NAIS AQW217AZ, AQW217AX, AQW217A, AQW217, AQW214AZ Datasheet

GU (General Use) Type

[2-Channel (Form A) Type]

PhotoMOS

RELAYS

	9.78	6.4
		.252
	.385

3.9±0.2

.154±.008

6.4

9.78 .252

.385

3.6±0.2

.142±.008

mm inch

1	8
2	7
3	6
4	5

FEATURES

1. Compact 8-pin DIP size

The device comes in a compact (W) 6.4 ×

(L) 9.78 ×(H) 3.9 mm (W) .252×(L)

.385×(H) .154 inch, 8-pin DIP size (through hole terminal type).

2.Applicable for 2 Form A use as well as two independent 1 Form A use

3.Controls low-level analog signals

PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.

4.High sensitivity, high speed response

Can control a maximum 0.13 A load cur-

5.Low-level off state leakage current

The SSR has an off state leakage current of several milliamperes whereas the PhotoMOS relays has only 100 pA even with the rated load voltage of 400 V (AQW214).

6.Low-level thermal electromotive force (Approx. 1 µV)

7.Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side

8.Stable ON resistance.

9.Eliminates the need for a power supply to drive the power MOSFET

TYPICAL APPLICATIONS

rent with a 5 mA input current. Fast oper-	• High-speed inspection machines
ation speed of 310 µs (typical). (AQW214)	• Telephones equipment
	• Computer

TYPES

1. AC/DC type

				Part No.
Output rating*		Through hole		Surface-mount terminal				Packing quantity
		terminal
Load voltage	Load current	Tube packing style			Tape and reel packing style			Tube	Tape and reel
60V	350 mA	AQW212	AQW212A		AQW212AX		AQW212AZ
100 V	300 mA	AQW215	AQW215A		AQW215AX		AQW215AZ	1 tube contains
200 V	160 mA	AQW217	AQW217A		AQW217AX		AQW217AZ
								40 pcs.	1,000 pcs.
350 V	120 mA	AQW210	AQW210A		AQW210AX		AQW210AZ	1 batch contains
								400 pcs.
400 V	100 mA	AQW214	AQW214A		AQW214AX		AQW214AZ
600 V	40 mA	AQW216	AQW216A		AQW216AX		AQW216AZ

*Indicate the peak AC and DC values.

Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal.

RATING

1. AC/DC type

1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)

	Item		Symbol	AQW212(A)	AQW215(A)	AQW217(A)	AQW210(A)	AQW214(A)	AQW216(A)	Remarks
	LED forward current		IF			50 mA
	LED reverse voltage		VR			3 V
Input	Peak forward current		IFP			1 A				f = 100 Hz,
										Duty factor = 0.1%
	Power dissipation		Pin			75 mW
	Load voltage		VL	60 V	100 V	200 V	350 V	400 V	600 V
	(peak AC)
	Continuous load		IL	0.35 A	0.30 A	0.16 A	0.12 A	0.10 A	0.04 A	( ): in case of using only 1 channel
Output	current			(0.40A)	(0.35 A)	(0.2 A)	(0.14 A)	(0.13 A)	(0.05 A)	A connection: Peak AC, DC
	Peak load current		Ipeak	1.0 A	0.9 A	0.48 A	0.36 A	0.3 A	0.12 A	A connection: 100 ms (1 shot),
										VL = DC
	Power dissipation		Pout			800 mW
Total power dissipation			PT			850 mW
I/O isolation voltage			Viso			1,500 V AC				Between input and output/
										between contact sets
Temperature		Operating	Topr		–40°C to +85°C –40°F to +185°F					Non-condensing at low
										temperatures
limits
		Storage	Tstg		–40°C to +100°C –40°F to +212°F
										57