NAIS AGQ210S4HZ, AGQ210S4H, AGQ210S24, AGQ210S1HZ, AGQ210S1HX Datasheet

GTESTINGQ

ULTRA-SMALL PACKAGE GQ-RELAYS

FLAT POLARIZED RELAY

	7.20±0.3
10.60±0.3	.283±.012
.417±.012	5.20±0.2
	.205±.008

7.20±0.3

10.60±0.3 .283±.012

.417±.012

Max.5.40

.213

mm inch

FEATURES

• Compact flat body saves space

With a small footprint of 10.6 mm (L) × 7.2 mm (W) .417 inch (L) × .283 inch (W) for space savings, it also has a very short height of 5.2 mm .205 inch. (Standard PC board type.)

•Outstanding surge resistance.

Surge withstand between open contacts: 1,500 V 10×160 µs (FCC part 68)

Surge withstand between contacts and coil: 2,500 V 2×10 µs (Bellcore)

•The use of twin crossbar contacts ensures high contact reliability.

AgPd contact is used because of its good sulfide resistance. Adopting low-gas molding material. Coil assembly molding technology which avoids generating volatile gas from coil.

•Increased packaging density

Due to highly efficient magnetic circuit design, leakage flux is reduced and changes in electrical characteristics from components being mounted close-together are minimized. This all means a packaging density higher than ever before.

•Nominal operating power: 140 mW

•Outstanding vibration and shock resistance.

Functional shock resistance: 750 m/s2 {75G}

Destructive shock resistance: 1,000 m/s2 {100G}

Functional vibration resistance:

10 to 55 Hz (at double amplitude of 3.3 mm .130 inch)

Destructive vibration resistance:

10 to 55 Hz (at double amplitude of 5 mm

.197 inch)

SPECIFICATIONS

Contact

	Arrangement				2 Form C
	Initial contact resistance, max.				100 mΩ
	(By voltage drop 6 V DC 1A )
	Contact material				Stationary: AgPd+Au clad
					Movable: AgPd
			Nominal switching capacity		1 A 30 V DC
			(resistive load)		0.3 A 125 V AC
			Max. switching power		30 W, 37.5 V A
	Rating		(resistive load)
			Max. switching voltage		110 V DC, 125 V AC
			Max. switching current		1 A
			Min. switching capacity 1		10 µA 10 mV DC
	Nominal		Single side stable		140mW (1.5 to 12 V DC)
					230mW (24 V DC)
	operating
					100mW (1.5 to 12 V DC)
	power		1 coil latching
					120mW (24 V DC)
			Mechanical (at 180 cpm)		5 × 107
	Expected			1 A 30 V DC	105
	life (min.		Electrical	resistive
	operations)		(at 20 cpm)	0.3 A 125 V AC	105
				resistive

Remarks:

* Specifications will vary with foreign standards certification ratings.

*1 Measurement at same location as "Initial breakdown voltage" section. *2 Detection current: 10mA.

*3 Nominal voltage applied to the coil, excluding contact bounce time.

*4 By resistive method, nominal voltage applied to the coil; contact carrying current: 1 A.

*5 Half-wave pulse of sine wave: 6 ms;detection time: 10 s. *6 Half-wave pulse of sine wave: 6 ms.

*7 Detection time: 10 s.

*8 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61)

Characteristics

	Initial insulation resistance*1				Min. 1,000MΩ (at 500V DC)
	Initial	Between open contacts			750 Vrms for 1min.
	breakdown	Between contact sets			1,000 Vrms for 1min.
	voltage*2	Between contacts and coil			1,500 Vrms for 1min.
		Between open contacts			1,500 V(FCC Part 68)
	Initial surge	(10×160 µs)
	voltage	Between contacts and coil			2,500 V(Bellcore)
		(2×10 µs)
	Operate time [Set time]*3 (at 20°C)				Max. 4 ms (Approx. 2 ms)
					[Max. 4 ms (Approx. 2 ms)]
	Release time (without diode)				Max. 4 ms (Approx. 1 ms)
	[Reset time]*3 (at 20°C)				[Max. 4 ms (Approx. 2 ms)]
	Temperature rise*4 (at 20°C)				Max. 50°C
	Shock resistance			Functional*5	Min. 750 m/s2{75G]
				Destructive*6	Min. 1,000 m/s2{100G]
				Functional*7	10 to 55 Hz at double
					amplitude of 3.3 mm
	Vibration resistance
				Destructive	10 to 55 Hz at double
					amplitude of 5 mm
	Conditions for opera-			Ambient	–40°C to 85°C
	tion, transport and			temperature 2	–40°F to 185°F
	storage*8
	(Not freezing and con-			Humidity	5 to 85% R.H.
	densing at low tem-
	perature)
	Unit weight				Approx. 1 g .035 oz

Notes:

1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.

2 The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from –40 to +70°C –40° to +158°F.

129

GQ

TYPICAL APPLICATIONS

• Telephone exchange, transmission	• Home appliances, and audio/visual
equipment	equipment
• Communications devices	• Handheld and portable products
• Measurement devices

ORDERING INFORMATION

Ex. AGQ

2

0

0

A

1

H

Z

Contact arrangement

Operating function

Type of operation

Terminal shape

Coil voltage (DC)

Packing style

2: 2 Form C

0: Single side stable

0: Standard type

Nil: Standard PC board terminal

1H: 1.5V

09

: 9V

Nil: Tube packing

1: 1 coil latching

(B.B.M.)

A: Surface-mount terminal A type

03 : 3V

12

: 12V

Z: Tape and reel packing

S: Surface-mount terminal S type

4H: 4.5V

24

: 24V

(piked from 5/6/7/8

06 : 6V

pin side)

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. Suffix “X” instead of “Z”.

TYPES AND COIL DATA (at 20°C 68°F)

(1) Standard PC board terminal

		Part No.		Pick-up volt-	Drop-out	Nominal		Nominal	Max. allowable
	Operating		Coil Rating,	age, V DC	voltage,	operating	Coil resistance,
		Standard PC						operating	voltage,
	Function		V DC	(max.)	V DC (min.)	current,	Ω (±10%)
		board terminal						power, mW	V DC
				(initial)	(initial)	mA (±10%)
		AGQ2001H	1.5	1.13	0.15	93.8	16	140	2.25
		AGQ20003	3	2.25	0.3	46.7	64.2	140	4.5
	Single side	AGQ2004H	4.5	3.38	0.45	31	145	140	6.75
		AGQ20006	6	4.5	0.6	23.3	257	140	9
	stable
		AGQ20009	9	6.75	0.9	15.5	579	140	13.5
		AGQ20012	12	9	1.2	11.7	1,028	140	18
		AGQ20024	24	18	2.4	9.6	2,504	230	28.8
		Part No.		Set voltage,	Reset voltage,	Nominal		Nominal	Max. allowable
	Operating		Coil Rating,			operating	Coil resistance,
		Standard PC		V DC (max.)	V DC (max.)			operating	voltage,
	Function		V DC			current,	Ω (±10%)
		board terminal		(initial)	(initial)			power, mW	V DC
						mA (±10%)
		AGQ2101H	1.5	1.13	1.13	66.7	22.5	100	2.25
		AGQ21003	3	2.25	2.25	33.3	90	100	4.5
	1 coil	AGQ2104H	4.5	3.38	3.38	22.2	202.5	100	6.75
		AGQ21006	6	4.5	4.5	16.7	360	100	9
	latching
		AGQ21009	9	6.75	6.75	11.1	810	100	13.5
		AGQ21012	12	9	9	8.3	1,440	100	18
		AGQ21024	24	18	18	5.0	4,800	120	36

1)Standard packing: 50 pcs. in an inner package (tube); 1,000 pcs. in an outer package

2)Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

(2) Surface-mount terminal

		Part No.			Pick-up	Drop-out	Nominal	Coil	Nominal	Max.
	Operating			Coil Rating,	voltage,	voltage,	operating		operating	allowable
			Tape and reel					resistance,
	Function	Tube packing		V DC	V DC (max.)	V DC (min.)	current,		power,	voltage,
			packing					Ω (±10%)
					(initial)	(initial)	mA (±10%)		mW	V DC
		AGQ200 1H	AGQ200 1HZ	1.5	1.13	0.15	93.8	16	140	2.25
		AGQ200 03	AGQ200 03Z	3	2.25	0.3	46.7	64.2	140	4.5
	Single side	AGQ200 4H	AGQ200 4HZ	4.5	3.38	0.45	31	145	140	6.75
		AGQ200 06	AGQ200 06Z	6	4.5	0.6	23.3	257	140	9
	stable
		AGQ200 09	AGQ200 09Z	9	6.75	0.9	15.5	579	140	13.5
		AGQ200 12	AGQ200 12Z	12	9	1.2	11.7	1,028	140	18
		AGQ200 24	AGQ200 24Z	24	18	2.4	9.6	2,504	230	28.8

: For each surface-mounted terminal variation, input the following letter.

Atype: A, S type: S

1)Standard packing: 50 pcs.(tube), 900pcs. (tape and reel)in an inner package; 1,000 pcs.(tube), 1,800pcs. (tape and reel)in an outer package

2)Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

130