Panasonic WV-SW155M, WV-SW152M, WV-SW155E, WV-SW155ME, WV-SW152E Installation
...
Installation Guide
Network Camera
Model No. WV-SW155/WV-SW155M
WV-SW152/WV-SW152M
WV-SW155E/WV-SW155ME
WV-SW152E/WV-SW152ME
WV-SW155
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
For U.S. and Canada:
WV-SW155, WV-SW155M, WV-SW152, WV-SW152M
For Europe and other countries: WV-SW155E, WV-SW155ME, WV-SW152E, WV-SW152ME
UL listed model No.
WV-SW155, WV-SW155M, WV-SW152, WV-SW152M
For Canada
This Class A digital apparatus complies with Canadian ICES-003.
For U.S.A
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
For U.S.A
The serial number of this product may be found on the surface of the unit.
You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
For Europe
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standard or other normative document following the provisions of Directive 2004/108/EC.
Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Norm oder normativen Dokument übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2004/108/EC.
Nous déclarons sous notre propre responsabilité que le produit auquel se réfère la présente déclaration est conforme á la norme spécifiée ou à tout autre document normatif conformément aux dispositions de la directive 2004/108/CE.
Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con la norma u otro documento normativo siguiendo las estipulaciones de la directiva 2004/108/CE.
Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme al seguente standard o altro documento normativo conforme alle disposizioni della direttiva 2004/108/CE.
Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende norm of ander normatief dokument, overeenkomstig de bepalingen van Richtlijn 2004/108/ EC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med standard eller andre normative dokumenter i følge bestemmelserne i direktiv 2004/108/EC.
Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument eller annat normativt dokument som framställs i direktiv 2004/108/ EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavaa standardia tai muuta ohjeellista asiakirjaa, jotka noudattavat direktiivin 2004/108/EC säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende norm eller andre normgivende dokumenter som følger bestemmelsene i direktiv 2004/108/EC.
2
|
Contents |
Important safety instructions......................................................................................................... |
4 |
Limitation of liability....................................................................................................................... |
5 |
Disclaimer of warranty................................................................................................................... |
5 |
Preface........................................................................................................................................... |
6 |
Main functions................................................................................................................................ |
6 |
About the user manuals................................................................................................................. |
7 |
About notations.............................................................................................................................. |
7 |
System requirements for a PC....................................................................................................... |
7 |
Trademarks and registered trademarks......................................................................................... |
8 |
Copyright....................................................................................................................................... |
8 |
Network security............................................................................................................................ |
9 |
Precautions.................................................................................................................................. |
10 |
Precautions for installation........................................................................................................... |
13 |
Major operating controls.............................................................................................................. |
15 |
Removing the dome cover base.................................................................................................. |
16 |
Preparations................................................................................................................................. |
17 |
Insert/remove an SDHC/SD memory card................................................................................... |
22 |
Connection................................................................................................................................... |
23 |
Installation.................................................................................................................................... |
26 |
Adjustment................................................................................................................................... |
29 |
Attaching the dome cover............................................................................................................ |
31 |
Using the CD-ROM...................................................................................................................... |
32 |
Configure the network settings.................................................................................................... |
35 |
Troubleshooting........................................................................................................................... |
37 |
Specifications............................................................................................................................... |
38 |
Standard accessories.................................................................................................................. |
41 |
Optional accessories................................................................................................................... |
41 |
3
Important safety instructions
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
6)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
7)Only use attachments/accessories specified by the manufacturer.
8)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
S3125A
9)Unplug this apparatus during lightning storms or when unused for long periods of time.
10)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
4
Limitation of liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Disclaimer of warranty
IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
(1)ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2)PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3)ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THE MALFUNCTION OR TROUBLE;
(4)INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5)ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
(6)ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE;
(7)LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE.
5
Preface
The network cameras WV-SW155/WV-SW155M/WV-SW152/WV-SW152M are designed to operate using a PC on a network (10BASE-T/100BASE-TX), and can be installed under eaves (sheltered outdoor).
By connecting to a network (LAN) or the Internet, images from the camera can be monitored on a PC via a network.
SW155 SW155M
• Maximum image capture size: 1280x960 (Aspect 4:3), 1280x720 (Aspect 16:9)
SW152 SW152M
• Maximum image capture size: 800x600 (Aspect 4:3), 640x360 (Aspect 16:9)
Note:
•It is necessary to configure the network settings of the PC and its network environment to monitor images from the camera on the PC. It is also necessary to install a web browser on the PC.
Main functions
Introduction of Super Dynamic
( Operating Instructions (included in the CD-ROM))
Super Dynamic compensates brightness on a pixel-to-pixel basis so that it produces clearer images even if objects have various illumination intensities.
H.264 and JPEG double encoding
The 2 types of H.264 stream outputs and the JPEG output can be simultaneously provided.
Power over Ethernet function
When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply connecting a LAN cable. (IEEE802.3af compliant)
Adaptive darkness correction mode
Corrects the blacked-out parts of dark areas of objects that have different illumination intensities.
SDHC/SD memory card slot equipped
It is possible to save H.264 videos and JPEG images on the SDHC/SD memory card manually at an alarm occurrence, during the period of the schedule, or on a web browser. It is also possible to save JPEG images at a network failure occurrence. (Download is possible.)
(Recommended SDHC/SD memory card page 40)
6
About the user manuals
There are 2 sets of operating instructions for the WV-SW155, WV-SW155M, WV-SW152, WV-SW152M (P model), WV-SW155E, WV-SW155ME, WV-SW152E, WV-SW152ME (E model) as follows.
•Installation Guide: Explains how to install and connect devices.
•Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera.
"WV-SW155, WV-SW155M, WV-SW152, WV-SW152M" or "SW155, SW155M, SW152, SW152M" shown in the instructions and illustrations used in these operating instructions indicates the WV-SW155, WV-SW155M, WV-SW152, WV-SW152M, WV-SW155E, WV-SW155ME, WV-SW152E, WV-SW152ME.
The screens used in these operating instructions show the cases of P models.
About notations
The following notations are used when describing the functions limited for specified models. The functions without the notations are supported by all models.
SW155 : The functions with this notation are available when using the model WV-SW155. SW155M : The functions with this notation are available when using the model WV-SW155M. SW152 : The functions with this notation are available when using the model WV-SW152. SW152M : The functions with this notation are available when using the model WV-SW152M.
System requirements for a PC
CPU: |
Intel® CoreTM 2 Duo 2.4 GHz or faster recommended |
Memory: |
512 MB or more (A minimum of 1 GB memory is required when using |
|
Microsoft® Windows® 7 or Microsoft® Windows Vista®.) |
Network interface: |
10BASE-T/100BASE-TX 1 port |
Monitor: |
Image capture size: 1024 x 768 pixels or more |
|
Color: 24-bit True color or better |
OS: |
Microsoft® Windows® 7 |
|
Microsoft® Windows Vista® |
|
Microsoft® Windows® XP SP3 |
Web browser: |
Windows® Internet Explorer® 9.0 (32-bit) |
|
Windows® Internet Explorer® 8.0 (32-bit) |
|
Windows® Internet Explorer® 7.0 (32-bit) |
|
Microsoft® Internet Explorer® 6.0 SP3 |
Others: |
CD-ROM drive |
|
(It is necessary to read the operating instructions and use the software on |
|
the provided CD-ROM.) |
|
DirectX® 9.0c or later |
|
Adobe® Reader® |
|
(It is necessary to view the PDF file on the provided CD-ROM.) |
7
Important:
•When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable.
•Microsoft® Windows® 7 Starter, Microsoft® Windows Vista® Starter and Microsoft® Windows® XP Professional 64-bit Edition are not supported.
•When using IPv6 for communication, use Microsoft® Windows® 7 or Microsoft® Windows Vista®.
Note:
•Refer to "Notes on Windows Vista® / Windows® 7" on the provided CD-ROM for further information about system requirements for a PC and precautions when using Microsoft® Windows® 7 or Microsoft® Windows Vista®.
•If using Microsoft® Windows® XP, screen tearing* may occur when the shooting scene drastically changes (for example, while shooting fast-moving subjects) due to the GDI restrictions of the OS.
*A phenomenon in which portions of the screen are displayed out of alignment
•For information on the operation verification of the supported operating systems and web browsers, refer to our website at http://panasonic.net/pss/security/support/index.html.
Trademarks and registered trademarks
•Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
•Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
•Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
•SDHC Logo is a trademark of SD-3C, LLC.
•All other trademarks identified herein are the property of their respective owners.
Copyright
Distributing, copying, disassembling, reverse compiling and reverse engineering of the software provided with this product are all expressly prohibited. In addition, exporting any software provided with this product violating export laws is prohibited.
8
Network security
As you will use this unit connected to a network, your attention is called to the following security risks.
q Leakage or theft of information through this unit
w Use of this unit for illegal operations by persons with malicious intent
e Interference with or stoppage of this unit by persons with malicious intent
It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks.
•Use this unit in a network secured by a firewall, etc.
•If this unit is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.).
•Protect your network against unauthorized access by restricting users to those who log in with an authorized user name and password.
•Apply measures such as user authentication to protect your network against leakage or theft of information, including image data, authentication information (user names and passwords), alarm mail information, FTP server information and DDNS server information.
•After the unit is accessed by the administrator, make sure to close the browser.
•Change the administrator password periodically.
•Do not install the camera in locations where the camera or the cables can be destroyed or damaged by persons with malicious intent.
9
Precautions
Refer installation work to the dealer.
Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to this product.
Be sure to consult the dealer.
Stop the operation immediately when something is wrong with this product.
When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product has deteriorated, continued use will cause a fire or fall of the product resulting in injury, accidents, or damage to the product.
Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble or modify this product.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Do not insert any foreign objects.
This could permanently damage this product. Turn the power off immediately and contact qualified service personnel for service.
Select an installation area that can support the total weight.
Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in injury.
Installation work shall be started after sufficient reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.
Consult the dealer for the inspections.
Do not use this product in an inflammable atmosphere.
Failure to observe this may cause an explosion
resulting in injury.
Avoid installing this product in the locations where salt damage occurs or corrosive gas is produced.
Otherwise, the mounting portions will deteriorate and accidents such as a fall of the product may occur.
Install this product in a location high enough to avoid people and objects from bumping the product.
Failure to observe this may cause a drop resulting in injury or accidents.
Do not strike or give a strong shock to this product.
Failure to observe this may cause fire or injury. Shock resistance grade (50J IEC60068-2-75 or equivalent) is applied to this product only when it is installed correctly as described in these operating instructions and appropriate shock resistance treatment is applied.
Turn the power off when do wiring of this product.
Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.
The exclusively designed mount bracket shall be used.
Failure to observe this may cause a drop resulting in injury or accidents.
Use the exclusively designed mount bracket for installation.
The screws and bolts must be tightened to the specified torque.
Failure to observe this may cause a drop resulting in injury or accidents.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
10
Do not touch this product or the connected cables during thunder. (even in the process of work)
Failure to observe this may cause electric shock.
Turn the power off when cleaning this product.
Failure to observe this may cause injury.
[Precautions for use]
This product has no power switch.
When turning off the power, turn off a PoE hub or remove a network cable.
To keep on using with stable performance
Do not use this product in hot and humid conditions for a long time. Failure to observe this causes component degradation resulting in life shortening of this product.
Do not expose the product to direct heat sources such as a heater.
Do not touch the dome with your bare hands.
A dirty dome causes deterioration of picture quality.
Handle this product with care.
Do not drop this product, nor apply shock or vibration to the product. Failure to observe this may cause trouble. If a strong shock or vibration is applied to the dome cover, it may cause damage or allow water to enter this product.
About the PC monitor
Displaying the same image on a monitor for a long time may damage the monitor. It is recommended to use a screen-saver.
When an error is detected, this product will restart automatically.
This product will be inoperable for around 2 minutes after the restart just as when the power is turned on.
Product disposal/transfer
Data saved on this product or a storage device used with this product may lead to personal information leakage.
When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on this product.
Cleaning this product body
Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration.
Cleaning the lens
Use a lens cleaning paper (used to clean camera lenses or lenses of spectacles). When using solvent, use an alcohols solvent and do not use a thinner or a glass cleaner.
Transmission interval
Image transmission interval may become slow depending on the network environment, PC performance, shooting subject, access number, etc.
About SDHC/SD memory card
•Before inserting the SDHC/SD memory card, turn off the power of this product first. Otherwise, it may cause malfunction or damage data recorded on the SDHC/ SD memory card. Refer to page 22 for descriptions of how to insert/remove an SDHC/SD memory card.
•When using an SDHC/SD memory card, format it using this product. Recorded data on the SDHC/SD memory card will be deleted when formatted. If an unformatted SDHC/SD memory card or an SDHC/SD memory card formatted with other devices is used, this product may not work properly or performance deterioration may be caused. Refer to the Operating Instructions (included in the CD-ROM) for how to format a SDHC/SD memory card.
11
•When some SDHC/SD memory cards are used with this product, the product may not work properly or performance deterioration may be caused. Use the SDHC/SD memory cards recommended in page 40.
Code label
The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recommended to paste one of the labels onto the CD-ROM case.
About the MOS image sensor
•When continuously shooting a bright light source such as a spotlight, the color filter of the MOS image sensor may have deteriorated and it may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discoloration may remain.
•When shooting fast-moving subjects or performing panning/tilting operations, objects crossing the shooting area may look to be bending askew.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE http://www.mpegla.com.
Flickering
Due to the influence of lighting, flickering may sometimes happen. In this case, select "Indoor scene" for "Light control mode". Select "Indoor scene(50Hz)" or "Indoor scene(60Hz)" in accordance with the power supply frequency in your locality. Refer to the Operating Instructions (included in the CD-ROM) for further information about the setting.
Under extremely strong lighting, flickering may happen even when "Indoor scene" is selected for "Light control mode".
When the brightness (illuminance) level on the screen is set to a relatively low level with the [Brightness] buttons, flickering may frequently happen. In such cases, either of the following can reduce flickering.
•Moderate the illumination intensities of objects by changing the camera direction.
•Set the brightness (illuminance) level on the screen to a brighter level with the [Brightness] buttons.
White-out on images caused by the effect of light control mode
When "Indoor scene" is selected for "Light control mode", the tone of the brighter parts on the screen may be deteriorated than the case when "ELC" is selected.
Color blurring on detailed drawing patterns
When there are detailed drawing patterns on images, color blurring may happen over these parts.
Operating temperature
This product can be used in low temperature outdoor environments that get as cold as
–30 °C {-22 °F}. However, when this product is installed and operated in temperatures below –20 °C {-4 °F}, normal images may not be obtained immediately after startup. In such a case, connect the power and wait approx.
2 hours, and then connect the power again.
12
Precautions for installation
Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.
This product is designed to be installed under eaves.
Install the product under eaves to avoid direct sunlight.
Installing place
Contact your dealer for assistance if you are unsure of an appropriate place in your particular environment.
•Make sure that the installation area is strong enough to hold this product, such as a concrete ceiling.
•Install the camera in the foundation area of the architecture or where sufficient strength is assured.
•If a ceiling board such as plaster board is too weak to support the total weight, the area shall be sufficiently reinforced.
Do not place this product in the following places:
•Locations where a chemical agent is used such as a swimming pool
•Locations subject to humidity, dust, steam and oil smoke
•Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated
•Locations where corrosive gas is produced, locations where it may be damaged by briny air such as seashores
•Locations where the temperature is not within the specified range (page 38).
•Locations subject to vibrations that exceed the railway specifications (EN50155)
•If a ceiling board such as plaster board is too weak to support the total weight, the area shall be sufficiently reinforced.
Be sure to remove this product if it is not in use.
Design and engineer the power supply system to turn on/off the power of this product.
The product has no power switch. When installing the product, use a PoE hub equipped with the ON-OFF switch for servicing.
About the network connection
When connecting to a network using the network cable of this product, observe the following.
•When wiring for the network, design and engineer not to be affected by thunder.
•It is impossible to install this product in combination with a pan/tilt head.
Screw tightening
•The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area.
•Do not use an impact driver. Use of an impact driver may damage the screws or cause tightening excessively.
•When a screw is tightened, make the screw at a right angle to the surface. After tightening the screws or bolts, perform visual check to ensure tightening is enough and there is no backlash.
Procure fixing screws separately.
The screws that secure this product are not supplied. Prepare them according to the material and strength of the area where the product is to be installed.
13
Do not remove or loosen the internal camera screws
Do not loosen the internal camera screws. Otherwise, water exposure may cause damage or malfunction of camera, or camera dropping may result in injury.
Radio disturbance
When this product is used near TV/radio antenna, strong electric field or magnetic field (near a motor, a transformer or a power line), images may be distorted and noise sound may be produced.
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with IEEE802.3af standard.
Router
When connecting this product to the Internet, use a broadband router with the port forwarding function (NAT, IP masquerade).
Refer to the Operating Instructions (included in the CD-ROM) for further information about the port forwarding function.
Time & date setting
It is necessary to set the time & date before putting this product into operation. Refer to the Operating Instructions on the provided CD-ROM for descriptions of how to perform the settings.
14
Loading...