KitchenAid 5KSM165PSCPT0, 5KSM165PSCPH0, 5KSM165PSCLR0, 5KSM165PSCHT0, 5KSM165PSCGU0 Owner’s Manual

5K45 5KSM45 - 5KSM180

TABLE OF CONTENTS

PARTS AND FEATURES

Parts And Accessories 3

STAND MIXER SAFETY

Important Safeguards 4 Save These Instructions 5 Electrical Requirements 6

USING THE STAND MIXER

Speed Control Guide 7 Accessory Guide 8 Attaching/Removing The Bowl 9 Lifting/Lowering The Motor Head 9 Attaching/Removing The Flat Beater, Flex Edge

Beater*, Wire Whip, Or Dough Hook 10 Beater To Bowl Clearance 11 Placing/Removing The Pouring Shield* 11 Using The Pouring Shield* 12 Operating The Speed Control 13 Optional Attachments 13

TIPS FOR GREAT RESULTS

Egg Whites 15 Whipped Cream 15 Mixing Tips 15

CARE AND CLEANING 16 TROUBLESHOOTING 17

PARTS AND FEATURES

PARTS AND ACCESSORIES

Attachment hub

Motor head

Speed control lever

Beater height adjustment

screw (not shown)

Bowl clamping plate

Attachment knob

Pouring shield*

Motor head locking lever (not shown)

Beater shaft

3 L stainless steel bowl*

Dough hook

Bowl**

Flat beater

Flex Edge beater*

Wire whip

*Included with select models only. Also available as optional accessory.

STAND MIXER SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1.Read all instructions. Misuse of appliance may result in personal injury.

2.To protect against risk of electrical shock, do not put Stand Mixer in water or other liquid.

3.This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

4.Unplug Stand Mixer from outlet when not in use, before putting on or taking off parts and before cleaning.

5.Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from beater during operation to reduce the risk of injury to persons and/or damage to the Stand Mixer.

STAND MIXER SAFETY

	or plug or after the Stand Mixer malfunctions, or is	ENGLISH
6.	Do not operate Stand Mixer with a damaged cord
	dropped, or damaged in any manner.
7.	The use of attachments not recommended or sold by
	KitchenAid may cause fire, electrical shock or injury.
8.	Do not use the Stand Mixer outdoors.
9.	Do not let the cord hang over edge of table or counter.
10.	Remove flat beater, wire whip, or dough hook fro
	Stand Mixer before washing.
11.	Children should be supervised to ensure that they do
	not play with the appliance.
12.	If the supply cord is damaged, it must be replaced
	by the manufacturer, its service agent, or similarly
	qualified persons in order to avoid a hazard.
13.	Never leave the appliance unattended while it is in
	operation.
14.	To avoid product damage, do not use the Stand Mixer
	bowls in areas of high heat such as an oven,
	microwave, or on a stovetop.
15.	Refer to the “Care and Cleaning” section for
	instructions on cleaning the surfaces in contact with
	food.
16. This appliance is intended to be used in household and
	similar applications such as:
	- staff kitchen areas in shops, offices, or other working
	environments;

- farmhouses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

SAVE THESE INSTRUCTIONS

STAND MIXER SAFETY

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard Plug into an earthed outlet. Do not remove earth prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Wattage:

300 Watts MAX for 5KSM125 - 5KSM180 Series

275 Watts MAX for 5K45, 5KSM45, 5KSM95 Series

Voltage: 220-240 V

Hertz: 50-60 Hz

NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way.

Do not use an adapter.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.