NAIS RP1-H-6V, RP1-H-9V, RP1-4.5V, RP1-5V, RP1-6V Datasheet

LOW PROFILE HIGH	RP-RELAYS
FREQUENCY RELAY

10.6	9
.417	.748
			4
			.157

mm inch

•High frequency relay with the low profile of 4 mm.157 inch

•Excellent high frequency characteristics Isolation: Min. 10dB (at 1.8 GHz) Insertion loss: Max. 1.0dB (at 1.8 GHz) V.S.W.R.: Max. 1.3 (at 1.8 GHz)

•High sensitivity in small size

Size: 10.6 × 9 × 4 mm .417 × .354 × .157 inch

Nominal operating power: 140 mW

SPECIFICATIONS

Contact

	Arrangement		1 Form C
	Contact material	Movable	Silver alloy
		Stationary	Gold-clad silver
	Initial contact resistance, max.		50 mΩ
	(By voltage drop 6 V DC 0.1 A)
		Nominal switch-	0.1 A 30 V DC
			Contact switching power: 1 W
	Rating	ing capacity
			(Max. 1.8 GHz); Contact carrying
			power: 3 W (Max. 1.2 GHz)
			1 W (Max. 1.8 GHz)
		Isolation	Min. 15 dB (at 1 GHz)
			Min. 10 dB (at 1.8 GHz)
	High frequency
			Max. 0.5 dB (at 1 GHz)
	characteristics	Insertion loss
			Max. 1 dB (at 1.8 GHz)
	(Impedance 50Ω)
		V.S.W.R.	Max. 1.2 (at 1 GHz)
			Max. 1.3 (at 1.8 GHz)
		Mechanical	5×106
	Expected life	(at 180 cpm)
	(min. opera-	Electrical	105 (0.1 A 30 V DC)
	tions)
			105 (1 W at 1.8 GHz;
		(at 20 cpm)
			V.S.W.R.: max. 1.3)
	Coil (at 25°C, 68°F)
	Voltage type		Nominal operating power
	1.5 to 12 V DC		140 mW
	24 V DC		270 mW

Characteristics

	Max. operating speed (at rated load)			20 cpm
	Initial insulation resistance*1			Min. 1,000 MΩ at 500 V DC
	Initial breakdown	Between open contacts		750 Vrms for 1 min.
	voltage*2
		Between contacts and coil		1,500 Vrms for 1 min.
	Operate time*3 (at nominal voltage)			Max. 3 ms
				(Approx. 1.5 ms)
	Release time(without diode)*3			Max. 2 ms
	(at nominal voltage)			(Approx. 1 ms)
	Temperature rise			Max. 50°Cwith nominal coil
				voltage across coil and at
				nominal switching capacity
	Shock resistance		Functional*4	Min. 500 m/s2 {50 G}
			Destructive*5	Min. 1,000 m/s2 {100 G}
			Functional*6	10 to 55 Hz
	Vibration			at double amplitude of 3 mm
	resistance
			Destructive	10 to 55 Hz
				at double amplitude of 5 mm
	Conditions for operation,		Ambient temp.	–40°C to 70°C
	transport and storage			–40°F to 158°F
	(Not freezing and condensing		Humidity	5 to 85% R.H.
	at low temperature)
	Unit weight			Approx. 1 g .04 oz

Remarks

* Specifications will vary with foreign standards certification ratings.

*1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10mA

*3 Excluding contact bounce time

*4 Half-wave pulse of sine wave: 11ms, detection time: 10 s *5 Half-wave pulse of sine wave: 6ms

*6 Detection time: 10 s

TYPICAL APPLICATIONS

•Antenna switching of mobile phone

•Switching signal of measuring equipment

ORDERING INFORMATION

Ex. RP	1	H	3V
Contact arrangement		Terminal shape

1:1 Form C

Nil: Standard PC board terminal

H: Self-clinching terminal

Note: Standard packing; Carton: 50 pcs. Case 1,000 pcs.

Coil voltage (DC)

1.5, 3, 4.5, 5, 6, 9, 12, 24 V

93

RP

TYPES ANE COIL DATA (at 20°C 68°F)

	Part No.		Nominal	Pick-up	Drop-out	Coil	Nominal	Nominal	Maximum.
							operating	operating	allowable
	Standard PC	Self-clinching	voltage,	voltage, max.	voltage, min.	resistance,
							current,	power,	voltage,
	board terminal	terminal	V DC	V DC	V DC	Ω (±10%)
							mA (±10%)	mW	V DC
	RP1-1.5V	RP1-H-1.5V	1.5	1.125	0.15	16	93.8	140	2.25
	RP1-3V	RP1-H-3V	3	2.25	0.3	64.3	46.7	140	4.5
	RP1-4.5V	RP1-H-4.5V	4.5	3.375	0.45	145	31.1	140	6.75
	RP1-5V	RP1-H-5V	5	3.75	0.5	178	28	140	7.5
	RP1-6V	RP1-H-6V	6	4.5	0.6	257	23.3	140	9
	RP1-9V	RP1-H-9V	9	6.75	0.9	579	15.6	140	13.5
	RP1-12V	RP1-H-12V	12	9	1.2	1,028	11.7	140	18
	RP1-24V	RP1-H-24V	24	18	2.4	2,133	11.3	270	28.8

DIMENSIONS

mm inch

Standard PC board terminal													PC board pattern (Copper-side view)
3.75																		5.08
	.148			10.6						9							.200			2.54
			.417							.354
																							.100

4
.157					7.62
3.5
					.300
.138
	0.5		0.25
(0.25)
(.010)	.020	7.62	.010
2.54	2.54		6-1 dia.
	.100	.300
.100			6-.039 dia.
Self-clinching terminal			Tolerance: ±0.1 ±.004
3.75	10.6	9	Schematic (Bottom view)
.148
	.417	.354	1	2	3
4
			+		–
.157
3.5
.138

(0.25)						0.5													0.25
(.010)										.020												.010		6	5	4
2.54									2.54						7.62
.100						.100									.300									Direction indication
											General tolerance: ±0.3 ±.012
																								Deenergized condition

REFERENCE DATA

Sample: RP1-6V

Measuring method: Impedance 50Ω

Measuring tool:

6–1.60 dia	mm inch
.063 dia

6–1.00 dia

.039 dia

			PC board
		26–0.80 dia	• Double-sided through hole
		.031 dia	• Material: Glass-epoxy resin
		6–2.30 dia	• t= 1.0mm .039 inch
			• Copper plated thickness: 35 m
		.090 dia
		18.92
	0.60	.745
		1.94
	.024
		.076
18.00	7.62	4.22 9.82
.709	.300	.166 .387
		5.08
		.200
		Soldering
		SMA connector

1. High frequency characteristics

• Isolation

		100
		90
dB		80
		70
Isolation,
		60
		50
		40
		30
		20
		10
		0
			0		0.2		0.4 0.6			0.8		1.0 1.2			1.4		1.6		1.8		2.0
											Frequency, GHz

• Insertion loss

	5
loss, dB	4
	3
Insertion
	2			N.O. (Terminal Nos. 5-6)
			N.C. (Terminal Nos. 4-5)
	1
	00	0.2	0.4 0.6	0.8	1.0 1.2	1.4	1.6	1.8	2.0

Frequency, GHz

94

• Return loss

		100
		90
dB		80
		70
loss,
		60
Return
		50
		40
		30			N.O. (Terminal Nos. 5-						6)
		20
		10		N.C. (Terminal Nos. 4-5)

0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

Frequency, GHz

• V.S.W.R

		3.0
		2.8
		2.6
V.S.W.R.		2.4
		2.2
		2.0
		1.8
		1.6
		1.4																					N.C.
		1.2																					N.O.
		1.0 0
				0.2		0.4		0.6		0.8		1.0		1.2		1.4		1.6		1.8		2.0
										Frequency, GHz