SR-750
Table of contents
Loading...
1
SR-750_AFM_E
Fixed Mount 2D Code Reader
SR-750 Series
Additional Functions
Manual
Symbols
This user's manual uses the following symbols that alert you to important
messages. Be sure to read these messages carefully.
Important
Cautions as to operation that is always performed are shown.
Point
Cautions as to operation that can be easily performed incorrectly
are shown.
Reference
Matters that will help the user improve understanding of the text and
useful information are shown.
The items and pages to be referred to in this document are shown.
Introduction
This manual describes the additional functions included in the "SR-750 Series 2D
Code Reader". Before operating, please read this manual thoroughly so that you
can completely understand and utilize the additional functions of the SR-750
Series.
Keep this manual handy along with the "SR-750 Series User's Manual" for quick
future reference.
Table of Contents
1 Details of Additional Functions................................................................... 1
2 Details of Additional Symbols..................................................................... 1
3 Details of Japanese Pharmaceutical Code Quality
Verification Function................................................................................... 3
4 Modifications to AutoID Network Navigator................................................ 5
5 Modified and Added Configuration Commands .........................................6
6 Other Modifications .................................................................................... 7
7 Precautions ................................................................................................ 7
DANGER
It indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
It indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
It indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
It indicates a situation which, if not avoided, could result in product
damage as well as property damage.
352GB
1 Details of Additional Functions
The SR-750 Series incorporates the following additional functions since Ver1.2.
Expansion of read code types
It is now possible to read the following code types.
List of newly supported code types
• PDF417
•MicroPDF417
• Composite Code (CC-A, CC-B, CC-C)
•CODE93
• 2of5 (Industrial 2of5)
•COOP 2of5
• Trioptic CODE39
[List of conventionally supported code types]
•QR
•MicroQR
• DataMatrix(ECC200)
• GS1 DataMatrix
• GS1 DataBar
•CODE39
• CODE39 FullASCII
•ITF
• NW-7(Codabar)
•CODE128
• GS1-128
• JAN/EAN/UPC
For detailed setting of new code types, refer to "2 Details of Additional
Symbols" (Page 1).
Print quality control of code symbols printed on
Japanese pharmaceuticals
The system supports the "Japanese Pharmaceutical Code quality verification
function" to enable the print quality control of code symbols printed on Japanese
pharmaceuticals recommended by the New Guideline for Barcode Labeling on
Prescription Drugs" issued in 2012.
For pharmaceuticals, the printable area of code symbols tends to be reduced due
to the product properties. Therefore, the composite symbols or similar are used,
which can be printed on a reduced space.
Since the printable area is limited, a low print quality of code symbols can cause
such field symptoms as the failure to read codes with the general-purpose barcode
reader (2D code reader) .
To prevent such risks, the print quality control of code symbols has been
recommended.
The "Japanese Pharmaceutical Code quality verification function" of the SR-750
Series can perform the code quality verification while maintaining the conventional
high reading performance.
This allows for the code reading and code quality qualification when transporting
the products.
For the "Japanese Pharmaceutical Code quality verification function", refer to
"3 Details of Japanese Pharmaceutical Code Quality Verification Function"
(Page 3).
2 Details of Additional Symbols
Number of digits read
* Since Trioptic CODE39 is an extended function of CODE39, the number of digits read
is 3 to 50, equal to that of CODE39.
Symbology Maximum digits Minimum digits
PDF417, MicroPDF 2710 1
CC-A/B(GS1 DataBar) 338 1
CC-A/B(EAN/UPC) 338 1
CC-A/B/C(GS1-128) 2361 1
CODE93 50 1
2of5 (Industrial 2of5) 50 1
COOP 2of5 50 2
2
SR-750_AFM_E
Appended data details (for the additional codes)
z Code Types
z Symbol Identifier
z Format of symbol ID for composite code
The symbol ID for composite code is output in the following data format:
Data format for composite code
Composite code :
(Example of GS1/CODE128+PDF)
Composite code :
(Example of JAN/EAN/UPC+PDF)
* m = Numeric value
* a = Composite delimiter (Can be changed with setting, up to 5 characters)
(Default: No setting)
PDF417, MicroPDF
PDF417....................................Check this to allow reading of PDF417.
MicroPDF .................................Check this to allow reading of MicroPDF.
* Be sure to check either one.
CC-A/B(GS1 DataBar)
GS1 DataBar Truncated...........Check this to allow reading of GS1 DataBar
Omnidirectional/GS1 DataBar Truncated.
............Check this to allow reading of GS1 DataBar
Stacked/GS1 DataBar Stacked Omnidirectional.
GS1 DataBar Limited ...............Check this to allow reading of GS1 DataBar
Limited.
Code Type Code Type ID
PDF417, MicroPDF 3
CC-A/B(GS1 DataBar) 14
CC-A/B(EAN/UPC) 15
CC-A/B/C(GS1-128) 16
CODE93 13
2of5 (Industrial 2of5) 8
COOP 2of5 12
Code Type Details Symbol Identifier
PDF417, MicroPDF
Standard ]L0
Extended channel
interpretation
]L1
Basic channel
interpretation
]L2
CODE93 ]G0
2of5 (Industrial 2of5) ]S0
COOP 2of5 ]X0
Trioptic CODE39 ]A8
]e0 Bar code data a 2D code data
]Em Bar code data a ]e0 2D code data
GS1
D
ata
B
ar
S
tac
k
e
d
(Omnidirectional)
GS1 DataBar Expanded...........Check this to allow reading of GS1 DataBar
Expanded.
.............Check this to allow reading of GS1 DataBar
Expanded Stacked.
..... Set the GS1 DataBar Expanded Stacked (Number
of rows).
.............Set the quiet zone scale factor.
CC-A/B(EAN/UPC)
UPC-A output...........................When reading UPC-A, select whether to output the
data as 12 or 13 digits.
.............Check this to append a "0" to the head of read data.
2-digit supplemental .................Check this to read 2-digit supplemental characters.
5-digit supplemental .................Check this to read 5-digit supplemental characters.
.............Check this to allow reading of the UPC code with
supplemental characters only.
GTIN 14 digits output ..............Add a "0" to the head of the data and output as 14
digits.
Quiet zone scale factor (4-11)
.......Set the quiet zone scale factor.
CC-A/B/C(GS1-128)
CC-C code ...............................Check this to allow reading of CC-C.
Quiet zone scale factor (4-11)
.......Set the quiet zone scale factor.
CODE93
Quiet zone scale factor (4-11)
.......Set the quiet zone scale factor.
2of5 (Industrial 2of5)
Quiet zone scale factor (4-11)
.......Set the quiet zone scale factor.
GS1
D
ata
B
ar
Expanded Stacked
GS1
D
ata
B
ar
E
xpan
d
e
d
Stacked (Number of rows) (2-11
)
Li
m
i
te
d
r
i
g
h
t space
scaling factor (0-11)
Add
'0'
as system co
de
UPC-E
I
gnore
UPC
w
i
t
h
out
supplemental
3
SR-750_AFM_E
COOP2of5
Quiet zone scale factor (4-11)
.......Set the quiet zone scale factor.
CODE39(Trioptic CODE39)
Trioptic CODE39...................... Check this to allow reading of Trioptic CODE39.
3 Details of Japanese Pharmaceutical
Code Quality Verification Function
Symbology for code quality verification
•GS1-128
• GS1 DataBar Limited
• GS1 DataBar Stacked
• CC-A (GS1 DataBar Limited)
• CC-A (GS1 DataBar Stacked)
Settings of the Japanese Pharmaceutical Code quality
verification function
To use the Japanese Pharmaceutical Code quality verification function, you need
to enable the verification settings.
(1) Setting using the AutoID Network Navigator
Press the "Code quality verification" button on the "Operation" tab in the
Settings view, and then check "Japanese Pharmaceuticals". In addition, select
the code to be verified.
Name of verification function Explanation
Japanese Pharmaceutical Code quali ty
verification
Function for evaluating the print quality of codes on
pharmaceuticals, recommended by the Safety
Division of Pharmaceutical and Food Safety Bureau
and the Economic Affairs Division of Health Policy
Bureau under the Ministry of Health, Labour and
Welfar e.
It makes reference to ISO/IEC15415 and ISO/
IEC15416.
(2) Setting using the setup commands
Send commands that enable the Japanese Pharmaceutical Code quality
verification function.
For configuration commands, refer to "5 Modified and Added Configuration
Commands" (Page 6).
Point
When the Code quality verification function is enabled, the decode
time becomes longer than when it is disabled.
Perform calibration after enabling the Code quality verification
function or set the decode timeout period required for reading.
Use the tact measurement test mode to confirm that there is no
problem with the reading time for operation.
Other settings, functions, and precautions regarding the
code quality verification
The following settings, functions, and precautions are similar to those of ISO/
IEC15415.
For details, refer to "3-11 Code quality verification function in SR-750 Series
User's Manual".
• Append Code quality verification result data
• For the data format with data appended, refer to "Other Modifications" (Page
7).
• Code quality verification function Evaluation standard
• Functions that can use evaluation results of the Code quality verification function
• Notes when using the Code quality verification function
Description of verification items
Japanese Pharmaceutical Code quality verification
(GS1 DataBar Limited, GS1 DataBar Stacked, GS1-128)
Decode success/failure DEC (Decode)
Description Evaluates whether decoding is possible or not.
-
Calculation
formula
-
Criterion
A : Success
F : Failure
Number of edges EDGE (EdgeDetermination)
Description
Determines whether the read number of edges
is equal to the assumed number of e dges.
-
Calculation
formula
-
Criterion
A:Match
F:Mismatch
Symbol contrast SC (Symbol Contrast)
Description
Evaluates the difference between the
maximum brightness value (Rmax) and
minimum brightness value (Rmin) in the code
area.
-
Calculation
formula
SC = Rmax – Rmin
Criterion
A:SC ≥ 70 %
B:SC ≥ 55 %
C:SC ≥ 40 %
D:SC ≥ 20 %
F:SC < 20 %
Minimum Reflectance
MINR
(Minimum Reflectance)
Description
Minimum reflectance among scanned
waveforms
-
Calculation
formula
-
Criterion
A:Rmin ≤ 0.5 Rmax
F : Rmin > 0.5 Rmax
Loading...