NAIS RK1-12V, RK1-24V, RK1-3V, RK1-4.5V, RK1-5V Datasheet

1.5 GHz MICROWAVE RELAY RK-RELAYS

20.2	11.2
.795	.441

9.7

.382

mm inch

•Excellent high frequency characteristics Isolation: Min. 60dB (at 1.5 GHz) Insertion loss: Max. 0.3dB (at 900 MHz)

•V.S.W.R.: Max. 1.5 (at 900MHz)

•High sensitivity in small size

Size: 20.2 × 11.2 × 9.7 mm .795 × .441 × .382 inch

Nominal power consumption: 200 mW (single side stable type)

•Sealed construction for automatic cleaning

•Latching types are also available

SPECIFICATIONS

Contact

	Arrangement			1 Form C
	Contact material			Gold-clad
	Initial contact resistance, max.			100 mΩ
	(By HP4328A)
		Max. switching power		10 W
		Max. switching voltage		30 V DC
	Rating
		Max. switching current		0.5 A
		Nominal switching		0.01 A 24 V DC 10 W (at
		capacity		1.2 GHz, Impedance 50Ω)
	High frequency	Isolation		Min. 60 dB (at 1.5 GHz)
	characteristics	Insertion loss		Max. 0.3 dB (at 900 MHz)
	(Impedance 50Ω)
		V.S.W.R.		Max. 1.5 (at 900 MHz)
	Expected	Mechanical		5×106
	life (min.	Electrical	0.01 A 24 V DC	3×105
	operations)
			10 W 1.2 GHz	105
	Coil (at 25°C, 68°F)
				Nominal operating power
	Single side stable			200 mW
	1 coil latching			200 mW
	2 coil latching			400 mW

Characteristics

	Initial insulation resistance*1			Min. 100 MΩ at 500 V DC
	Initial	Between open contacts		500 Vrms
		Between contact and coil		1,000 Vrms
	breakdown
		Between contact and
	voltage*2			500 Vrms
		earth terminal
	Operate time [Set time]*3 (at nominal voltage)			Approx. 6 ms [Approx. 5ms]
	Release time (without diode) [Reset time]*3			Approx. 3 ms [Approx. 5ms]
	(at nominal voltage) *2
	Temperature rise			Max. 60°Cwith nominal coil
				voltage across coil and at
				nominal switching capacity
	Shock resistance		Functional*4	Min. 196 m/s2 {20 G}
			Destructive*5	Min. 980 m/s2 {100 G}
			Functional*6	10 to 55 Hz
	Vibration			at double amplitude of 3 mm
	resistance		Destructive	10 to 55 Hz
				at double amplitude of 5 mm
	Conditions for operation,		Ambient temp.	–40°C to 60°C
	transport and storage			–40°F to 140°F
	(Not freezing and condensing		Humidity	5 to 85% R.H.
	at low temperature)
	Unit weight			Approx. 4.4 g .155 oz

Remarks

* Specifications will vary with foreign standards certification ratings.

*1 Measurement at same location as “Initial breakdown voltage” section *2 Detection current: 10mA

*3 Excluding contact bounce time

*4 Half-wave pulse of sine wave: 11ms, detection time: 10 s *5 Half-wave pulse of sine wave: 6ms

*6 Detection time: 10 s

TYPICAL APPLICATIONS

•Audio visual equipment broadcast satellite tuners VCRs, CATVs, TVs

•Communication equipment automobile telephones maritime telephones

•Instrumentation test equipment

measuring equipment

ORDERING INFORMATION

Ex. RK

1

L2

24V

Contact arrangement

Operating function

Coil voltage, DC

1: Standard type

Nil: Single side stable

3, 4.5, 5, 6, 9, 12,

1R: R type

L: 1 coil latching

24 V

(See Schematic on next page.)

L2: 2 coil latching

Note: Standard packing; Carton: 50 pcs. Case 500 pcs.

101

RK

TYPES ANE COIL DATA (at 20°C 68°F)

• Single side stable type

			Nominal	Pick-up	Drop-out	Coil	Nominal	Nominal	Maximum.
	Part No.		voltage,	voltage, max.	voltage, min.	resistance,	operating	operating	allowable
									voltage, V DC
			V DC	V DC	V DC	Ω (±10%)	current, mA	power, mW	(at 60°C 140°F)
RK1-3V		RK1R-3V	3	2.25	0.3	45	66.7	200	3.3
RK1-4.5V		RK1R-4.5V	4.5	3.38	0.45	101	44.4	200	4.95
RK1-5V		RK1R-5V	5	3.75	0.5	125	40.7	200	5.5
RK1-6V		RK1R-6V	6	4.5	0.6	180	33.3	200	6.6
RK1-9V		RK1R-9V	9	6.75	0.9	405	22.2	200	9.9
RK1-12V		RK1R-12V	12	9	1.2	720	16.7	200	13.2
RK1-24V		RK1R-24V	24	18	2.4	2,880	8.3	200	26.4

• 1 coil latching type

		Nominal	Set	Reset	Coil	Nominal	Nominal	Maximum.
Part No.		voltage,	voltage, max.	voltage, max.	resistance,	operating	operating	allowable
								voltage, V DC
		V DC	V DC	V DC	Ω (±10%)	current, mA	power, mW	(at 60°C 140°F)
RK1-L-3V	RK1R-L-3V	3	2.25	2.25	45	66.7	200	3.3
RK1-L-4.5V	RK1R-L-4.5V	4.5	3.38	3.38	101	44.4	200	4.95
RK1-L-5V	RK1R-L-5V	5	3.75	3.75	125	40	200	5.5
RK1-L-6V	RK1R-L-6V	6	4.5	4.5	180	33.3	200	6.6
RK1-L-9V	RK1R-L-9V	9	6.75	6.75	405	22.2	200	9.9
RK1-L-12V	RK1R-L-12V	12	9	9	720	16.7	200	13.2
RK1-L-24V	RK1R-L-24V	24	18	18	2,880	8.3	200	26.4

• 2 coil latching type

		Nominal	Set	Reset	Coil	Nominal	Nominal	Maximum.
Part No.		voltage,	voltage, max.	voltage, max.	resistance,	operating	operating	allowable
								voltage, V DC
		V DC	V DC	V DC	Ω (±10%)	current, mA	power, mW	(at 60°C 140°F)
RK1-L2-3V	RK1R-L2-3V	3	2.25	2.25	22.5	133.3	400	3.3
RK1-L2-4.5V	RK1R-L2-4.5V	4.5	3.38	3.38	50.6	88.9	400	4.95
RK1-L2-5V	RK1R-L2-5V	5	3.75	3.75	62.5	80	400	5.5
RK1-L2-6V	RK1R-L2-6V	6	4.5	4.5	90	66.7	400	6.6
RK1-L2-9V	RK1R-L2-9V	9	6.75	6.75	202.5	44.4	400	9.9
RK1-L2-12V	RK1R-L2-12V	12	9	9	360	33.3	400	13.2
RK1-L2-24V	RK1R-L2-24V	24	18	18	1,440	16.7	400	26.4

DIMENSIONS

		mm inch
PC board pattern (Copper-side view)	Schematic (Bottom view)
(Single side stable and	Standard contact arrangement	R type contact arrangement

										20.2																					11.2
										.795																					.441
																								9.1
																								.358
																			3.5			0.6
																			.138
2.54																							.024
																																	7.62
.100																																	.300
					(Single side stable and
																											2-0.6×0.3
1							coil latching)																				2-.024×.012
																												Stand-off
3-0.45																											4-0.6×0.25
3-.018																											4-.024×.010
(2							coil latching)																				3-0.6×0.3
																											3-.024×.012
																												Stand-off
3-0.45																											4-0.6×0.25
3-.018																											4-.024×.010

1 coil latching)

9-0.9 dia.
9-.035 dia.
	2.54
2.54	.100
.100
7.62
.300

(2 coil latching)

10-0.9 dia.
10-.035 dia.
	2.54
2.54	.100
.100
7.62
.300
Tolerance: ±0.1 ±.003

	RK1							RK1R
–1						+7 Single side	–1						+7
						stable
						(Deenergized
14	13	12	11	10	9	condition)	14	13	12	11	10	9	8
						8
N.C.		COM			N.O.		N.O.		COM			N.C.

	RK1-L							RK1R-L
+1						–7 1 coil	+1						–7
						latching
						(Reset
14	13	12	11	10	9	condition)	14	13	12	11	10	9	8
						8
RESET		COM			SET		SET		COM			RESET

	RK1-L2								RK1R-L2
1					6	7	2 coil	1					6	7
–					+	+	latching	–					+	+
							(Reset
14	13	12	11	10	9	8	condition)	14	13	12	11	10	9	8
RESET		COM			SET			SET		COM			RESET

General tolerance: ±0.3 ±.012

102