TESTING
HIGH INSULATION RELAYS
(Conforming to the supplementary insulation class of EN Standards (EN41003))
TX-D RELAYS
15 |
7.4 |
|
.291 |
||
.591 |
||
|
8.2 |
|
|
.323 |
15 |
7.4 |
|
.591 |
.291 |
8.4
.333
mm inch
FEATURES
• Approved to the supplementary insulation class in the EN standards (EN41003).
The insulation distance between the contact and coil meet the supplementary insulation class of the EN41003 standards as required for equipment connected to the telephone lines in Europe.
Satisfies the following conditions:
•Clearances: 2.0 mm .079 inch or more
•Creepage distance: 2.5 mm .098 inch or more
•2,000 V breakdown voltage between contact and coil.
The body block construction of the coil that is molded by plastic offers a high breakdown voltage of 2,000 V between contact and coil, and 1,000 V between open contacts.
•Outstanding surge resistance.
Surge withstand between open contacts: 1,500 V 10×160 µsec. (FCC part 68)
Surge withstand between contact and coil: 2,500 V 2×10 µsec. (Bellcore)
•High sensitivity 200 mW.
•High contact capacity: 2 A 30 V DC (Standard type)
•Surface-mount type also available.
•M.B.B. type also available
•The use of gold-clad twin crossbar contacts ensures high contact reliability.
•Outstanding vibration and shock resistance.
Functional shock resistance: 750 m/s2 {75G}
Destructive shock resistance: 1,000 m/s2 {100G}
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3 mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm
.197 inch)
•Sealed construction allows automatic washing.
SPECIFICATIONS
Contact
|
|
|
|
Standard (B.B.M) |
M.B.B.type |
|
|
|
|
|
type |
||
|
|
|
|
|
||
Arrangement |
|
|
2 Form C |
2 Form D |
||
Initial contact resistance, max. |
100 mΩ |
|||||
(By voltage drop 6 V DC 1 A) |
||||||
|
|
|||||
Contact material |
Gold-clad silver |
|||||
|
|
Nominal switching |
2 A 30 V DC |
1 A 30 V DC |
||
|
|
capacity (resistive load) |
||||
|
|
|
|
|||
|
|
Max. switching power |
60 W |
30 W |
||
|
|
(resistive load) |
||||
|
|
|
|
|||
|
|
Max. switching voltage |
220 V DC |
110 V DC |
||
|
|
Max. switching current |
2 A |
1 A |
||
Rating |
|
Min. switching capacity 1 |
10 µA 10 mV DC |
|||
|
|
|
200 mW |
250 mW |
||
|
|
|
|
|||
|
|
|
Single side |
(1.5 to 12 V DC) |
(1.5 to 12 V DC) |
|
|
|
|
stable |
230 mW |
270 mW |
|
|
|
Nominal oper- |
|
(24 V DC) |
(24 V DC) |
|
|
|
ating power |
1 coil |
150 mW |
|
|
|
|
|
(1.5 to 12 V DC) |
— |
||
|
|
|
latching |
170 mW |
||
|
|
|
|
|||
|
|
|
|
(24 V DC) |
|
|
|
|
Mechanical (at 180 cpm) |
108 |
107 |
||
Expected |
|
|
|
105 (2 A 30 V DC |
|
|
life (min. |
|
Electrical (at 20 cpm) |
resistive), |
105 (1 A 30 V DC |
||
operations) |
|
5 ×105 (1 A 30 V |
resistive) |
|||
|
|
|
|
DC resistive) |
|
|
|
|
|
|
|
|
Notes:
1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
2The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40°C to +158°F.
Remarks
*Specifications will vary with foreign standards certification ratings.
*1 |
Measurement at same location as "Initial breakdown voltage" section. |
*2 |
Detection current: 10 mA |
*3 |
By resistive method; nominal voltage applied to the coil; contact carrying current: 2 A. |
*4 |
By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A. |
*5 |
Nominal voltage applied to the coil, excluding contact bounce time. |
*6 |
Nominal voltage applied to the coil, excluding contact bounce time without diode. |
*7 |
Half-wave pulse of sine wave: 6 ms.; detection time: 10 µs. |
*8 |
Half-wave pulse of sine wave: 11 ms.; detection time: 10 µs. |
*9 |
Half-wave pulse of sine wave: 6 ms. |
*10 |
Detection time: 10 µs. |
*11 |
Refer to 4. Conditions for operation, transport and storage mentioned in Cautions |
|
for use (Page 178). |
Characteristics
|
|
|
|
|
|
Standard (B.B.M) type |
|
|
|
|
|
|
|
M.B.B.type |
|||||
Initial insulation resistance*1 |
Min. 1,000 MΩ (at 500 V DC) |
||||||||||||||||||
|
|
Between open |
1,000 Vrms for 1 min. |
|
|
|
500 Vrms for 1 min. |
||||||||||||
Initial |
|
contacts |
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
break- |
|
Between contact |
2,000 Vrms for 1 min. |
||||||||||||||||
down |
|
and coil |
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
voltage*2 |
|
Between contact |
1,000 Vrms for 1 min. |
||||||||||||||||
|
|
||||||||||||||||||
|
|
sets |
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
Initial |
|
Between con- |
1,500 V |
|
|
|
|
|
|
|
|
– |
|||||||
|
tacts, 10 ×160 µs |
[FCC Part 68] |
|
|
|
|
|
|
|
|
|||||||||
surge |
|
|
|
|
|
|
|
|
|
|
|||||||||
|
Between contact |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
voltage |
|
2,500 V [Bellcore] |
|||||||||||||||||
|
and coil, 2×10 µs |
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
Temperature rise (at 20°C) |
Max. 50°C*3 |
|
|
|
|
|
|
|
Max. 50°C*4 |
||||||||||
|
|
|
|
|
|
Max. 4 ms |
|
|
|
|
|
|
|
|
|
||||
Operate time [Set time]*5 |
(Approx. 2 ms) |
|
|
|
|
|
|
|
Max. 4 ms |
||||||||||
(at 20°C) |
|
|
|
|
[Max. 4 ms |
|
|
|
|
|
|
(Approx. 2 ms) |
|||||||
|
|
|
|
|
|
(Approx. 2 ms)] |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
Max. 4 ms |
|
|
|
|
|
|
|
|
|
||||
Release time [Reset time]*6 |
(Approx. 1 ms) |
|
|
|
|
|
|
|
Max. 4 ms |
||||||||||
(at 20°C) |
|
|
|
|
[Max. 4 ms |
|
|
|
|
|
|
(Approx. 1 ms) |
|||||||
|
|
|
|
|
|
(Approx. 2 ms)] |
|
|
|
|
|
|
|
|
|
||||
M.B.B. time*12 |
|
— |
|
|
|
|
|
|
|
Min. 10 µs |
|||||||||
Shock |
|
Functional |
Min. 750 m/s2 {75 G}*7 |
|
|
Min. 500 m/s2 {50 G}*8 |
|||||||||||||
resistance |
|
Destructive*9 |
Min. 1,000 m/s2 {100 G} |
||||||||||||||||
Vibration |
|
Functional*10 |
10 to 55 Hz at double amplitude of 3.3 mm |
||||||||||||||||
resistance |
|
Destructive |
10 to 55 Hz at double amplitude of 5 mm |
||||||||||||||||
Conditions for opera- |
|
Ambient |
–40°C to +85°C –40°F to +185°F |
||||||||||||||||
tion, transport and |
|
temp. 2 |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
storage*11 (Not freez- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
ing and condensing |
|
Humidity |
5 to 85%R.H. |
||||||||||||||||
at low temperature) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
Unit weight |
|
Approx. 2 g .071 oz. |
|||||||||||||||||
*12 M.B.B. time: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Min. 10 µs |
||||||||||||
|
|
|
|
|
× Measuring |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
condition |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
500 Ω |
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
5 V DC |
|
|
|
|
|
|
|
160
TX-D
TYPICAL APPLICATIONS
•Facsimiles
•Modems
•Communication devices
ORDERING INFORMATION
|
1) Standard (B.B.M.)type |
|
|
|
|
|
|
|
Ex. TXD |
|
2 |
|
|
|
|
|
SA |
– |
|
L |
|
– |
|
|
|
|
– |
|
|
4.5V |
|
|
|
– |
|
Z |
|
|
|
|
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contact |
|
|
|
Surface-mount availability |
|
|
|
|
|
|
Operating function |
|
Terminal shape |
|
|
|
Coil voltage |
|
|
Packing style |
|
|
|||||||||||||||||||||||||||||||||||||||||
|
arrangement |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(DC) |
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
2: 2 Form C |
Nil: Standard PC board terminal or |
|
|
|
|
|
|
Nil: Single side |
|
|
|
Nil: Standard PC |
|
|
1.5, 3, 4.5, 5, |
Nil: Tube packing |
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
self-clinching terminal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
stable |
|
|
|
|
board terminal |
|
6, 9, 12, 24 V |
Z: Tape and reel packing |
||||||||||||||||||||||||||||||||||
|
|
|
|
SA: Standard surface-mount terminal |
|
|
|
|
|
|
L: 1 coil latching |
|
|
or surface- |
|
|
|
|
|
|
|
|
|
|
|
|
|
(Picked from the 8/9/ |
||||||||||||||||||||||||||||||||||||
|
|
|
|
SL: High connection reliability surface-mount |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mount type |
|
|
|
|
|
|
|
|
|
|
|
|
|
10/12-pin side) |
|
|
||||||||||||||||||||||||||||
|
|
|
|
|
terminal type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H: |
Self-clinching |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
SS: Space saving surface-mount terminal type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
terminal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2) M.B.B.type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Ex. TXD |
|
2 |
|
|
|
|
SA |
– |
2M |
|
– |
|
|
|
|
– |
|
|
4.5V |
|
|
|
– |
|
Z |
|
|
|
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contact |
|
|
|
Surface-mount availability |
|
|
|
|
|
|
Operating function |
|
Terminal shape |
|
|
|
Coil voltage |
|
|
Packing style |
|
|
|||||||||||||||||||||||||||||||||||||||||
|
arrangement |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(DC) |
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
2: 2 Form D |
Nil: Standard PC board terminal or |
|
|
|
|
|
|
2M: 2 M.B.B. type |
|
Nil: Standard PC |
|
|
1.5, 3, 4.5, 5, |
Nil: Tube packing |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
self-clinching terminal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
board terminal |
|
6, 9, 12, 24 V |
Z: Tape and reel packing |
||||||||||||||||||||||||||||
|
|
|
|
SA: Standard surface-mount terminal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
or surface- |
|
|
|
|
|
|
|
|
|
|
|
|
|
(Picked from the 8/9/ |
||||||||||||||||||||||||
|
|
|
|
SL: High connection reliability surface-mount |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mount type |
|
|
|
|
|
|
|
|
|
|
|
|
|
10/12-pin side) |
|
|
||||||||||||||||||||||||||||
|
|
|
|
|
terminal type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H: |
Selfclinching |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
SS: Space saving surface-mount terminal type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
terminal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||
|
Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number. suffix “-X” is needed when ordering. |
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
(ex.) TXD2SA-3V-X |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
|
Surface-mount terminal variation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
Variation |
|
|
|
|
|
|
Terminal style |
|
|
|
|
|
|
|
|
Usable conditions based on terminal connection solder reliability |
|
|
||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Normal environments (indoor) |
|
|
|
Drastic temperature fluctuations (outdoor) |
|||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.25 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8.4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.010 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
SA type |
|
|
|
|
|
|
|
|
|
.331 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended |
|
|
|
|
|
|
|
|
|
|
|
|
|
— |
|
|
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
5.08 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
|
(Standard surface-mount terminal type) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||
|
|
.200 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
9.4±0.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
.370±.020 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.25 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Max. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
SL type |
|
|
|
|
|
|
|
|
|
|
.010 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
10.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
(Highly connection reliability surface- |
|
|
|
|
.394 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended |
|
|
|
|
|
|
|
|
|
|
|
Recommended |
|
|
||||||||||||||||||||||||||||
|
|
|
|
|
5.08 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
mount terminal type) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
.200 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
9.4±0.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
.370±.020 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.25 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Max. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
SS type |
|
|
|
|
|
|
|
|
|
|
.010 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
10.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
.394 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
(Space saving surface-mount terminal |
|
5.08 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended |
|
|
|
|
|
|
|
|
|
|
|
Recommended |
|
|
|||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||
|
type) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
.200 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
7.4±0.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
.291±.020 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
OPERATION INFORMATION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||
|
Contact Operation |
|
|
Open |
|
|
|
|
|
|
|
During Operation |
|
Operation Complete |
|
|
During Reset |
|
|
Reset Complete |
||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
M.B.B. contact |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
operation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
N.C. |
COM |
N.O. |
|
|
|
N.C. |
|
|
COM |
N.O. |
|
N.C. |
|
COM |
N.O. |
|
N.C. |
|
COM |
N.O. |
|
|
N.C. |
COM |
N.O. |
||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
(B.B.M.) contact |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
operation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
N.C. |
COM |
N.O. |
|
|
|
N.C. |
|
|
COM |
N.O. |
|
N.C. |
|
COM |
N.O. |
|
N.C. |
|
COM |
N.O. |
|
|
N.C. |
COM |
N.O. |
|||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
161
TX-D
TYPES AND COIL DATA (at 20°C 68°F)
1. Standard (B.B.M.) type
(1) Standard PC board terminal and self-clinching terminal 1. Single side stable
Coil |
Part No. V DC |
Pick-up |
Drop-out |
Nominal |
Coil |
Nominal |
Max. |
||
Rating, |
Standard PC board |
Self-clinching |
voltage, |
voltage, |
operating |
resistance, |
operating |
allowable |
|
V DC (max.) |
V DC (min.) |
current, |
power, |
voltage, |
|||||
V DC |
terminal |
terminal |
Ω (±10%) |
||||||
(initial) |
(initial) |
mA (±10%) |
mW |
V DC |
|||||
|
|
|
|
||||||
1.5 |
TXD2-1.5V |
TXD2-H-1.5V |
1.13 |
0.15 |
132.7 |
11 |
200 |
1.8 |
|
3 |
TXD2-3V |
TXD2-H-3V |
2.25 |
0.3 |
66.7 |
45 |
200 |
3.6 |
|
4.5 |
TXD2-4.5V |
TXD2-H-4.5V |
3.38 |
0.45 |
44.4 |
101 |
200 |
5.4 |
|
5 |
TXD2-5V |
TXD2-H-5V |
3.75 |
0.5 |
40.0 |
125 |
200 |
6 |
|
6 |
TXD2-6V |
TXD2-H-6V |
4.5 |
0.6 |
33.3 |
180 |
200 |
7.2 |
|
9 |
TXD2-9V |
TXD2-H-9V |
6.75 |
0.9 |
22.2 |
405 |
200 |
10.8 |
|
12 |
TXD2-12V |
TXD2-H-12V |
9 |
1.2 |
16.7 |
720 |
200 |
14.4 |
|
24 |
TXD2-24V |
TXD2-H-24V |
18 |
2.4 |
9.6 |
2,504 |
230 |
28.8 |
2. 1 coil latching
Coil |
Part No. |
Set voltage, |
Reset |
Nominal |
Coil |
Nominal |
Max. |
||
|
|
voltage, |
operating |
operating |
allowable |
||||
Rating, |
Standard PC board |
Self-clinching |
V DC (max.) |
resistance, |
|||||
V DC (max.) |
current, |
power, |
voltage, |
||||||
V DC |
terminal |
terminal |
(initial) |
Ω (±10%) |
|||||
(initial) |
mA (±10%) |
mW |
V DC |
||||||
|
|
|
|
|
|||||
1.5 |
TXD2-L-1.5V |
TXD2-L-H-1.5V |
1.13 |
1.13 |
100.0 |
15 |
150 |
1.8 |
|
|
|
|
|
|
|
|
|
|
|
3 |
TXD2-L-3V |
TXD2-L-H-3V |
2.25 |
2.25 |
50.0 |
60 |
150 |
3.6 |
|
|
|
|
|
|
|
|
|
|
|
4.5 |
TXD2-L-4.5V |
TXD2-L-H-4.5V |
3.38 |
3.38 |
33.3 |
135 |
150 |
5.4 |
|
|
|
|
|
|
|
|
|
|
|
5 |
TXD2-L-5V |
TXD2-L-H-5V |
3.75 |
3.75 |
30.0 |
166 |
150 |
6 |
|
|
|
|
|
|
|
|
|
|
|
6 |
TXD2-L-6V |
TXD2-L-H-6V |
4.5 |
4.5 |
25.0 |
240 |
150 |
7.2 |
|
|
|
|
|
|
|
|
|
|
|
9 |
TXD2-L-9V |
TXD2-L-H-9V |
6.75 |
6.75 |
16.7 |
540 |
150 |
10.8 |
|
|
|
|
|
|
|
|
|
|
|
12 |
TXD2-L-12V |
TXD2-L-H-12V |
9 |
9 |
12.5 |
960 |
150 |
14.4 |
|
|
|
|
|
|
|
|
|
|
|
24 |
TXD2-L-24V |
TXD2-L-H-24V |
18 |
18 |
7.1 |
3,388 |
170 |
28.8 |
|
|
|
|
|
|
|
|
|
|
Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package.
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
(2) Surface-mount terminal
1. Single side stable
Coil |
|
Part No. |
Pick-up |
Drop-out |
Nominal |
Coil |
Nominal |
Max. |
|
Rating, |
|
|
Tape and reel |
voltage, |
voltage, |
operating |
resistance, |
operating |
allowable |
Tube packing |
|
V DC (max.) |
V DC (min.) |
current, |
power, |
voltage, |
|||
V DC |
|
packing |
Ω (±10%) |
||||||
|
|
(initial) |
(initial) |
mA (±10%) |
mW |
V DC |
|||
|
|
|
|
|
|||||
1.5 |
TXD2S -1.5V |
|
TXD2S -1.5V-Z |
1.13 |
0.15 |
132.7 |
11 |
200 |
1.8 |
3 |
TXD2S -3V |
|
TXD2S -3V-Z |
2.25 |
0.3 |
66.7 |
45 |
200 |
3.6 |
4.5 |
TXD2S -4.5V |
|
TXD2S -4.5V-Z |
3.38 |
0.45 |
44.4 |
101 |
200 |
5.4 |
5 |
TXD2S -5V |
|
TXD2S -5V-Z |
3.75 |
0.5 |
40.0 |
125 |
200 |
6 |
6 |
TXD2S -6V |
|
TXD2S -6V-Z |
4.5 |
0.6 |
33.3 |
180 |
200 |
7.2 |
9 |
TXD2S -9V |
|
TXD2S -9V-Z |
6.75 |
0.9 |
22.2 |
405 |
200 |
10.8 |
12 |
TXD2S -12V |
|
TXD2S -12V-Z |
9 |
1.2 |
16.7 |
720 |
200 |
14.4 |
24 |
TXD2S -24V |
|
TXD2S -24V-Z |
18 |
2.4 |
9.6 |
2,504 |
230 |
28.8 |
2. 1 coil latching
Coil |
|
Part No. |
Set voltage, |
Reset |
Nominal |
Coil |
Nominal |
Max. |
|
|
|
|
voltage, |
operating |
operating |
allowable |
|||
Rating, |
|
|
Tape and reel |
V DC (max.) |
resistance, |
||||
Tube packing |
|
V DC (max.) |
current, |
power, |
voltage, |
||||
V DC |
|
packing |
(initial) |
Ω (±10%) |
|||||
|
|
(initial) |
mA (±10%) |
mW |
V DC |
||||
|
|
|
|
|
|
||||
1.5 |
TXD2S -L-1.5V |
|
TXD2S -L-1.5V-Z |
1.13 |
1.13 |
100.0 |
15 |
150 |
1.8 |
|
|
|
|
|
|
|
|
|
|
3 |
TXD2S -L-3V |
|
TXD2S -L-3V-Z |
2.25 |
2.25 |
50.0 |
60 |
150 |
3.6 |
|
|
|
|
|
|
|
|
|
|
4.5 |
TXD2S -L-4.5V |
|
TXD2S -L-4.5V-Z |
3.38 |
3.38 |
33.3 |
135 |
150 |
5.4 |
|
|
|
|
|
|
|
|
|
|
5 |
TXD2S -L-5V |
|
TXD2S -L-5V-Z |
3.75 |
3.75 |
30.0 |
166 |
150 |
6 |
|
|
|
|
|
|
|
|
|
|
6 |
TXD2S -L-6V |
|
TXD2S -L-6V-Z |
4.5 |
4.5 |
25.0 |
240 |
150 |
7.2 |
|
|
|
|
|
|
|
|
|
|
9 |
TXD2S -L-9V |
|
TXD2S -L-9V-Z |
6.75 |
6.75 |
16.7 |
540 |
150 |
10.8 |
|
|
|
|
|
|
|
|
|
|
12 |
TXD2S -L-12V |
|
TXD2S -L-12V-Z |
9 |
9 |
12.5 |
960 |
150 |
14.4 |
|
|
|
|
|
|
|
|
|
|
24 |
TXD2S -L-24V |
|
TXD2S -L-24V-Z |
18 |
18 |
7.1 |
3,388 |
170 |
28.8 |
|
|
|
|
|
|
|
|
|
|
: For each surface-mounted terminal variation, input the following letter. SA type: A , SL type: L , SS type: S
Standard packing:40 pcs. (tube), 500 pcs. (tape and reel) in an inner package; 1,000 pcs. in an outer package
Notes:
1.Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2.In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
162