Raymarine C-SERIES Manual

C-Series Display

New Features

Document number: 81298-1

Date: January 2007

C-Series New Features

Trademarks and registered trademarks

Autohelm, HSB, Raymarine, RayTech Navigator, Sail Pilot, SeaTalk and Sportpilot are registered trademarks of Raymarine Limited. Apelco is a registered trademark of Raymarine Holdings Limited (registered in all major marketing territories).

AST, Autoadapt, Auto GST, Autoseastate, Autotrim, Bidata, Marine Intelligence, Maxiview, On Board, Raychart, Raynav, Raypilot, Raystar, ST40, ST60, Seaclutter, Smart Route, Tridata and Waypoint Navigation are trademarks of Raymarine Limited.

Navionics is a registered trademark of Navionics Company, Italy.

All other product names are trademarks or registered trademarks of their respective owners. Software in this product is based in part on the work of the Independent JPEG Group. Contents of this handbook ©Raymarine UK 2006.

		1
Contents
Chapter 1:	New Features of the C-Series Display Unit ..........................................	1
1.1	Navionics support ..........................................................................................	1
1.2	Chart application ............................................................................................	1
1.3	Graphical data ................................................................................................	1
1.4	Autopilot control ............................................................................................	1
1.5	Weather (US only) .........................................................................................	2
1.6	Sirius Audio (US only) ..................................................................................	2
Chapter 2:	Chart Application Updates ....................................................................	3
2.1	Animated tides and currents ..........................................................................	3
	To view tide and current animations ..........................................................	3
	Controlling the animation ..........................................................................	4
2.2	Range rings ....................................................................................................	5
	To turn range rings on or off ......................................................................	5
2.3	Navionics combined data cards .....................................................................	6
	To display bathymetric information ..........................................................	6
Chapter 3:	Graphical Data .........................................................................................	7
3.1	Compass bar ..................................................................................................	7
	Turning the compass bar on and off ...........................................................	7
	Compass bar setup .....................................................................................	8
3.2	Graphical engine data ....................................................................................	8
	To set up an engine data page .....................................................................	8
	Engine tilt and trim ....................................................................................	8
	Genset data ................................................................................................	8
	To change the number of gensets ...............................................................	9
Chapter 4:	Autopilot Control ..................................................................................	11
	Emergency disengage .............................................................................	11
4.1	Enabling and engaging the autopilot ............................................................	11
	To enable autopilot control ......................................................................	11
	To engage the autopilot in normal operation ...........................................	11
	To engage the autopilot from the Setup Menu ........................................	12
	To disengage the autopilot in normal operation ......................................	12
	Emergency disengage ............................................................................	12
	Autopilot Status Indicator ......................................................................	13

		C-Series New Features
4.2	The autopilot control screen ........................................................................	13
4.3	Waypoint arrival ..........................................................................................	14
	…when there are more waypoints in your route .....................................	14
	…when you reach the last waypoint in your route .................................	14
Chapter 5:	Weather (US only) .................................................................................	17
5.1	Overview .....................................................................................................	17
5.2	Disclaimer ....................................................................................................	17
5.3	Setting up the weather application ...............................................................	17
	Pre-requisites for using the weather application ....................................	18
	Adding a weather application .................................................................	18
	Specifying the weather elements displayed ...........................................	18
5.4	The weather display .....................................................................................	18
5.5	Moving around the weather map .................................................................	19
5.6	Placing waypoints ........................................................................................	19
5.7	Weather graphics .........................................................................................	20
	Precipitation (NOWRad) .......................................................................	21
	Storm Cast ..............................................................................................	21
	Sea surface temperature (SST) ...............................................................	22
	Canadian radar ........................................................................................	22
	Tracking storms ......................................................................................	22
	Lightning ................................................................................................	23
	Surface observation stations ...................................................................	23
	City forecasts ..........................................................................................	24
	Wind .......................................................................................................	25
	Waves .....................................................................................................	25
	Surface pressure .....................................................................................	26
	Viewing data at a particular location ......................................................	26
5.8	Animated weather graphics .........................................................................	26
	Setting up animation ...............................................................................	26
	Running the animation ...........................................................................	27
5.9	Viewing weather reports ..............................................................................	27
	Tropical statements ................................................................................	27
	Marine warnings .....................................................................................	28
	Marine zone forecasts .............................................................................	28
5.10 Watchbox warnings .....................................................................................		29
	Watchbox warning alerts ........................................................................	29

		3
	Displaying marine watchboxes ..............................................................	30
	Displaying watchbox data ......................................................................	30
5.11 Weather application setup ............................................................................		31
	Selecting the Weather Setup Menu .........................................................	31
	Weather Setup options ............................................................................	31
	Showing/hiding marine watchboxes and zone boundaries ....................	31
5.12 Troubleshooting ...........................................................................................		32
Chapter 6:	Sirius Audio (US only) ...........................................................................	33
6.1	To start using Sirius Radio ...........................................................................	33
6.2	Tuning to a channel ......................................................................................	34
6.3	Browsing channels .......................................................................................	34
	Filtering categories from the browse ......................................................	35
	To filter categories ..................................................................................	35
6.4	Scanning channels .......................................................................................	35
	To scan channels .....................................................................................	35
6.5	Hiding or showing channels and categories .................................................	35
	To hide or show a channel or category ....................................................	35
6.6	Presets ..........................................................................................................	36
	To assign a channel to a preset ................................................................	36
	To delete a channel from a preset ............................................................	36
	To move a channel to a new preset .........................................................	36
6.7	Parental locking ...........................................................................................	36
	To enable blocking .................................................................................	37
	To set up a password ...............................................................................	37
	To change an existing password .............................................................	37
	To block a channel ..................................................................................	37
	To enter a password ................................................................................	38
6.8	Favourite song alerts ....................................................................................	38
	To enable favourite alerts .......................................................................	38
	To set up a song or artist alert ..................................................................	38

C-Series New Features

Important information	i

Important Information

Intended use

The C-Series display unit can be used in GPS-based or marine radar-based navigation systems on non-IMO/SOLAS class leisure vessels or small workboats.

This handbook tells you how to operate and maintain the C-Series display effectively.

For information on system integration and how to install the unit, refer to the C-Series Installation Guide supplied with the display.

Safety notices

WARNING: Navigation Aid

This device is intended to be used as an aid to navigation. Its accuracy can be affected by many factors, including equipment failure or defects, environmental conditions and incorrect handling or use. It is the user’s responsibility to exercise common prudence and navigational judgement. This device should not be relied upon as a substitute for such prudence and judgement.

WARNING:Product installation

This equipment must be installed in accordance with the instructions in the C-Series System Installation Guide. Failure to do so could result in poor product performance, personal injury and/or damage to the vessel.

WARNING:High voltage

The display unit and scanner unit contain high voltages. Adjustments require specialized service procedures and tools only available to qualified service technicians - there are no user serviceable parts or adjustments. The operator should never remove the display unit cover or attempt to service the equipment.

WARNING:Electromagnetic energy

The radar scanner transmits electromagnetic energy. Ensure that the scanner has been installed according to the recommendations given in the relevant scanner handbook. Avoid looking directly at the antenna.

ii	C-Series Display New Features

WARNING:Fishfinder sounder module

Removing the transducer cable from the rear of the fishfinder

sounder module whilst it is switched on can cause sparks. Only remove the transducer cable after power has been switched off. Ensure that the sounder module is mounted where it is well ventilated and in an area free from flammable vapors.

CAUTION: Water Ingress

To prevent the ingress of water and consequent damage to the display, ensure that the chart card door is firmly closed. This can be confirmed by an audible click.

CAUTION: CompactFlash Cards

•Removing the CompactFlash card whilst information is being written to or read from it may cause damage to the card and loss of all data. Use the proper procedure detailed on page 18 to remove the card.

•Do not save data (waypoints, routes etc.) to a Navionics card as the charts may be overwritten. When archiving use a different CompactFlash card.

•DO NOT use a metallic instrument such as a screwdriver or pliers to help you remove a card, as doing this can cause irreparable damage.

CAUTION: Global Positioning System Antenna

Do not connect or disconnect the GPS antenna from the display unit whilst power is switched on. Doing this may result in irreparable damage.

CAUTION: UV Light

To provide protection against the damaging effects of UV light, it is advisable to replace the sun cover provided when the display is not in use.

CAUTION: Cleaning the display

Take care when cleaning the display, to avoid damaging it:

(1)Do NOT wipe the display screen with a dry cloth, as this could scratch the screen coating.

(2)Do NOT use acid, ammonia based or abrasive products.

Disclaimer

Electronic charts are an aid to navigation designed to facilitate the use of authorized government charts, not to replace them. Only official government charts and notices to mariners contain the current information needed for safe navigation. The Captain is responsible for their prudent use. The C-Series and its charts do not therefore exclude the user from carrying the required official charts and documents.

Raymarine does not warrant that this product is error-free or that it is compatible with products manufactured by any person or entity other than Raymarine.

Important information	iii

This product uses digital chart data, bathymetric data, three-dimensional and photographic imagery, and electronic information from the Global Positioning System (GPS) which may contain errors. Raymarine does not warrant the accuracy of such information and you are advised that errors in such information may cause the product to malfunction. Raymarine is not responsible for damages or injuries caused by your use or inability to use the product, by the interaction of the product with products manufactured by others, or by errors in chart data or information utilized by the product and supplied by third parties.

About this manual

This manual describes how to operate your C-Series display in conjunction with Navionics cartography. It assumes that all peripheral equipment to be operated with it is compatible and has been correctly installed.

This manual is intended for users of varying marine abilities, but assumes a general level of knowledge of display use, nautical terminology and practices.

Technical accuracy

To the best of our knowledge, the technical information contained within this handbook was correct at the time of printing. However, Raymarine cannot accept liability for any inaccuracies or omissions it may contain.

Raymarine’s policy of continuous product improvement may mean specifications change without notice. As a result, Raymarine cannot accept liability for any differences between the product and this handbook.

Raymarine does not support after-sales or technical support for Navionics chart cards. If you wish to file a report of an error or omission on a Navionics chart, please provide the information to the Navionics web site at the link below:

http://www.navionics.com/DiscrepancyReports.asp

Raymarine does not necessarily support all the features in particular Navionics cartography.

EMC conformance

All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. Their design and manufacture conforms to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to ensure that performance is not compromised.

iv	C-Series Display New Features

Multi-media chart cards

To use your C-Series Display as a navigation aid, you need charts with the appropriate level of detail for the geographic area you wish to navigate. The charts are available in electronic format on Navionics Chart cards.

To check the current availability of Navionics® chart card types and the latest feature sets, visit www.navionics.com or www.navionics.it.

To obtain Navionics cards, contact your local dealer or visit the Navionics web site.

Alternatively, from anywhere in North America call Navionics toll-free on 1-800-848- 5896. Outside of North America, contact your local dealer or Navionics SpA on:

Phone: [phone] or Fax: [phone])

When you archive data, use only SanDisk CF memory cards. Other brands of CF memory card may not work in your C-Series Display.

Disposal

Waste Electrical and Electronic Equipment (WEEE) Directive

The WEEE Directive requires the recycling of waste electrical and electronic equipment. Whilst the WEEE Directive does not apply to some of Raymarine’s

products, we support its requirements as part of our environmental policy and we ask you to be aware of how you should dispose of this product.

The crossed-out wheelie bin symbol found on a product signifies that it should not be disposed of in general waste or landfill.

Please contact your local dealer, national distributor or Raymarine Technical Services for information on product disposal.

Chapter 1: New Features of the C-Series Display Unit	1

Chapter 1: New Features of the C-Series

Display Unit

This document describes features which have been added to the C-Series display unit since the C-Series Display Reference Manual (document number 81221-2) was written. All the content of that manual is still valid, and the features it covers still operate as described.

You can now listen to Sirius Audio satellite radio broadcasts, view tide and current animations, and make use of improved weather information. There is also autopilot integration and improved graphical display of data, including a compass bar.

This document tells you how to use the new functions and features.

For installation information, refer to the C-Series Display Installation Manual (document number 87020-2).

1.1 Navionics support

In addition to Gold and Platinum, the C-Series now supports the following Navionics cartography:

•Silver

•Gold Plus

•HotMaps USA

•HotMaps Premium

•Fish ‘N Chip

For more information on Navionics charts, see www.navionics.com.

1.2 Chart application

A new Animate function shows tide and current data in animated sequences. You can control the way these sequences are played, including setting the date for the animation. The Chart application also now provides range rings.

1.3 Graphical data

You can now set the display unit to show a compass bar along the top of the screen, and configure it to display various engine data.

1.4 Autopilot control

If you have a Raymarine autopilot and pilot head installed, you can access some of its functions from the C-Series display.

2	C-Series Display New Features

Note: The display unit does not replace the pilot head: never use autopilot functions without a pilot head installed.

1.5 Weather (US only)

Note: The following weather features require the SR50 Sirius Receiver and separate subscription.

The weather application superimposes historical, live and forecasted weather graphics on a world map. It also provides textual forecasts and warnings. These graphics and their associated weather data enable you to determine the actual conditions in your vicinity or at a particular location. Weather forecasts and warnings, detailing current and predicted conditions, are regularly updated.

1.6 Sirius Audio (US only)

Note: The following audio features require the SR50 Sirius Receiver and separate subscription.

The C-Series can control a Sirius audio receiver, giving you access to satellite radio channels. You can also make use of features including preset channels, channel scan, favourite song alerts, and parental locking.

Chapter 2: Chart Application Updates	3

Chapter 2: Chart Application Updates

Updates to the Chart application allow you to view tide and current animations for a 24-hour period, set the display unit to overlay range rings on the chart view, and show bathymetric data included on Navionics combined data cards.

This chapter tells you how to make use of the new Chart application features.

WARNING:Electronic charts are an aid to navigation designed to facilitate the use of authorized government charts, not to replace them. Only official government charts and notices to mariners contain the current information needed for safe navigation. The captain of the vessel is responsible for their prudent use. The C-Series and its charts do not exclude the user from carrying the required official charts and documents.

2.1 Animated tides and currents

You can set the date for the animation and choose to see the whole animation from the beginning or start it at any point within the 24-hour period. You can also choose to view the animation continuously or to step through it in increments of time you set.

To view tide and current animations

In the Chart application:

1.Highlight a tide or current icon.

2.Press OK to open the Object Info dialog box and toolbar.

3.Press the ANIMATE… softkey.

The Tide/Current Animation screen opens with animation paused.

4	C-Series Display New Features

Direction and speed of current (green arrows)

Tide height

Press the ANIMATION PLAY/PAUSE softkey to start animation.

Animation time and date are displayed on the status bar; the animation starts from the current time.

Controlling the animation

When you open the Tide/Current Animation screen, the toolbar provides softkeys to stop and start the animation; step the animation forwards or backwards in time; set the size of the step, or select a date for the animation.

The animation plays in a loop: when it reaches the end of a 24-hour animation period, it starts again at the beginning.

To start or stop the animation

On the Tide/Current Animation screen:

• Press the ANIMATION PLAY/PAUSE softkey.

To view the animation in steps

On the Tide/Current animation screen:

• Press either the STEP BACK or STEP FWD softkeys.

Chapter 2: Chart Application Updates	5

To set the step interval

The Set Time Interval softkey gives you control over the Step Forward and Step Back functions.

1.If the animation is playing, press PAUSE.

2.Press the SET TIME INTERVAL softkey.

This displays a slider with the current time interval shown. Use the rotary controller to adjust it (within the range of 15 to 120 minutes).

3. Press OK or CANCEL to save the new interval.

Note: The animation must be paused for the Set Time Interval function to be available.

To set the animation date

1. Press the SET DATE softkey.

This displays the Edit Date screen and toolbar. Table 2-1: Animation Date Toolbar

TODAY’S DATE	Set the animation date to the current date.
PREV DATE	Set the animation date to 24-hours previous to current
	date.
NEXT DATE	Set the animation date to 24-hours ahead of current date.
EDIT DATE	Opens the Edit Date pop-up screen: use the trackpad or
	rotary controller to enter the date you want to see an ani-
	mation for.

2.Press OK to save the new date and return to the Tide/Current Animation screen, which will update to display the tide or current for the date you chose.

Note: Press CANCEL to ignore the date change and go back to the Tide/Current Animation screen, leaving the date setting unchanged.

2.2 Range rings

Range rings give you an incremental representation of distance from your vessel to help you judge distances at a glance. The rings are always centred on your vessel, and the scale varies to suit your current zoom setting. Each ring is labelled with the distance from your vessel.

To turn range rings on or off

In the Chart application:

1.Press the PRESENTATION softkey.

2.Press the CHART LAYERS softkey.

6	C-Series Display New Features

3.Select RANGE RINGS ON/OFF.

2.3Navionics combined data cards

Some Navionics data cards provide detailed bathymetric information in addition to standard chart information. You can choose between the standard chart view, or the view displaying bathymetric contours.

To display bathymetric information

In the Chart application:

1.Press the PRESENTATION softkey.

2.Press the CHART LAYERS softkey.

3.Press the CHART TYPE softkey to toggle between FISH and NAV options.

• The FISH option displays bathymetric information.

• The NAV option displays the standard chart view.

If you select FISH and no data is available for your current position, the databar displays (FISH) to indicate that you are in that mode but without data.

Chapter 3: Graphical Data	7

Chapter 3: Graphical Data

The C-Series now gives you the option to display some navigation and engine data graphically. You can configure the unit to display a compass bar, and to show additional engine and genset (engine-driven electricity generator) data.

3.1 Compass bar

The compass bar gives you a continuous readout centred on your current heading or course over ground (COG). Arrows at either end of the bar indicate current steer direction.

Active waypoint

Bearing marker

Steer direction

•In heading mode, the bearing marker is RED.

•In COG mode, the bearing marker is GREEN.

•When you use the compass bar with an active waypoint, the bearing marker is BLUE and the active waypoint symbol indicates the bearing to your waypoint.

Turning the compass bar on and off

You turn the compass bar on and off from the data toolbar.

• Press the DATA button.

Use the DATABAR softkey to turn the compass bar on or off.

Table 3-1:	DATABAR Softkey Options
ON	Displays the standard databar, at the top or side of the
	screen depending on your setup options.
COMPASS	Replaces the standard databar with the compass bar,
	displayed along the top of the screen.
OFF	Removes both the databar and the compass bar from your
	display.