Concerning Compact Discs
Only compact discs bearing this mark can be used with this unit.
However, continued use of irregular shaped CDs can damage the unit.
How to remove a disc from its case How to store the disc in its case
Label side up
How to hold a disc
Portable CD player
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
The model number and serial number of this product can be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future reference. MODEL NUMBER
SERIAL NUMBER
Operating Instructions
Model No. SL-SX293
SL-SX290
If the surface is dirty
Wipe it with a damp cloth and then wipe dry.
Wipe from the center toward the outer circumference.
Play surface (shiny surface)
Handling precautions
≥If you are taking the CD from a cold to a warm environment, moisture may form on the CD. Wipe this off with a soft, dry, lint-free cloth before using the CD.
≥Do not write on the label side with a ball-point pen or other writing instrument.
≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.
≥Do not attach labels or stickers to CDs. (Do not use CDs with exposed adhesive from tape or left over peeled off stickers.)
≥Do not use scratch-proof protectors etc.
Storage precautions
Be sure to store CDs in their cases to protect them from dust, scratches, and warping.
Do not place or store CDs in the following places
≥Locations exposed to direct sunlight ≥Humid or dusty locations
≥Locations directly exposed to a heat vent or heating appliance
≥In the glove compartment or on the rear deck of an automobile
Supplied Accessories
Check the packing carton for these accessories.
SL-SX290
Stereo headphones (RFEV715P-KS) . . . . . . . . . . . . . . . 1
SL-SX293
Stereo headphones (L0BAD0000160). . . . . . . . . . . . . . . 1
Use numbers indicated in parentheses when asking for replacement parts.
To order accessories contact 1-800-332-5368 or web site (http://www.panasonic.com).
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
|
|
P |
|
|
|
Panasonic Consumer Electronics Company, |
p |
|
Division of Matsushita Electric Corporation of America |
||
One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com |
|
|
Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
|
C 2002 Matsushita Electric Industrial Co., Ltd. |
RQT6442-P F0102TH0 |
|
|
Printed in Japan |
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instructions handy for future reference.
Safety
1.Power source—Connect the unit to a power source of the type described in these instructions or as marked on the unit.
2.Polarization—The unit is equipped with a polarized power plug where one blade is wider than the other. This safety feature ensures that the plug fits into your household AC outlet only one way. If the plug doesn’t fit one way, try reversing it. If the plug still doesn’t fit, contact an electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the plug.
3.Power cord protection—Route the AC power supply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or cord with wet hands. Always grasp the plug body firmly when connecting and disconnecting it.
4.Overloading—When connecting the AC power supply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this can result in fire or electric shock.
5.Nonuse periods—Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms. Leaving the unit connected to a household AC outlet for extended periods can cause battery fluid leakage.
6.Attachments and accessories—Use only the attachments and accessories recommended in these operating instructions.
Installation
Placement
1.Foreign material—Ensure objects and liquids do not get into the unit. Avoid exposing the unit to excessive smoke, dust, mechanical vibration, and shock.
2.Magnetism—Situate the unit away from equipment and devices that generate strong magnetic fields.
3.Stacking—Do not place anything on top of this unit.
4.Wall and ceiling mounting—Do not mount the unit on walls or ceilings unless specified in the instructions.
Environment
1.Water and moisture—Do not use the unit near water, such as near a bathtub or swimming pool. Avoid damp basements.
2.Heat—Situate the unit away from heat sources, such as radiators. Do not leave it in an automobile
exposed to direct sunlight with the doors and windows closed as this may deform the cabinet.
2.Do not situate where temperatures fall below 5 oC (41 oF) or rise above 35 oC (95 oF).
Maintenance
(See page 6 for details.)
Unplug the unit from the household AC outlet before cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring powders, or solvents.
Service
1.Damage requiring service—The unit should be serviced by qualified service personnel if:
1.(a) The AC power supply cord or AC adaptor has been damaged; or
1.(b) Objects or liquids have gotten into the unit; or
1.(c) The unit has been exposed to rain; or
1.(d) The unit does not operate normally or exhibits a marked change in performance; or
1.(e) The unit has been dropped or the cabinet damaged.
2.Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.
3.Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4.Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
This manual was printed with soy based ink
Power Supply Preparations
Refer to the specifications (page 6) for information on operating times when using dry cell batteries.
Using dry cell batteries (not included)
Insert two “LR6, AA, UM-3” alkaline batteries.
|
|
2 |
|
1 |
3 |
- |
|
+ |
|||
|
|
||
If the battery lid |
Removing batteries |
||
comes loose |
Push up on the battery |
||
Slide the lid back into |
in the direction indicat- |
||
place horizontally. |
ed by the arrow. Then |
||
|
lift it out. |
|
|
Note!
The dry cell batteries should be changed when the unit is off.
Using rechargeable batteries (not included)
≥If rechargeable batteries are to be used, rechargeable batteries manufactured by Panasonic are recommended.
≥This unit cannot recharge batteries. The battery indicator will not function correctly when using rechargeable batteries.
Using the AC adaptor (not included)
Use only the recommended AC adaptor. Use of other AC adaptors can damage the unit.
To order the optional AC adaptor RP-AC46 contact 1- 800-332-5368 or web site (http://www.panasonic.com).
Connect the AC adaptor.
DC IN jack (DC IN 4.5 V K)
Household AC outlet
Back panel of the unit
AC adaptor
Conserving power
To save power when the unit is not to be used for a long time, unplug the AC adaptor from the household AC outlet. Reprogram tracks if necessary before use.
Note!
Turn the unit off before connecting or disconnecting the AC adaptor.
If the unit malfunctions or freezes during use, disconnect the power source (the AC adaptor or batteries).
Re-connect the power source and continue operation.
Battery indicator
C S-XBSTRAIN
Battery indicator |
ALL1 M |
RANDOM
SORRY
This indicator flashes when the batteries are almost out of power. Power is cut off completely a short while later. Replace batteries with new ones.
Note!
The length of time the unit will continue to operate between when the battery indicator starts flashing and when the power is cut off differs depending on the type of batteries used.
Using the car adaptor (not included)
Use only the recommended car adaptor. Use of other car adaptors can damage the unit.
Be sure to obtain the car adaptor (SH-CDC9) available as an optional accessory.
CAUTION:
Use only car adaptor, Model: SH-CDC9 manufactured by Matsushita Electric Industrial Co.,Ltd.
Location of Controls
A B C D
C
E
F
I J K L
Back panel of the unit
G H G
M N
HOLD Function
HOLD
HOLD mode
A Display |
I Hold switch (HOLD) |
B Memory/recall button |
J Headphone jack (Ë) |
(MEMORY/RECALL) |
K CD release button (PUSH) |
C Headphone volume control |
L Open switch (OPEN 1) |
buttons (VOL i,j) |
M Hole for car mounting base |
D EQ button (EQ) |
N DC IN jack |
E Mode button (MODE) |
(DC IN 4.5 V K) |
F Play/pause button (1;) |
|
G Skip/search buttons |
|
(:, 9 6 , 5) |
|
H Stop/operation off button |
|
(∫,OPR OFF) |
|
This function causes the unit to ignore short, accidental button presses. (The disc lid can still be opened and closed.)
The HOLD function prevents the following:
≥The unit is powered on accidentally when not in use, causing the batteries to run down.
≥A button is accidentally pressed during play, interrupting the operation.
To use the HOLD function
Set [HOLD] to the HOLD position.
“(” indication
When the unit is in HOLD mode, pressing any button causes the indication “(” to appear on the display.
When the unit is powered off
The “(” indication appears only when [1;] is pressed.
Before operating the buttons
Be sure to move [HOLD] to release the unit from the HOLD mode.
Loading...