restore) a channel back to the Added Channel List, follow steps 1-3 above, press the ▲ or ▼ button to select a channel to add, the press the TOOLS button. Press the ENTER button to select Add.

↓Press the CH LIST button on the remote control to bring up the channel lists.

	Mini Guide
Channel	Default Guide	: Mini Guide
	Channel List
	Channel Mode	:Added Channels
	Child Lock	:On
	Fine Tune
	Signal Information
	LNA	: Off

	Added	824	UKTV Gold
		825	UKTV style

Channels			1			C --
			2			C --
			3			C --
			4			C --
			5			C --
			6			C --
			7			C --
			8			C --
All		Channel Type						Zoom	Select	Option
	824					UKTV Gold
All	825					UKTV style
Channels			1			C --
			2			C --
			3			C --
			4			C --
			5			C --
			6			C --
			7			C --
All			8			C --
		Channel Type						Zoom	Select	Option
	824					UKTV Gold
Added	825					UKTV style
			1			C --			Delete
Channels
									Timer Viewing
			2			C --			Add to Favourite
			3			C --			Edit Channel Name
			4			C --
			5			C --			Sort
									SelectAll
			6			C --				▼
			7			C --
All			8			C --
		Channel Type						Zoom	Select	Option

English - 18

Setting Your Favourite Channels

You can set channels you watch frequently as Favourite.

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2Press the ◄ button to select Added Channels.

3Press the ▲ or ▼ button to select All Channels, then press the ENTER button.

↓Shows all currently available channels.

4Press the ▲ or ▼ button to select a channel as a favourite channel.

↓Adding multiple channels to Favourite.

Press the ▲ or ▼ button to select the desired channel in the channel list. Then press the yellow button. Repeat the above operation to select multiple channels. The mark appears to the left of the selected channels.

5Press the TOOLS button.

6Press the ▲ or ▼ button to select Add to Favourite, then press the ENTER button.

The “♥” symbol will be displayed and the channel will be set as a favourite.

			Mini Guide
Channel			Default Guide						: Mini Guide
			Channel List
			Channel Mode						:Added Channels
			Child Lock						: On
			Fine Tune
			Signal Information
			LNA						: Off
	824						UKTV Gold
All	825						UKTV style
Channels			1				C --		Add to Favourite
									Delete
			2				C --		Timer Viewing
			3				C --
									Edit Channel Name
			4				C --		Sort
			5				C --		SelectAll	▼
			6				C --
			7				C --
			8				C --
All		Channel Type Zoom							Select	Option

7 To cancel your favourite channel selection, press the TOOLS button when a favourite channel is selected. Press the ▲ or ▼ button to select Delete from Favourite, then press the ENTER button. The channel is deleted from

Favourites and the “♥” mark disappears. Press the EXIT button to exit.

↓You can also Add or Delete a channel from Favourite in the Added Channels menu in the same manner.

↓All favourite channels will be shown on Favourite menu.

↓Press the CH LIST button on the remote control to bring up the channel lists.

English - 19

Reserving a Program (Time Viewing)

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel.

To reserve a program, set the current time fi rst. See pages 35. Reserved chanels can only be set if they are in the Channel List (See page 17).

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2Press the ▲ or ▼ button to select a channel, then press the TOOLS button.

3Press the ▲ or ▼ button to select Timer Viewing, then press the ENTER button.

The Reserve a Program (Timer Viewing) screen appears.

4Press the ▲/▼/◄/► buttons to reserve a program and then press the ENTER button.

Reserving a program has been completed. Press the EXIT button to exit.

↓You can also reserve a program in the All Channels or Favourites menus using the same procedures.

↓For information on how to confirm a viewing reservation, refer to page 21. Only memorized channels can be reserved.

↓You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.

Press the CH LIST button on the remote control to bring up the channel lists.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve a program according to the procedures described above.

: A program currently being broadcast. : A reserved program.

	Mini Guide
Channel	Default Guide	:Mini Guide
	Channel List
	Channel Mode	:Added Channels
	Child Lock	: On
	Fine Tune
	Signal Information
	LNA	: Off

	824		UKTV Gold
Added	825		UKTV style
		1	C --	Delete
Channels
	2		C --	Timer Viewing
				Delete from Favourite
		3	C --	Edit Channel Name
		4	C --	Sort
		5	C --	SelectAll
					▼
		6	C --
		7	C --
		8	C --
Air	Channel Type Zoom			Select	Option
			Timer Viewing
	Antenna		Channel		Repeat
		DTV	1		Once
		Date			Start Time
	01-01-2008				10:09

Move Adjust Enter Return

	824		UKTV Gold
Added	825		UKTV style	1/22/2008
		1	C --	12:47	2.0
Channels		2	C --	3:54	HD 1 99
		3	C --	6:44	HD 1 100
		4	C --	7:49	HD
		5	C --	8:59	+
		6	C --	10:08
		7	C --	10:37
		8	C --
Air	Zoom		Option	Watch

Continued...

English - 20

Confirming a Viewing Reservation

You can view, modify or delete a reservation.

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2Press the ◄ button to select Added Channels.

3Press the ▲ or ▼ button to select Programmed, then press the ENTER button.

You can view the program reservations.

Modifying a viewing reservation

4To select a reservation item to be modifi ed, press the ▲ or

▼ button and then press the TOOLS button.

5Press the ENTER button to select Change Info.

6Press the ▲/▼/◄/► buttons to change a reservation setting and then press the ENTER button.

The reservation modifi cation is applied.

Canceling a reservation

4To select a reservation item to be canceled, press the ▲ or

▼ button, and then press the TOOLS button.

5Press the ▲ or ▼ button to select Cancel Schedules,

then press the ENTER button.

6Press the ◄ or ► button to select OK, then press the ENTER button.

The viewing reservation has been canceled. Press the EXIT button to exit.

Programmed Menu

Channel

Channels Added

Air

Programmed

Air

Programmed

Air

Mini Guide
Default Guide	:Mini Guide
Channel List
Channel Mode	:Added Channels
Child Lock	: On
Fine Tune
Signal Information
LNA	: Off

824UKTV Gold

825UKTV style

		1	C --
		2	C --
		3	C --
		4	C --
		5	C --
		6	C --
		7	C --
		8	C --
	Channel Type			Zoom		Select	Option
2008/2/3
3:15			1		Air		No Program Name
4:15			2		Air		No Program Name
2008/2/4
2:14			3		Air		No Program Name
2008/2/5
2:15			4		Air		No Program Name
	Antenna		Zoom			Select	Option	Information
2008/2/3
3:15				1		Air	Change Info
4:15				2		Air	Cancel Schedules
							Information
2008/2/4
							SelectAll
2:14				3		Air	No Program Name
2008/2/5
2:15				4		Air	No Program Name
	Antenna		Zoom		Select		Option	Information

•Change Info: Select to change a viewing reservation.

•Cancel Schedules: Select to cancel a viewing reservation.

•Information: Select to view a viewing reservation.

•Select All / Deselect All: You can select(or Deselect) all channel in the channel list.

Press the CH LIST button on the remote control to bring up the channel lists.

Continued...

English - 21

Assigning Names to Channels

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

Editing the Channel Name-Analogue

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

4Press the ▲ or ▼ button to select the channel to be assigned to a new name, then press the TOOLS button.

5Press the ▲ or ▼ button to select Edit Channel Name,

then press the ENTER button.

6Press the ▲/▼/◄/► button to select a letter, a number, or a symbol, then press the ENTER button.

•Number buttons: You can enter numbers.

•Red button: You can switch between English and Characters.

•Green button: You can delete an already entered character.

•Yellow button: You can enter a blank space.

•Blue button: Press this button to finish renaming a channel.

7Repeat steps 5 to 6 for each channel to be assigned to a new name.

8Press the EXIT button to exit.

Editing the Channel Number-Digital

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2Select the channel number that you wish to edit by pressing the ▲ or ▼ button repeatedly, then press the TOOLS button.

3Press the ▲ or ▼ button to select Edit Channel Number, then press the ENTER button.

4Then you can edit the Channel Number pressing the ▲ or ▼ button repeatedly. You can also edit the channel number by pressing the number buttons on the remote control.

			Mini Guide
Channel			Default Guide		: Mini Guide
			Channel List
			Channel Mode		:Added Channels
			Child Lock		: On
			Fine Tune
			Signal Information
			LNA		: Off
	824			Television
Added	825			UKTV style
			1	C --	Delete
Channels
					Timer Viewing
			2	C --	Delete form Favourite
			3	C --	Edit Channel Name
			4	C --	Sort
			5	C --	SelectAll	▼
			6	C --
			7	C --
			8	C --
All		Channel Type Zoom			Select	Option ►Next Program

Edit Channel Name

6_

		A									Number
											Character
											Delete
		V									Blank
											Done
							Move		Enter		Return
		824				Television
Added		825				UKTV style
		826				UKTB style	Delete
Channels
				2		C --	Add to Favourite
				3		C --	Timer Viewing
				4		C --	Edit Channel Number
				5		C --	SelectAll
				6		C --	Auto Store
				7		C --
				8		C --
	All		Channel Type Zoom				Select			Option
									TOOLS
					Edit Channel Number
	Channel							Name
		803					BBC Radio 1
						Move			Enter		Return

English - 22

Sorting the Stored Channels - Analogue

This operation allows you to change the programme numbers of the stored channels.

This operation may be necessary after using the auto store.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

4Press the TOOLS button.

5Press the ▲ or ▼ button to select Sort, then press the ENTER button.

6Select the channel that you wish to move by pressing the ▲ or ▼ button, then press the ENTER button.

7Select the number of the programme to which the channel is to be moved by pressing the ▲ or ▼ button.

Press the ENTER button. The channel is moved to its new position and all other channels are shifted accordingly.

8Repeat steps 4 to 7 until you have moved all the channels to the required programme numbers.

9Press the EXIT button to exit.

			Mini Guide
Channel			Default Guide		: Mini Guide
			Channel List
			Channel Mode		:Added Channels
			Child Lock		: On
			Fine Tune
			Signal Information
			LNA		: Off
	824			Television
Added	825			UKTV style
			1	C --	Delete
Channels
					Timer Viewing
			2	C --	Delete form Favourite
			3	C --	Edit Channel Name
			4	C --	Sort
			5	C --	SelectAll	▼
			6	C --
			7	C --
			8	C --
All		Channel Type Zoom			Select	Option
				Sort
0			C--
1			C04
2			C05
3			C06
4			C08
5			C09			▼
				Move	Enter	Return

English - 23

Option

Channel Type Zoom Select

824 Television

Option

SelectAll

Auto Store

5 C --

6 C --

7 C --

8 C --

Add to Favourite Timer Viewing Edit Channel Name Sort

1 C --

2 C --

3 ωC --

4 C --

▲

824 Television

825 UKTV style

Selecting and Deselecting All Channels

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

2Press the ▲ or ▼ button to select the Channel to be assigned a new name, then press the TOOLS button.

3Press the ▲ or ▼ button to select Select All or Deselect All, then press the ENTER button.

↓ You can select(or Deselect) all channel in the channel list. ↓ The mark appears to the left of the selected channels.

Channels Added

All

Storing Channels in Memory (Auto Store)

1Press the MENU button.

Press the ▲ or ▼ button to select Channel, then press the	Added	825			UKTV style
ENTER button.	Channels			1	C --	▲
						Add to Favourite
Press the ▲ or ▼ button to select Channel List, then press				2	C --	Timer Viewing
				3	C --
the ENTER button.				4	C --	Edit Channel Name
				5	C --	Sort
2 Press the ▲ or ▼ button to select the channel to be				6	C --	SelectAll
assigned a new name, then press the TOOLS button.				7	C --	Auto Store
				8	C --
3 Press the ▲ or ▼ button to select Auto Store, then press	All		Channel Type Zoom			Select

the ENTER button.

↓ For further details on setting up options, refer to page 14.

↓ When there is a locked channel by Channel Lock setting, PIN input screen appears. (refer to page 25)

Setting the Channel Mode

You can display either the added channels list or the favourite channels list when the CH LIST button on the remote control is

pressed.	Channel
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel Mode, then
press the ENTER button.

2Press the ▲ or ▼ button to select Added Channels or

Favourite Channels, then press the ENTER button.

3Press the EXIT button to exit.

Channel

Default Guide	: Mini Guide
Channel List
Channel Mode	:Added Channels
Child Lock	: On
Fine Tune
Signal Information
LNA	: Off

	Default Guide	: Mini Guide
	Channel List
	Channel Mode	Added Channels
		Favourite Channels
	Child Lock	: On
	Fine Tune
	Signal Information
	LNA	: Off

English - 24

Signal Information LNA

Channel Mode :Added Channels Child Lock : On

Locking Channels

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.

Locking channels

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3Press the ▲ or ▼ button to select Child Lock, then press the ENTER button.

Enter your 4 digit PIN number.

↓The default PIN number of a new TV set is “0-0-0-0”.

↓If you want to change PIN number, refer to page 36.

4Press the ▲ or ▼ button to select On, then press the ENTER button.

5Press the ▲ or ▼ button to select Channel List, then press the ENTER button.

6Press the ▲ or ▼ button to select a channel to be locked, then press the TOOLS button.

↓The symbol will be displayed and the channel will be locked.

Unlocking channels

7Press the ▲ or ▼ button to select Unlock, then press the ENTER button.

Enter your 4 digit PIN number.

↓The channel is unlocked and the (lock icon) mark also disappears.

↓The default PIN number of a new TV set is “0-0-0-0”.

		Channel List
	Channel	Channel Mode	:Added Channels
		Child Lock	: On	►
		Fine Tune
		Signal Information
		LNA	: On

Child Lock

Enter PIN
	*			*		*	*
				0~9		Enter PIN	Return
	824				UKTV Gold
All	825				UKTV style
Channels			1		C --	Delete
			2		C --	Add to Favourite
			3		C --	Lock
			4		C --	Timer Viewing
			5		C --	Edit Channel Name
			6		C --	Sort
			7		C --		▼
			8		C --
All		Channel Type Zoom				Select	Option

Fine Tuning Analogue Channels

Use fine tuning to manually adjust a particular channel for optimal reception.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2Press the ▲ or ▼ button to select Fine Tune, then press the ENTER button.

3Press the ◄ or ► button to adjust the fine tuning.

To store the fine tuning setting in the TV’s memory, press the ENTER button.

↓If you do not store the fine-tuned channel in memory, adjustments are not saved.

4To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTER button.

Press the EXIT button to exit.

↓Only Analogue TV channels can be fine tuned.

↓“ * ” will appear next to the number of fine-tuned channels.

Channel	Fine Tune	►

: Off

Fine Tune

ATV 6 *

Fine Tuned

+5

Reset

Move Enter Return

English - 25

Viewing Signal Information

You can get information about the signal status.

1Press the MENU button to display the menu. Press the ▲ or

▼button to select Channel, then press the ENTER button. 2 Press the ▲ or ▼ button to select Signal Information ,

then press the ENTER button. 3 Press the EXIT button to exit.

↓If the signal status is poor, the No Signal. message is displayed.

↓While viewing a Digital channel, this function can be selected.

Channel

Child Lock	: On
Fine Tune

Signal Information		►
LNA	: Off

Signal Information

Service ID	: 0403
Multiplex	: (TSID 0004,ONID 20fa)
Network	: (ID 20fa)
Bit error level			0
Signal Strength				82
	OK
		Enter	Return

LNA (Low Noise Amplifier)

This function is very useful in the situation that the TV is used in weak signal.

LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming signal.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3Press the ▲ or ▼ button to select LNA, then press the ENTER button.

4Select Off or On by pressing the ▲ or ▼ button, then press the ENTER button.

5Press the EXIT button to exit.

↓While viewing an Analogue channel, this function can be selected.

Channel

Fine Tune

Signal Information

LNA Off

On

English - 26

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1 Press the MENU button to display the menu.

2Press the ENTER button to select Picture.

3Press the ENTER button again to select Mode.

4Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button.

Available modes: Dynamic, Standard, Movie

↓The settings values may vary depending on the input source.

5Press the EXIT button to exit.

↓ Choose Dynamic for viewing the TV during the day or when there is bright light in the room.

Choose Standard for general TV watching mode.Choose Movie when viewing the movie.

Picture

Picture

Mode	:Standard ►
Cell Light	:7
Contrast	: 95
Brightness	: 45
Sharpness	: 50
Colour	: 50
Tint (G/R)	: G50/R50
Detailed Settings

Mode	: Dynamic
Cell Light	:7 Standard
Contrast	: Movie
Brightness	: 45
Sharpness	: 50
Colour	: 50
Tint (G/R)	: G50/R50
Detailed Settings

Easy Setting

1Press the TOOLS button on the remote control.

2Press the ▲ or ▼ button to select Picture Mode.

3Press the ◄ or ► button to select the required option.

Customizing the Picture Settings

Tools

		Device List
	Picture Mode		◄ Standard ►
	Sound Mode		:	Standard
	Sleep Timer		:	Off
	SRS TS XT		:	Off
	Energy Saving		:	Off
	Dual I II		:	Mono
			Move	Adjust	Exit

	Your television has several setting options that allow you
	to control the picture quality.		Picture	Mode	:Standard
	1	Press the MENU button to display the menu.		Cell Light	:7	►
	2	Press the ENTER button to select Picture.
				Contrast	: 95
	3	Press the ENTER button again to select Mode.
				Brightness	: 45
	4	Select the required mode by pressing the ▲ or ▼ button,		Sharpness	: 50
		then press the ENTER button.		Colour	: 50
		Available modes: Dynamic, Standard, Movie
				Tint (G/R)	: G50/R50
	5	Select the required option by pressing the ▲ or ▼ button,
				Detailed Settings
		then press the ENTER button.		Picture Options
	6	When you are satisfied with your setting, press the ENTER
		button.
	7	Press the EXIT button to exit.

Cell Light – Contrast – Brightness – Sharpness – Colour – Tint(G/R)

↓In TV, Ext., AV, S-Video modes of the PAL system, you cannot use the Tint Function. ↓In PC mode, you can only make changes to Contrast and Brightness.

Press the ◄ or ► button until you reach the optimal setting.

English - 27

Configuring Detailed Settings on the Picture

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2Press the ENTER button to select Picture.

3Press the ▲ or ▼ button to select Detailed Settings, then press the ENTER button.

4Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

Available options: Black Adjust, Dynamic Contrast, Gamma, Colour Space, White Balance, Flesh Tone, Edge Enhancement, xvYCC

5When you are satisfied with your setting, press the ENTER button.

6Press the EXIT button to exit.

↓Detailed Settings is available in Standard or Movie mode.

↓In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance from among the Detailed Settings items.

Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

	Colour	: 50
Picture	Tint (G/R)	: G50/R50
	Detailed Settings
	Picture Options
	Picture Reset

Detailed Settings

BlackAdjust	: Off
Dynamic Contrast	: Low
Gamma	: 0
Colour Space	: Native
White Balance
Flesh Tone	: 0
Edge Enhancement	: On

►

►

Dynamic Contrast: Off/Low/Medium/High	Move	Enter	Return
You can adjust the screen contrast so that the optimal
contrast is provided.

Gamma: -3 ~ +3

You can adjust the middle brightness of pictures.

Press the ◄ or ► button until you reach the optimal setting.

Colour Space : Auto/Native/Custom

Colour space is a colour matrix composed of red, green and blue colours.

Select your favourite colour space to experience the most natural colour.

− Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program sources.

− Native: Native Colour Space offers deep and rich colour tone.

− Custom: Adjusts the colour range to suit your preference. (see “Customizing the Colour Space”)

Customizing the Colour Space

Colour: Red/Green/Blue/Yellow/Cyan/Magenta

Adjusts the Colour range to suit your preference.

Colour is available when Colour Space is set to Custom.

Press the ▲ or ▼ button to select Red, Green, Blue, Yellow, Cyan or Magenta. Press the ENTER button.

−Red/Green/Blue: In Colour, you can adjust the RGB values for the selected colour.

Press the ▲ or ▼ button to select Red, Green or Blue to change it. Press the ENTER button. Press the ◄ or ► button to decrease or increase the value of a particular item.

Press the ENTER button.

−Reset: Resets the colour space to the default values.

White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the colour temperature for more natural picture colours.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Continued...

English - 28

Flesh Tone:-15~+15

You can emphasize the pink tone in the picture.

Press the ◄ or ► button until you reach the optimal setting.

↓Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement: Off/On

You can emphasize object boundaries.

xvYCC: Off/On

Setting the xvYCC mode to On increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.

↓The xvYCC function works only in Component or HDMI mode

↓If xvYCC function is active, PIP cannot be selected.

Picture Options

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2Press the ENTER button to select Picture.

3Press the ▲ or ▼ button to select Picture Options, then press the ENTER button.

4Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

5 When you are satisfied with your setting, press the ENTER button.

6Press the EXIT button to exit.

↓In PC mode, you can only make changes to the Colour Tone, Size and Screen Burn Protection from among the items in Picture Options.

Picture

Tint (G/R)	: G50/R50
Detailed Settings

Picture Options	►
Picture Reset

Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

↓When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.

Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your viewing requirements.

−Auto Wide: Expanding and pulling up the picture from

4:3 to 16:9 ratio.

↓Auto Wide function is available only in TV, Ext.1,

Ext.2, AV and S-Video mode.

− 16:9: Sets the picture to 16:9 wide mode.

Picture Options
Colour Tone	: Cool2
Size	Cool1
Screen Mode	: Normal
Digital NR	:
DNle	Warm1
	:
HDMI Black Level	Warm2
	:
Movie Plus	:Off
Move	Enter	Return

−Wide Zoom: Magnify the size of the picture more than 4:3.

Move the screen up/down using the ▲ or ▼ button after selecting the Position by pressing the ► or ENTER button.

−Zoom: Magnify the size of the picture vertically on screen.

−4:3: Sets the picture to 4:3 normal mode.

−Just Scan: Use this function to see the full image without any cutoff when HDMI(720p/1080i/1080p), Component(1080i/1080p) signals are input.

After selecting Just Scan in HDMI (1080i/1080p) or Component (1080i/1080p) mode: Press the ◄ or ► button to select Position, then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initialize the setting.

↓With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off or a specific colour appears on the screen.

↓For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p) connection of 50 and 60Hz, only the input source is supported.

↓You can change the picture size simply by pressing the P.SIZE button on the remote control. ↓Depending on the input source, the picture size options may vary.

↓The items available may differ depending on the selected mode.

↓When Double (, ) mode has been set in PIP, the Picture Size cannot be set. ↓In PC Mode, only "16:9" and "4:3" mode can be adjusted.

↓If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

Continued...

English - 29

Positioning and Sizing the screen using Zoom

−Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the ▲ or ▼ button as well as the screen size.

−Move the screen up/down using the ▲ or ▼ button after selecting the Position by pressing the ◄ or ► button.

−Resize the screen vertically using the ▲ or ▼ button after selecting the Size by pressing the ◄ or ► button.

Screen Mode: 16:9/Wide Zoom/Zoom/4:3

When setting the picture size to Auto Wide in a 16:9 wide			Picture Options
TV, you can determine the picture size you want to see the		Colour Tone		: Normal
4:3 WSS (Wide Screen Service) image or nothing. Each
		Size
individual European country requires different picture size				16:9
so this function is intended for users to select it.		Screen Mode		: Wide Zoom
−	16:9: Sets the picture to 16:9 wide mode.	Digital NR		:
−	Wide Zoom: Magnify the size of the picture more than	DNle		Zoom
				:
	4:3.	HDMI Black Level		4:3
−	Zoom: Magnify the size of the picture vertically on			:
		Movie Plus		:Low
	screen.
−	4:3: Sets the picture to 4:3 normal mode.		Move	Enter	Return
↓This function is available in Auto Wide mode.
↓This function is not available in PC,Component or HDMI mode.

Digital NR: Off/Low/Medium/High/Auto

If the signal received by the television is weak, you can activate this feature to reduce any static and

ghosting that may appear on the screen.

↓When the signal is weak, select one of the other options until the best picture is displayed.

DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.

↓DNIeTM (Digital Natural Image engine)

This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.

↓This function is available only in Dynamic mode.

HDMI Black Level: Normal/Low

Using this function, you can adjust the image quality when the screen burn (appearance of black level, low contrast, low colour, etc.) is encountered by the HDMI input for RGB limited range (16 to

235).

↓This function is active only when the external input connects to HDMI(RGB signals).

Movie Plus: Off/Low/Medium/High/Demo

You can view more natural skin and clear text even in fast moving scenes.

↓Use this function when watching movies.

↓This function is not available in Wide Zoom and Zoom modes. ↓This function is not available when PIP is set to On.

↓It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.

Blue Only Mode: Off/On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/ Cyan/Magenta/ Yellow Colour Bar Patterns,

without using an additional Blue Filter.

↓Blue Only Mode is available when the picture mode is set to Movie or Standard.

Continued...

English - 30