SX
TESTING
HIGH SENSITIVITY RELAY
WITH GUARANTEED LOW SX-RELAYS
LEVEL SWITCHING CAPACITY
7.4
15.0 .291
.591 8.2
.323
7.4
15.0 .291
.591
Max. 10.0
.394
FEATURES
1. High contact reliability over a long life has been made possible for low level loads.
Using a low level load (1 mV 10µA to 10 V 10 mA) 107 operations were achieved with a static contact resistance of Max. 100 mΩ (voltage drop of 20 mV, 1 mA, 1 kHz) and a dynamic contact resistance of Max. 1 Ω (Measurement delay 10 ms, voltage drop of 20 mV, 1 mA, 1 kHz).
2. High sensitibity of 50 mW
By using the highly efficient polar magnetic circuit "seesaw balance armature mechanism", a rated power consumption of 50 mW (for single side stable type) has been achieved.
3. Low thermal electromotive force
Reducing the heat from the coil enables a thermal electromotive force of 3 µV or less.
mm inch
SPECIFICATIONS
Contact
Arrangement |
|
2 Form C |
|
|
|
||
Static contact resistance (During initial and |
Max. 100 mΩ |
||
electric life tests)*1 |
|||
(By voltage drop of 20 mV 1 mA [1kHz]) |
|
||
Dynamic contact resistance (During initial and |
|
||
electric life tests)*1 |
Max. 1 Ω |
||
(By voltage drop of 20 mV 1 mA[1 kHz], Mea- |
|||
surement delay 10 ms after applying nominal |
|
||
coil voltage) |
|
|
|
Contact material |
Gold-clad silver alloy |
||
|
|
|
|
|
Nominal switching capacity |
10 mA 10 VDC |
|
|
(resistive load) |
||
|
|
||
Rating |
Max. switching power |
0.1 W |
|
|
|
||
Max. switching voltage |
10 VDC |
||
|
|||
|
|
|
|
|
Max. switching current |
10 mA DC |
|
|
|
|
|
|
Min. switching capacity**1 |
10 µA 1 mVDC |
|
|
Single side stable |
50mW (1.5 to 12 V DC) |
|
|
70mW (24 V DC) |
||
Nominal |
|
||
|
35mW (1.5 to 12 V DC) |
||
operating |
1 coil latching |
||
50mW (24 V DC) |
|||
power |
|
||
|
|
||
2 coil latching |
70mW (1.5 to 12 V DC) |
||
|
|||
|
150mW (24 V DC) |
||
|
|
||
|
|
|
|
Thermal electromotive force, max. |
3 µV |
||
(at nominal voltage applied to the coil**2) |
|||
|
|||
Expected |
Mechanical (at 750 cpm) |
5 × 107 |
|
life (min. |
Electrical (at 750 cpm) |
107 |
|
operations) |
(10 mA 10 V DC resistive load) |
||
|
|||
|
|
|
Notes:
**1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
**2 For single side stable only.
Characteristics
Initial insulation resistance*2 |
Min. 10,000MΩ |
||||
(at 500V DC) |
|||||
|
|
|
|
||
|
|
|
|
|
|
Initial |
Between open contacts |
750 Vrms for 1min. |
|||
|
|
|
|||
breakdown |
Between contact sets |
1,000 Vrms for 1min. |
|||
voltage*3 |
|
|
|
||
Between contact and coil |
1,800 Vrms for 1min. |
||||
|
|
||||
|
|
|
|
|
|
Operate time [Set time]*4 (at 20°C) |
Max. 5 ms (Approx. 3 ms) |
||||
[Max. 5 ms (Approx. 3 ms)] |
|||||
|
|
|
|
||
Release time (without diode) |
Max. 5 ms (Approx. 1.5 ms) |
||||
[Reset time]*4 (at 20°C) |
|
[Max. 5 ms (Approx. 3 ms)] |
|||
Temperature rise*5 (at 20°C) |
Max. 50°C |
||||
Shock resistance |
Functional*6 |
Min. 750 m/s2{75G] |
|||
Destructive*7 |
Min. 1,000 m/s2{100G] |
||||
|
|
|
|||
|
|
|
Functional*8 |
10 to 55 Hz at double |
|
|
|
|
amplitude of 3.3 mm |
||
Vibration resistance |
|
||||
Destructive |
10 to 55 Hz at double |
||||
|
|
|
|||
|
|
|
amplitude of 5 mm |
||
|
|
|
|
||
|
|
|
|||
Conditions for operation, |
Ambient |
–40°C to 70°C |
|||
transport and storage*9 |
temperature |
–40°F to 158°F |
|||
(Not freezing and con- |
|
|
|||
densing at low tempera- |
Humidity |
5 to 85% R.H. |
|||
ture) |
|
|
|
||
Unit weight |
|
|
Approx. 2 g .071 oz |
||
|
|
|
|
||
Remarks: |
|
|
|
||
* |
Specifications will vary with foreign standards certification ratings. |
||||
*1 |
By nominal switching capacity: No. of operations: 107 |
||||
*2 |
Measurement at same location as "Initial breakdown voltage" section. |
||||
*3 |
Detection current: 10mA. |
|
|
||
*4 |
Nominal voltage applied to the coil, excluding contact bounce time. |
||||
*5 |
By resistive method, nominal voltage applied to the coil; contact carrying current: |
||||
|
10mA. |
|
|
|
|
*6 |
Half-wave pulse of sine wave: 6 ms; detection time: 10 s. |
||||
*7 |
Half-wave pulse of sine wave: 6 ms. |
|
|||
*8 |
Detection time: 10 s. |
|
|
||
*9 |
Refer to 5. Conditions for operation, transport and storage mentioned in |
||||
|
AMBIENT ENVIRONMENT (Page 61) |
|
TYPICAL APPLICATIONS
This relay will be used for the small load for measuring instruments or others where a stable contact resistance is required.
120
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SX |
|
ORDERING INFORMATION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ex. ASX |
2 |
|
0 |
|
|
0 |
|
A |
|
1 |
|
H |
|
|
Z |
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contact arrangement |
Operating function |
Type of operation |
|
|
|
|
Terminal shape |
|
|
|
|
Coil voltage (DC) |
Packing style |
|
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
2: 2 Form C |
0: Single side stable |
0: Standard type |
|
|
|
Nil: Standard PC board terminal |
1H: 1.5V |
09 |
: 9V |
Nil: Tube packing |
|
||||||||||||||||||||||||||
|
|
1: 1 coil latching |
|
(B.B.M.) |
|
|
|
A: Surface-mount terminal |
|
|
|
|
03 : 3V |
12 |
: 12V |
Z: Tape and reel packing |
|
||||||||||||||||||||
|
|
2: 2 coil latching |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4H: 4.5V |
24 |
: 24V |
(piked from 8/9/10/12 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
06 : 6V |
|
|
pin side) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available. Suffix “X” instead of “Z”.
TYPES AND COIL DATA (at 20°C 68°F)
(1) Standard PC board terminal
1)Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package
2)Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. Single side stable
Part No. |
|
Pick-up voltage, |
Drop-out |
Nominal |
|
Nominal |
Max. allowable |
|
|
Coil Rating, |
voltage, |
Coil resistance, |
|||||
|
||||||||
Standard PC |
V DC (max.) |
operating current, |
operating power, |
voltage, |
||||
V DC |
V DC (min.) |
Ω (±10%) |
||||||
board terminal |
(initial) |
mA (±10%) |
mW |
V DC |
||||
|
(initial) |
|
||||||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
ASX2001H |
1.5 |
1.2 |
0.15 |
33.3 |
45 |
50 |
2.25 |
|
|
|
|
|
|
|
|
|
|
ASX20003 |
3 |
2.4 |
0.3 |
16.7 |
180 |
50 |
4.5 |
|
|
|
|
|
|
|
|
|
|
ASX2004H |
4.5 |
3.6 |
0.45 |
11.1 |
405 |
50 |
6.75 |
|
|
|
|
|
|
|
|
|
|
ASX20006 |
6 |
4.8 |
0.6 |
8.3 |
720 |
50 |
9 |
|
|
|
|
|
|
|
|
|
|
ASX20009 |
9 |
7.2 |
0.9 |
5.6 |
1,620 |
50 |
13.5 |
|
|
|
|
|
|
|
|
|
|
ASX20012 |
12 |
9.6 |
1.2 |
4.2 |
2,880 |
50 |
18 |
|
|
|
|
|
|
|
|
|
|
ASX20024 |
24 |
19.2 |
2.4 |
2.9 |
8,229 |
70 |
36 |
|
|
|
|
|
|
|
|
|
1 coil latching
Part No. |
Coil Rating, |
Set voltage, |
Reset voltage, |
Nominal |
Coil resistance, |
Nominal |
Max. allowable |
|
Standard PC |
V DC (max.) |
V DC (max.) |
operating current, |
operating power, |
voltage, |
|||
V DC |
Ω (±10%) |
|||||||
board terminal |
(initial) |
(initial) |
mA (±10%) |
mW |
V DC |
|||
|
|
|||||||
ASX2101H |
1.5 |
1.2 |
1.2 |
23.3 |
64.3 |
35 |
2.25 |
|
ASX21003 |
3 |
2.4 |
2.4 |
11.7 |
257 |
35 |
4.5 |
|
ASX2104H |
4.5 |
3.6 |
3.6 |
7.8 |
579 |
35 |
6.75 |
|
ASX21006 |
6 |
4.8 |
4.8 |
5.8 |
1,029 |
35 |
9 |
|
ASX21009 |
9 |
7.2 |
7.2 |
3.9 |
2,314 |
35 |
13.5 |
|
ASX21012 |
12 |
9.6 |
9.6 |
2.9 |
4,114 |
35 |
18 |
|
ASX21024 |
24 |
19.2 |
19.2 |
2.1 |
11,520 |
50 |
36 |
2 coil latching
|
|
|
|
Nominal |
Coil resistance, |
Nominal |
|
|||||
Part No. |
|
Set voltage, |
Reset voltage, |
operating current, |
operating power, |
|
||||||
Coil Rating, |
Ω (±10%) |
Max. allowable |
||||||||||
|
V DC (max.) |
V DC (max.) |
mA (±10%) |
mW |
|
|||||||
|
V DC |
|
|
|
voltage, V DC |
|||||||
Standard PC |
(initial) |
(initial) |
Set coil |
Reset |
Set coil |
Reset |
Set coil |
|
Reset |
|||
|
|
|
||||||||||
board terminal |
|
|
|
coil |
coil |
|
coil |
|
||||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
ASX2201H |
1.5 |
1.2 |
1.2 |
46.7 |
46.7 |
32.1 |
32.1 |
70 |
|
70 |
2.25 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASX22003 |
3 |
2.4 |
2.4 |
23.3 |
23.3 |
129 |
129 |
70 |
|
70 |
4.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASX2204H |
4.5 |
3.6 |
3.6 |
15.6 |
15.6 |
289 |
289 |
70 |
|
70 |
6.75 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASX22006 |
6 |
4.8 |
4.8 |
11.7 |
11.7 |
514 |
514 |
70 |
|
70 |
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASX22009 |
9 |
7.2 |
7.2 |
7.8 |
7.8 |
1,157 |
1,157 |
70 |
|
70 |
13.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASX22012 |
12 |
9.6 |
9.6 |
5.8 |
5.8 |
2,057 |
2,057 |
70 |
|
70 |
18 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASX22024 |
24 |
19.2 |
19.2 |
6.3 |
6.3 |
3,840 |
3,840 |
150 |
|
150 |
36 |
|
|
|
|
|
|
|
|
|
|
|
|
|
121