NAIS JV1F-18V, JV1F-12V, JV1F-100V, JV1aS-6V, JV1aS-5V Datasheet

FLAT TYPE POWER RELAY JV-RELAYS

	22	16
	.866
		.630

10.9

.429

	FEATURES
	• Flat type: 16 mm (length)× 22 mm (width) × 10.9 mm (height)
	(.630×.866×.429 inch)
	• High capacity type (16A) available
	• High sensitivity type (100 mW: 1 Form A) available
mm inch	• TÜV also approved

SPECIFICATIONS

Contact

Standard type

High capacity

High

type

sensitivity type

Arrangement

1 Form A

1 Form C

1 Form A

1 Form A

Initial contact resistance, max.

50 mΩ

(By voltage drop 6 V DC 1 A)

Contact material

Silver alloy

Nominal switching

10 A 125 V AC

10 A 125 V AC (N.O.)

16 A 125 V AC

10 A 125 V AC

capacity

6 A 125 V AC (N.C.)

Rating

Max. switching power

1,250 VA

1,250 VA (N.O.)

2,000 VA

1,250 V

750 VA (N.C.)

(resistive)

Max. switching voltage

125 V AC

Max. switching current

10 A

10 A (N.O.)

16 A

10 A

6 A (N.C.)

Expected life (min. ope.)

107

Mechanical at (180 cpm)

Electrical at resistive

Sealed type

105

105

3×104

5×104

(at 20 cpm)

Flux-resistant

3×105

105

105

105

(at rated load)

type

Coil

1 Form A type

1 Form C type

Nominal

Standard type

200 mW (up to 48 V coil type)

400 mW (up to 48 V coil type)

600 mW (100 V coil type)

operating

600 mW (100 V coil type)

High capacity type

—

power

High sensitivity type

100 mW

—

Remarks

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage"section *2 Detection current: 10mA

*3 Excluding contact bounce time

*4 Half-wave pulse of sine wave: 11ms, detection time: 10 s *5 Half-wave pulse of sine wave: 6ms

*6 Detection time: 10 s

*7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). *8 100V type: –40 to + 60°C –40 to + 140°F

Characteristics

	Max. operating speed			20 cpm
	Initial insulation resis-			Min. 100 MΩ
	tance*1			(at 500 V DC)
	Initial	Between open		1,000 Vrms
	break-	contacts		for 1 min.
	down	Between con-		1,500 Vrms
	voltage*2	tacts and coil		for 1 min.
	Operate time*3			Approx. 10 ms
				Approx. 5 ms
	(at nominal voltage)
				(100 V DC coil type)
	Release time (without diode)*3			Approx. 4 ms
	(at nominal voltage)
				Max. 65°C with nominal
	Temperature rise			coil voltage across
	(at 50°C)			coil and at nominal
				switching capacity
	Shock	Functional*4		Min. 98 m/s2 {10 G}
				Min. 980 m/s2
	resistance	Destructive*5
				{100 G}
				10 to 55 Hz
		Functional*6		at double amplitude
	Vibration			of 1.0 mm
	resistance			10 to 55 Hz
		Destructive		at double amplitude
				of 1.6 mm
	Conditions for opera-		Ambient	–40°C to +70°C*8
	tion, transport and		temp.	–40°F to +158°F
	storage*7
	(Not freezing and		Humidity	5 to 85%R.H.
	condensing at low
	temperature)
	Unit weight			Approx. 8 g .282 oz

TYPICAL APPLICATIONS

1.Home appliances: Air conditioner, heater, etc.

2.Automotive: Power supply for car stereo and air conditioner

ORDERING INFORMATION

Ex. JV

1a

P

F

S

12V

Contact arrangement

Rating

Protective construction

Sensitivity

Coil voltage (DC)

Nil: Standard type

1: 1 Form C

Nil: Standard type

Nil: Sealed type

(1 Form A: 200 mW, 1Form C: 400 mW

5, 6, 9, 12, 18,

100 V DC coil type: 600 mW)

1a: 1 Form A

P: High capacity type*

F: Flux-resistant type

24, 48, 100V

S: High sensitivity type*

(1 Form A: 100 mW)

Notes: 1. Standard packing: Carton: 50 pcs.; Case: 1,000 pcs.

* Only for 1 Form A type

2. Coil voltage DC 48, 100 V types are not available for high sensitivity type.

UL/CSA, TÜV approved type is standard.

87

JV

TYPES

Contact arrangement			Coil voltage, V DC						Part No.
							Sealed type				Flux-resistant type
			5					JV1a-5V			JV1aF-5V
			6					JV1a-6V			JV1aF-6V
			9					JV1a-9V			JV1aF-9V
1 Form A			12					JV1a-12V			JV1aF-12V
Standard type			18					JV1a-18V			JV1aF-18V
			24					JV1a-24V			JV1aF-24V
			48					JV1a-48V			JV1aF-48V
			100				JV1a-100V				JV1aF-100V
			5					JV1aP-5V			JV1aPF-5V
			6					JV1aP-6V			JV1aPF-6V
			9					JV1aP-9V			JV1aPF-9V
1 Form A			12				JV1aP-12V				JV1aPF-12V
High capacity type			18				JV1aP-18V				JV1aPF-18V
			24				JV1aP-24V				JV1aPF-24V
			48				JV1aP-48V				JV1aPF-48V
			100				JV1aP-100V				JV1aPF-100V
			5					JV1aS-5V			JV1aFS-5V
			6					JV1aS-6V			JV1aFS-6V
1 Form A			9					JV1aS-9V			JV1aFS-9V
High sensitivity type			12				JV1aS-12V				JV1aFS-12V
			18				JV1aS-18V				JV1aFS-18V
			24				JV1aS-24V				JV1aFS-24V
			5						JV1-5V		JV1F-5V
			6						JV1-6V		JV1F-6V
			9						JV1-9V		JV1F-9V
1 Form C			12					JV1-12V			JV1F-12V
			18					JV1-18V			JV1F-18V
			24					JV1-24V			JV1F-24V
			48					JV1-48V			JV1F-48V
			100					JV1-100V			JV1F-100V
COIL DATA (at 20°C 68°F)
		Nominal voltage,			Pick-up voltage,				Drop-out		Coil resistance,		Nominal operat-		Nominal	Max. allowable
Part No.									voltage,				ing current, mA		operating power,	voltage,
			V DC		V DC (max.)						Ω (±10%)
									V DC (min.)				(±10%)		mW	V DC
			5		4.0				0.25		125		40		200	7.5
			6		4.8				0.3		180		33.3		200	9
1 Form A			9		7.2				0.45		405		22.2		200	13.5
			12		9.6				0.6		720		16.7		200	18
(Standard type &
High capacity			18		14.4				0.9		1,620		11.1		200	27
type)
			24		19.2				1.2		2,880		8.3		200	36
			48		38.4				2.4		11,520		4.2		200	72
			100		48				3		16,600		6		600	110
			5		4.0				0.25		250		20		100	9
1 Form A			6		4.8				0.3		360		16.7		100	10.8
			9		7.2				0.45		810		11.1		100	16.2
(High sensitivity
			12		9.6				0.6		1,440		8.3		100	21.6
type)
			18		14.4				0.9		3,240		5.6		100	32.4
			24		19.2				1.2		5,760		4.2		100	43.2
			5		4.0				0.25		62.5		80		400	6.5
			6		4.8				0.3		90		66.7		400	7.8
			9		7.2				0.45		202.5		44.4		400	11.7
1 Form C			12		9.6				0.6		360		33.3		400	15.6
			18		14.4				0.9		810		22.2		400	23.4
			24		19.2				1.2		1,440		16.7		400	31.2
			48		38.4				2.4		5,760		8.3		400	62.4
			100		70				5		16,600		6		600	110

88