NAIS JTN1S-TMP-F-DC15V, JTN1S-TMP-F-DC12V, JTN1S-PA-F-DC5V, JTN1S-PA-F-DC24, JTN1S-PA-F-DC18 Datasheet

COMPACT ECONOMICAL 30 AMP. RELAY

JT-N RELAYS

FEATURES

•High switching capacity — 30 A for 1 Form A

•2 contact arrangements — 1 Form A or 1 Form C

•Sealed and “TMP” types available

•UL/CSA recognized (PCB & TMP type: UL508 group A spacing, UL873 spacing)

•Class F types standard for PCB & TMP type

PCB type

TMP type

SPECIFICATIONS

Contacts

		PCB & TMP type
Arrangement		1 Form A		1 Form C
Initial contact
resistance, max.			50 mΩ
(By voltage drop
method, 6 V DC 1
A)
Contact material			Silver alloy
	Max. switch-	8310 VA		N.C.: 2770 VA
	ing power			N.O.: 5440 VA
Rating	Max. switch-		277 V AC
	ing voltage
	Max. switch-	30 A		N.C.: 10 A
	ing current			N.O.: 20 A
			Min. 1×107
Expected life				N.O.:
				20 A 277 V AC
Mechanical
		20 A 277 V AC		Min. 1×105*
Electrical
		Min. 1×105*		N.C.:
(Resistive load)
				10 A 277 V AC
				Min. 1×105*

* For sealed types, the life shown is for open venting-hole condition.

Coil at 20°C 68°F

	PCB & TMP type
Minimum operating power	Approx. 450 mW
Nominal operating power	Approx. 800 mW

Characteristics

				PCB & TMP type
	Initial insulation resistance*1			Min. 100 MΩ at 500 V DC
	Initial	Between contacts		1,200 Vrms
	breakdown	Between contacts		2,500 Vrms
	voltage*2	and coil
	Operate time*3			Max. 15 ms
	(at nominal voltage)
	Release time (without diode)*3			Max. 10 ms
	(at nominal voltage)
	Shock		Functional*4	Min. 98 m/s2 {10 G}
	resistance		Destructive*5	Min. 980 m/s2 {100 G}
			Functional*6	Max. 88.2 m/s2 {9 G}, 10 to 55 Hz
	Vibration			at double amplitude of 1.5 mm
	resistance		Destructive	Max. 117.6 m/s2 {12 G}, 10 to 55 Hz
				at double amplitude of 2 mm
	Conditions for		Ambient	–55°C to +85°C –67°F to +185°F
	operation, trans-		temp.
	port and storage*7
	(Not freezing and		Humidity	5 to 85% R.H.
	condensing at low
	temperature)
				PCB type:
	Unit weight			Approx. 25 g (.88 oz)
				TMP type:
				Approx. 30 g (1.06 oz)

Remarks

* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Intial breakdown voltage” section *2 Detection current: 10 mA

*3 Excluding contact bounce time

*4 Half-wave pulse of sine wave: 11ms; detection time: 10 s *5 Half-wave pulse of sine wave: 6ms

*6 Detection time: 10 s

*7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).

TYPICAL APPLICATIONS

•Automotive

•Air conditioner

•Heating & ventilation

•Home appliance

118